Search results for "ZINC"

Laser irradiation of ZnO:Al/Ag/ZnO:Al multilayers for electrical isolation in thin film photovoltaics

2013

Laser irradiation of ZnO:Al/Ag/ZnO:Al transparent contacts is investigated for segmentation purposes. The quality of the irradiated areas has been experimentally evaluated by separation resistance measurements, and the results are complemented with a thermal model used for numerical simulations of the laser process. The presence of the Ag interlayer plays two key effects on the laser scribing process by increasing the maximum temperature reached in the structure and accelerating the cool down process. These evidences can promote the use of ultra-thin ZnO:Al/ Ag/ZnO:Al electrode in large-area products, such as for solar modules. © 2013 Crupi et al.; licensee Springer.

Regenerable ZnO/GaAs Bulk Acoustic Wave Biosensor for Detection of Escherichia coli in “Complex” Biological Medium

2021

A regenerable bulk acoustic wave (BAW) biosensor is developed for the rapid, label-free and selective detection of Escherichia coli in liquid media. The geometry of the biosensor consists of a GaAs membrane coated with a thin film of piezoelectric ZnO on its top surface. A pair of electrodes deposited on the ZnO film allows the generation of BAWs by lateral field excitation. The back surface of the membrane is functionalized with alkanethiol self-assembled monolayers and antibodies against E. coli. The antibody immobilization was investigated as a function of the concentration of antibody suspensions, their pH and incubation time, designed to optimize the immunocapture of bacteria. The perf…

Comparison of two portable solid state detectors with an improved collimation and alignment device for mammographic x-ray spectroscopy

2006

We describe a portable system for mammographic x-ray spectroscopy, based on a 2 X 2 X 1 mm3 cadmium telluride (CdTe) solid state detector, that is greatly improved over a similar system based on a 3 X 3 X 2 mm3 cadmium zinc telluride (CZT) solid state detector evaluated in an earlier work. The CdTe system utilized new pinhole collimators and an alignment device that facilitated measurement of mammographic x-ray spectra. Mammographic x-ray spectra acquired by each system were comparable. Half value layer measurements obtained using an ion chamber agreed closely with those derived from the x-ray spectra measured by either detector. The faster electronics and other features of the CdTe detecto…

Numerical Study of Zinc Coated Car Body Laser Welding

2001

Antibacterial and barrier properties of oriented polymer films with ZnO thin films applied with atomic layer deposition at low temperatures

2014

Abstract Concerns on food safety, and need for high quality and extended shelf-life of packaged foods have promoted the development of antibacterial barrier packaging materials. Few articles have been available dealing with the barrier or antimicrobial properties of zinc oxide thin films deposited at low temperature with atomic layer deposition (ALD) onto commercial polymer films typically used for packaging purposes. The purpose of this paper was to study the properties of ZnO thin films compared to those of aluminum oxide. It was also possible to deposit ZnO thin films onto oriented polylactic acid and polypropylene films at relatively low temperatures using ozone instead of water as an o…

Inkjet Printable ZnO/PEDOT:PSS Heterojunction for Thin Flexible Semi-Transparent Optoelectronic Sensors

2020

International audience; Flexible sensors play an increasing role in printed electronics and are of interest for optoelectronic applications in flexible robotics and industrial automation. Thus, we have investigated the hybrid inorganic-organic junction between ZnO and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate). A thin ITO (indium tin oxide) layer on PET (polyethylene terephthalate) foils was used as substrate electrode. ZnO was deposited from a nanoparticle (NP) suspension by electrophoretic deposition. For comparison, we have used three different methods for the deposition of PEDOT:PSS, namely (i) drop casting, (ii) dip-coating, (iii) inkjet printing. For the result…

Nucleation and growth of ZnO on PMMA by low-temperature atomic layer deposition

2015

ZnO films were grown by atomic layer deposition at 35 °C on poly(methyl methacrylate) substrates using diethylzinc and water precursors. The film growth, morphology, and crystallinity were studied using Rutherford backscattering spectrometry, time-of-flight elastic recoil detection analysis, atomic force microscopy, scanning electron microscopy, and x-ray diffraction. The uniform film growth was reached after several hundreds of deposition cycles, preceded by the precursor penetration into the porous bulk and island-type growth. After the full surface coverage, the ZnO films were stoichiometric, and consisted of large grains (diameter 30 nm) with a film surface roughness up to 6 nm (RMS). T…

Colloidal lithography and Metal-Organic Chemical Vapor Deposition process integration to fabricate ZnO nanohole arrays

2010

A complete set up of optimal process conditions for an effective colloidal lithography/catalyst assisted MOCVD process integration is presented. It mainly focuses on the determination of the deposition temperature threshold for ZnO Metal-Organic Chemical Vapour Deposition (MOCVD) as well as the concentration of metal-organic silver (Ag) catalyst. Indeed, the optimization of such process parameters allows to tailor the ZnO film morphology in order to make the colloidal lithography/catalyst assisted MOCVD approach a valuable bottom up method to fabricate bi-dimensional ordered ZnO nanohole arrays. (C) 2010 Elsevier B.V. All rights reserved.

Bioaccessibility of minerals in school meals: Comparison between dialysis and solubility methods

2005

Abstract Determinations have been made of content and bioaccessibility of Ca, Fe, Zn and Cu in 13 dishes collected from a catering service delivering to a school. Bioaccessibility was estimated by measuring the soluble or dialyzable mineral fraction resulting from in vitro gastrointestinal digestion of the meal. The analyzed dishes had mineral contents (μg/g) in the following ranges: Ca (74.1–913), Fe (2.8–17.9), Zn (2.8–13.1), Cu (0.28–1.90). Mineral solubility and dialysis percentages were as follows: Ca (1.7–96.2; 0.75–61.3), Fe (16.0–97.8; 0.23–19.0), Zn (22.6–93; 5.78–31.45), Cu (35.7–92.3; 0.66–25.0). The highest bioaccessible Ca content corresponded to fish-based dishes, while vegeta…

Exploring Zinc Apatites through Different Synthesis Routes

2013

nclusion of zinc in apatites is not completely understood due to complexes in solution preventing the incorporation or the inclusion of defects. Some work has shown zinc addition by alternative synthesis routes, but the level of incorporation has not been reassessed. This work uses a newly developed approach whereby zinc is included in an amorphous phase and subsequently crystallized. Different phosphate reactants (ammonium, sodium or potassium phosphates) were mixed together with calcium salts (calcium nitrate or calcium acetate) and the pH level adjusted (with ammonia or KOH) to investigate the ease of forming an amorphous phase and the inclusion of zinc. X-ray diffraction revealed that a…