Search results for "Wetting"

showing 10 items of 235 documents

Hydrological effects of a layer of vegetation ash on underlying wettable and water repellent soil

2012

Abstract Hydrological processes after a wildfire may take place under soil conditions altered by heat and by the presence of ash. Soil and ash interact as a two-layer system with poorly understood hydrological properties, especially when ash covers water repellent soil. Here we quantify the effect of an ash layer (0, 5, 15 and 30 mm depth) covering wettable and water repellent soil on (i) the hydrological response and the mechanism of runoff generation and (ii) the water repellency dynamics, for a rainfall event followed by different drying periods and a second rainfall event. Laboratory rainfall simulation experiments (82.5 mm h − 1 during 40 min) at small plot-scale (0.09 m 2 ) were perfo…

HydrologySplashSoil waterSoil ScienceEnvironmental scienceSoil scienceVegetationWettingSurface runoffSubsurface flowWater contentLayer (electronics)
researchProduct

One-Dimensional Transient Analysis of Rainfall Infiltration in Unsaturated Volcanic Ash

2015

The paper presents a one-dimensional hydro-mechanical analysis of rainfall infiltration in a loose volcanic ash and the utilisation of a factor of safety for the implementation of an early-warning system. Three different rainy seasons with different rainfall patterns were analysed . The analysis aims to understand the influence of the antecedent rainfall on the wetting front, the pore-water pressures and the factor of safety. The analysis was carried out in the context of a Master project of the first author at the Laboratory for Soil Mechanics of EPFL.

HydrologyUnsaturatedContext (language use)Wetting frontTransient analysisRainfall infiltrationrainfall-induced landslideunsaturated volcanic ashFactor of safetyground water seepageVolcanic AshGeologySoil mechanicsinfinity slope analysisVolcanic ashGroundwater seepage
researchProduct

The effect of patchy distribution ofStipa tenacissimaL. on runoff and erosion

1997

In south-east Spain, a semi-arid area,Stipa tenacissima(alphagrass) covers large natural and semi-natural areas with a mosaic of tussocks and bare zones. However, little knowledge exists about the influence of these patterns on runoff and erosion. In order to understand the hydrological and erosional behaviour of the vegetated (herbs andalphagrass) and bare zones, rainfall simulation experiments were carried out at three sites in south-east Spain. The experiments showed that surface runoff and erosion is negligible in the tussock and quite high in the bare areas. High infiltration rates and deep wetting fronts were measured in the vegetated patches, and lower infiltration rates and shallowe…

Hydrologygeographygeography.geographical_feature_categoryEcologyved/biologyTussockved/biology.organism_classification_rank.speciesSpatial distributionInfiltration (HVAC)Sink (geography)ErosionEnvironmental scienceWettingSurface runoffEcology Evolution Behavior and SystematicsEarth-Surface ProcessesStipa tenacissimaJournal of Arid Environments
researchProduct

Estimación mediante programación genética de los patrones del suelo humectantes para el riego por goteo

2012

Drip irrigation is considered as one of the most efficient irrigation systems. Knowledge of the soil wetted perimeter arising from infiltration of water from drippers is important in the design and management of efficient irrigation systems. To this aim, numerical models can represent a powerful tool to analyze the evolution of the wetting pattern during irrigation, in order to explore drip irrigation management strategies, to set up the duration of irrigation, and finally to optimize water use efficiency. This paper examines the potential of genetic programming (GP) in simulating wetting patterns of drip irrigation. First by considering 12 different soil textures of USDA–SCS soil texture t…

Hydrologysoil texture triangleIrrigationHydrusnumerical modelsinfiltraciónSoil textureHYDRUS 2Dmodelos numéricosDrip irrigationinfiltrationtriángulo de texturas del suelosoil texture triangle.Wetted perimeterInfiltration (hydrology)LoamSettore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-Forestaligenetic programmingprogramación genéticaWettingnumerical modelAgronomy and Crop ScienceMathematics
researchProduct

A comparison between the single ring pressure infiltrometer and simplified falling head techniques

2013

Testing the relative performances of the single ring pressure infiltrometer (PI) and simplified falling head (SFH) techniques to determine the field saturated soil hydraulic conductivity, Kfs, at the near point scale may help to better establish the usability of these techniques for interpreting and simulating hydrological processes. A sampling of 10 Sicilian sites showed that the measured Kfs was generally higher with the SFH technique than the PI one, with statistically significant differences by a factor varying from 3 to 192, depending on the site. A short experiment with the SFH technique yielded higher Kfs values because a longer experiment with the PI probably promoted short-term swe…

Infiltration (hydrology)Soil structureHydraulic conductivitySoil waterEnvironmental scienceGeotechnical engineeringInfiltrometerSoil scienceWettingPorous mediumSurface runoffWater Science and TechnologyHydrological Processes
researchProduct

Enhanced light scattering in Si nanostructures produced by pulsed laser irradiation

