Search results for "absorption."
showing 10 items of 2682 documents
Impact of optical and structural aging in As_2S_3 microstructured optical fibers on mid-infrared supercontinuum generation
2014
We analyze optical and structural aging in As2S3 microstructured optical fibers (MOFs) that may have an impact on mid-infrared supercontinuum generation. A strong alteration of optical transparency at the fundamental OH absorption peak is measured for high-purity As2S3 MOF stored in atmospheric conditions. The surface evolution and inherent deviation of corresponding chemical composition confirm that the optical and chemical properties of MOFs degrade upon exposure to ambient conditions because of counteractive surface process. This phenomenon substantially reduces the optical quality of the MOFs and therefore restrains the spectral expansion of generated supercontinuum. This aging process …
Evolution of Photo-induced defects in Ge-doped fiber/preform: influence of the drawing
2011
International audience; We have studied the generation mechanisms of two different radiation-induced point defects, the Ge(1) and Ge(2) centers, in a germanosilicate fiber and in its original preform. The samples have been investigated before and after X-ray irradiation using the confocal microscopy luminescence and the electron paramagnetic resonance techniques. Our experimental results show the higher radiation sensitivity of the fiber as compared to the perform and suggest a relation between Ge(1) and Ge(2) generation. To explain our data we have used different models, finding that the destruction probability of the Ge(1) and Ge(2) defects is larger in fiber than in preform, whereas the …
Ultraviolet-visible light-induced solarisation in silica-based optical fibres for indoor solar applications
2021
Abstract The transmission performances of pure- and doped-silica (a-SiO2) optical fibres are compared during the exposure to a high-power broadband light source approximating the solar spectrum. From the Gaussian decomposition of the attenuation spectra, we found that Al- and P-doped fibres show a fast solarisation effect which leads to transmission degradation in the ultraviolet-visible range. Similarly, Ge-doped fibres undergo photoinduced colour-centre formation which, however, does not prevent visible-light propagation. One of the two tested pure-silica fibres results completely unaffected by light exposure whereas the other shows an absorption band probably due to the presence of chlor…
Infrared monitoring of underground CO2 storage using chalcogenide glass fibers
2009
International audience; An optical-fiber-based system suitable for monitoring the presence of carbon dioxide, so-called "greenhouse gas", is investigated. Since each pollutant gas shows a characteristic optical absorption spectrum in the mid-infrared (mid-IR), it is possible to detect selectively and quantitatively the presence of gases in a given environment by analysing mid-IR spectra. The main infrared signature of carbon dioxide gas is a double absorption peak located at 4.2 μm. Chalcogenide optical fibers, which can transmit light in the 1-6 μm range, are well-adapted for CO2 analysis. In this wavelength range, they show attenuation losses that compare favourably with other types of fi…
Excited-state absorption in erbium-doped silica fiber with simultaneous excitation at 977 and 1531 nm
2009
We report a study of the excited-state absorption (ESA) in erbium-doped silica fiber (EDF) pumped at 977 nm, when the fiber is simultaneously excited by signal radiation at 1531 nm. We show, both experimentally and theoretically, that ESA efficiency at 977 nm gets strongly enhanced only in the presence of signal power. Experimentally, this conclusion is supported through the detection of upconversion emission, a “fingerprint” of the ESA process, and through the measurements of the EDF nonlinear transmission coefficient for the pump wavelength, which is sensitive to the ESA value. It is shown that the experimental data are precisely modeled with an advanced five-level Er3+ model developed fo…
Absorption Properties of Metal–Semiconductor Hybrid Nanoparticles
2011
The optical response of hybrid metal-semiconductor nanoparticles exhibits different behaviors due to the proximity between the disparate materials. For some hybrid systems, such as CdS-Au matchstick-shaped hybrids, the particles essentially retain the optical properties of their original components, with minor changes. Other systems, such as CdSe-Au dumbbell-shaped nanoparticles, exhibit significant change in the optical properties due to strong coupling between the two materials. Here, we study the absorption of these hybrids by comparing experimental results with simulations using the discrete dipole approximation method (DDA) employing dielectric functions of the bare components as input…
Simultaneous imaging of absorption and scattering in dc diffuse optical tomography
2009
We present new results on the fundamental nonuniqueness issue in dc diffuse optical tomography (DOT) that resolve a long-standing conflict between theory and practice. Theoretically, scattering and absorption properties of the imaged media were proven to produce equivalent and thus indistinguishable effects. However, successful simultaneous reconstructions of both parameters were obtained in phantom experiments.
Effects of spatial dispersion and damping on exciton absorption
1986
Exciton absorption is studied in the spatially dispersive case. The energy-propagation properties of the medium are used to define the absorption coefficient. The interplay of dispersion and damping in determining the absorption coefficient is discussed and a critical value of the damping above which the dispersion effects disappear is derived analytically. Furthermore, the dependence of the spectral and of the integrated absorption coefficient on the auxiliary boundary condition is discussed.
High Tolerance of Double-Decker Phthalocyanine toward Molecular Oxygen
2018
Because organic electronics suffer from degradation-inducing oxidation processes, oxygen-tolerant organic molecules could solve this issue and be integrated to improve the stability of devices during operation. In this work, we investigate how lutetium double-decker phthalocyanine (LuPc2) reacts toward molecular oxygen and we report microscopic details of its interaction with LuPc2 film by combining X-ray photoemission spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and density functional theory. Surprisingly, LuPc2 molecules are found to weakly physisorb below 120 K and appear rather inert to molecular oxygen at more elevated temperatures. We are able to draw a micros…
Structural, electronic, and electrical properties of an Undoped n-Type CdO thin film with high electron concentration
2014
Transparent conducting metal oxides (TCOs) combine the properties of optical transparency in the visible region with a high electrical conductivity. They are a critical component as the window electrode in liquid crystal and electroluminescent display devices, as well as in many designs of solar cells now under development. Sn-doped In2O3 is currently the most important TCO, but it suffers from some drawbacks. These include the high cost of indium, weak optical absorption in the blue-green region, as well as chemical instability that leads to corrosion phenomena in organic light-emitting devices. Indium tin oxide (ITO) films are also brittle and of relatively low durability. A number of oth…