Search results for "Wax"
showing 10 items of 107 documents
Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant
1995
Abstract Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant were analyzed by GC/ECD and GC/MS. Wax and the rest of the needles were analyzed separately. As a rule the concentrations of α-HCH (0.5–13.6 ng/g), γ-HCH (0.4–7.3 ng/g), HCB (0.2–3.4 ng/g), PCB congeners (0.2–67 ng/g), PCDDs and PCDFs were higher in the older needles. The ratio of the concentration in the wax to the concentration in the rest of the needles was higher in the younger needles. The concentrations of PCB congeners, TeCDDs and TeCDFs were higher in the needles collected in the area nearest to the plant. The samples, obviously, co…
Preliminary study on analysis and removal of wax from a Carrara marble statue
2015
This preliminary study has mainly focused on the wax identification by nuclear magnetic resonance (NMR) and removal. Wax is used for many purposes in the field of art as protective coatings on wooden, stone or metal objects. From the comparison of the spectra H NMR and in particular with the correspondence of the resonance peaks of the samples taken from the statue and beeswax and paraffin, we can conclude that the wax applied on the statue surface is beeswax. From our data, it can be concluded that, to remove the beeswax, from any stone support, the more effective solvent is the mixture of cyclohexane/ethyl acetate. The removal percentages ranged from 19 to 99%. Lower percentages of remova…
Synthesis, characterization and ethylene polymerization by metallasilsesquioxane
2013
Soluble complexes of group (IV) metallocenes anchored on a substituted polyhedral oligomeric silsesquioxane trisilanol support were prepared and characterized. These catalyst precursors formulated as [M(O^O^O)X] are found to be active in polymerization of ethylene at high temperature in combination with ethylaluminum sesquichloride (Et3Al2Cl3, EASC) as co-catalyst. The polyethylene obtained by these catalysts is linear, crystalline and displays narrow dispersity. The unique low molecular weight PE formed in this reaction exhibits properties comparable to commercial micronized PE waxes that have potential industrial applications in surface coating and ink formulations. Copyright © 2013 John …
Testing Soil Encasing Materials for Measuring Hydraulic Conductivity of a Sandy-Loam Soil by the Cube Methods
2008
The Cube Method (CM) and the Modified Cube Method (MCM) were developed for measuring vertical (K v ) and horizontal (K h ) saturated hydraulic conductivity of a single soil sample. By these methods, a cube of soil is carved out in situ and a suitable material is applied to enclose the cube in a tightly fitting casing before moving the sample to the laboratory. Problems may be associated with the use of gypsum, originally used to encase soil. The suitability of molten wax and expandable polyurethane foam to encase a soil cube was tested for a sandy-loam soil. Wax-treated samples yielded lower conductivity results than untreated samples by a maximum factor of 3.7. The observed discrepancies w…
Hydroxypropyl Cellulose Films Filled with Halloysite Nanotubes/Wax Hybrid Microspheres
2021
The design of novel nanocomposite films based on hydroxypropyl cellulose (HPC) and wax/halloysite hybrid microspheres has been reported. In particular, we first prepared wax/clay Pickering emulsions which were characterized by thermogravimetric analysis and microscopy. SEM images allowed more detailed insights on the nanotubes disposition at the wax/water interface, acting as an outer stabilizing shell. Therefore, the cellulosic biopolymer was added, and it was found that HPC enhances the colloidal stability of the particles, preventing their coalescence and sedimentation. The preparation of the composite films was carried out by the solvent casting method, which enabled the development of …
Halloysite nanotubes-based nanocomposites for the hydrophobization of hydraulic mortar
2021
Abstract The treatment of stone surfaces for their protection from ageing caused by natural and anthropogenic effects is an open issue in materials development for Cultural Heritage. We thought interesting to verify the suitability of a modified cellulose biofilm filled with halloysite nanotubes as wax compatibilizers to design a protecting layer. A hydraulic mortar was selected as a stone prototype. To improve the physico-chemical properties of the covering layer, wax microparticles have been incorporated to control transport, consolidation and wettability features. In particular, different application protocols have been studied, namely brushing and spraying, to assess whether the propos…
Chemical and physical modification of hemp fibres by steam explosion technology
2013
In current research attempt has been made to analyse hemp fibres treated with steam explosion (SE) technology. Disintegration of hemp fibres separated from non-retted, dew-retted and dried stems of hemp ('Purini')[1] by alkali treatment and steam explosion (SE) were investigated. An average intensive SE in combination with the hydro-thermal and alkali after-treatment allows decreasing the diameter of hemp fibres and reduce the concentration of non-celluloses components, among them hemicelluloses, lignin, pectin, waxes and water [1;2].
Effect of different dispersing additives on the morphology and the properties of polyethylene-based nanocomposite films
2011
In this work, the use of a polar wax, e.g. amphiphilic Tegomer ® E 525 (TEG) is investigated with the aim of mod- ifying, and possibly improving, the dispersion of an organically modified nanoclay (OMMT), loaded at 5 wt%, in a poly- ethylene matrix (PE) at relatively low loading levels. We have indeed found that the incorporation of low loadings, e.g. 0.5 wt%, of TEG, an amphiphilic block co-polymer, into a PE/OMMT sample results in a substantial improvement of the clay dispersion in the nanocomposite and, consequently, of the mechanical and thermomechanical properties of the films. The achieved results are comparable to those obtained for systems containing traditional dispersing agents su…
Chemical composition of the essential oil of Phagnalon saxatile (L.) Cass. (Asteraceae) growing wild in Southern Italy
2005
Abstract The essential oil from aerial parts of Phagnalon saxatile (L.) Cass. (Asteraceae) was obtained by hydrodistillation. The oil content was 0.15% (v/w), on a dry weight basis. The oil composition was analyzed by GC and GC/MS. Altogether 66 compounds were identified accounting for 93.2% of the oil. Sesquiterpenes represent the 23.9% of the oil. In the oil were also present fatty acids (21.8%) and waxes (19.3%). The oil shows no antibacterial activity.
Epicuticular changes and storage potential of cactus pear [Opuntia ficus-indica Miller (L.)] fruit following gibberellic acid preharvest sprays and p…
1999
Abstract Cactus pear [Opuntia ficus-indica Mill. (L.) cv. Gialla] fruit were treated 10 weeks after the second induced-bloom flush with 10 ppm gibberellic acid (GA3) or were heated at 37°C for 30 h under saturated humidity after harvest. The two treatments were also combined before storage at 6°C for 45 days plus 4 additional days at 20°C to simulate a marketing period (SMP). Fruit not treated with GA3 and unheated were used as controls. GA3 spray delayed fruit ripening as evaluated by peel colour change and scanning electron microscopic observations of epicuticular wax morphology, decreased ethanol levels in the flesh during storage and SMP, and reduced decay development during storage. Po…