2013

An innovative method for Si nanostructures (NS) fabrication is proposed, through nanosecond laser irradiation (lambda = 532 nm) of thin Si film (120 nm) on quartz. Varying the laser energy fluences (425-1130 mJ/cm(2)) distinct morphologies of Si NS appear, going from interconnected structures to isolated clusters. Film breaking occurs through a laser-induced dewetting process. Raman scattering is enhanced in all the obtained Si NS, with the largest enhancement in interconnected Si structures, pointing out an increased trapping of light due to multiple scattering. The reported method is fast, scalable and cheap, and can be applied for light management in photovoltaics. (C) 2013 AIP Publishin…

Innovative methodMaterials sciencePhysics and Astronomy (miscellaneous)Settore ING-INF/01 - ElettronicaLight scatteringQuartz SiliconSettore FIS/03 - Fisica Della Materialaw.inventionsymbols.namesakeLight managementSi nanostructures NanostructurelawDewetting proceLaser energieDewettingThin filmbusiness.industryScatteringIsolated clusterLaserInterconnected structureSemiconductorsymbolsOptoelectronicsbusinessRaman spectroscopyPhotovoltaicRaman scattering
researchProduct

Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC Technical Report)

2011

This document deals with the characterization of porous materials having pore widths in the macropore range of 50 nm to 500 μm. In recent years, the development of advanced adsorbents and catalysts (e.g., monoliths having hierarchical pore networks) has brought about a renewed interest in macropore structures. Mercury intrusion–extrusion porosimetry is a well-established method, which is at present the most widely used for determining the macropore size distribution. However, because of the reservations raised by the use of mercury, it is now evident that the principles involved in the application of mercury porosimetry require reappraisal and that alternative methods are worth being listed…

IntrusionMacroporeChemical engineeringCapillary condensationChemistryGeneral Chemical EngineeringChemical nomenclaturechemistry.chemical_elementGeneral ChemistryPorosimetryWettingPorous mediumMercury (element)Pure and Applied Chemistry
researchProduct

Fabric evolution and the related swelling behaviour of a sand/bentonite mixture upon hydro-chemo-mechanical loadings

2015

This experimental study investigates the swelling behaviour of an 80/20 sand/bentonite mixture and the associated fabric evolution under different hydro-chemo-mechanical loadings. Free and confined swelling tests are performed on specimens compacted to different dry densities and wetted with different pore fluids. Controlled suction confined swelling tests are performed to determine the suction–swelling pressure relationship for two different densities. An extensive microstructural characterisation is performed to relate the observed swelling behaviour to the evolution of the different pore networks during wetting. Based on the microstructural analysis, an expression is proposed to determi…

Laboratory testMaterials scienceSuction010504 meteorology & atmospheric sciencesExpansive clay0211 other engineering and technologiesMixing (process engineering)02 engineering and technologylaboratory testsFabric/structure of soil01 natural sciencesPartial saturationswellingmedicineEarth and Planetary Sciences (miscellaneous)Geotechnical engineeringComposite material021101 geological & geomatics engineering0105 earth and related environmental sciencessand/bentonite mixturesChemo mechanicalExpansive soilexpansive soilsGeotechnical Engineering and Engineering Geologyfabric evolutionBentonitefabric/structure of soilsWettingHCM loadingsSwellingmedicine.symptomDry densitypore water chemistry
researchProduct

Molecular adhesion interactions between Langmuir monolayers and solid substrates

1998

Abstract Substrate-monolayer adhesion interactions between differently prepared SiO2 surfaces and Langmuir monolayers were investigated. From the relation between the contact angle and the surface tension of a Langmuir monolayer in the configuration of Langmuir wetting the work of adhesion between the substrate and the monolayer as a function of the molecular packing and the transfer ratios was determined. Thus the molecular work of adhesion of different SiO2-dimyristoylphosphatidylethanolamine surfaces was quantified. The relation between the local adhesion interactions and the molecular packing and structure is presented and substrate-induced phase transitions are discussed.

LangmuirChemistrytechnology industry and agricultureDispersive adhesionAdhesionLangmuir–Blodgett filmContact angleSurface tensionColloid and Surface ChemistryChemical engineeringMonolayerOrganic chemistrylipids (amino acids peptides and proteins)WettingColloids and Surfaces A: Physicochemical and Engineering Aspects
researchProduct

Physisorption Instabilities during Dynamic Langmuir Wetting

1994

Continuous dynamic Langmuir wetting of lipid monolayers can create regular stripe patterns on the solid substrate surface. Monolayers doped with minor amounts of fluorescence dye may be deposited in stripes of alternating high and low dye concentration. In case of pure monolayers stripes are observed with AFM. The striations run normal to the dipping direction and have widths of typically several micrometres and distances varying from 1 to ≈ 100 μm. The stripe widths, distances, and fluorescence contrast depend on deposition speed, surface pressure, substrate surface preparation, and dye concentration. The patterns probably result from physisorption (meniscus) instabilities caused by a feed…

LangmuirMaterials sciencebusiness.industryfood and beveragesGeneral Physics and AstronomySubstrate (electronics)Surface pressureContact angleOpticsPhysisorptionChemical physicsMonolayerMeniscusWettingbusinessEurophysics Letters (EPL)
researchProduct