Search results for "accelerator"
showing 10 items of 1507 documents
First laser cooling of relativistic ions in a storage ring
1990
The first successful laser cooling of ions at relativistic energies was observed at the Heidelberg TSR storage ring. A $^{7}\mathrm{Li}^{+}$-ion beam of 13.3 MeV was oberlapped with resonant copropagating and counterpropagating laser beams. The metastable ions were cooled from 260 K to a longitudinal temperature of below 3 K and decelerated by several keV. The longitudinal velocity distribution was determined by a fluorescence method. After laser cooling a strongly enhanced narrow peak appeared in the Schottky noise spectrum in addition to the uncooled ion distribution.
The electron cyclotron resonance ion source with arc-shaped coils concept
2012
The main limitation to further improve the performance of ECR ion sources is set by the magnet technology related to the multipole magnet field used for the closed minimum-B structure. The JYFL ion source group has sought different approaches to improve the strength of the minimum-B structure required for the production of highly charged ion beams. It was found out that such a configuration can be realized with arc shaped coils. The first prototype, electron cyclotron resonance ion source with arc-shaped coils (ARC-ECRIS), was constructed and tested at JYFL in 2006. It was confirmed that such an ion source can be used for the production of highly charged ion beams. Regardless of several cos…
The laser ion source trap for highest isobaric selectivity in online exotic isotope production
2010
The improvement in the performance of a conventional laser ion source in the laser ion source and trap (LIST) project is presented, which envisages installation of a repeller electrode and a linear Paul trap/ion guide structure. This approach promises highest isobaric purity and optimum temporal and spatial control of the radioactive ion beam produced at an online isotope separator facility. The functionality of the LIST was explored at the offline test separators of University of Mainz (UMz) and ISOLDE/CERN, using the UMz solid state laser system. Ionization efficiency and selectivity as well as time structure and transversal emittance of the produced ion beam was determined. Next step aft…
Production of zero energy radioactive beams through extraction across superfluid helium surface
2003
A radioactive Ra-223 source was immersed in superfluid helium at 1.2-1.7 K. Electric fields transported recoiled Rn-219 ions in the form of snowballs to the surface and further extracted them across the surface. The ions were focussed onto an aluminium foil and alpha particle spectra were taken with a surface barrier spectrometer. This enabled us to determine the efficiency for each process unambiguously. The pulsed second sound wave proved effective in enhancing the extraction of positive ions from the surface. Thus we offer a novel method for study of impurities in superfluid helium and propose this method for production of zero energy nuclear beams for use at radioactive ion beam facilit…
Programmable proximity aperture lithography with MeV ion beams
2008
A novel MeV ion beam programmable proximity aperture lithography system has been constructed at the Accelerator Laboratory of the University of Jyvaskyla, Finland. This facility can be used to fabricate three dimensional microstructures in thick (<100μm) polymer resist such as polymethylmethacrylate. In this method, MeV ion beams from the 1.7 MV pelletron and K130 cyclotron accelerators are collimated to a beam spot of rectangular shape. This shape is defined by a computer-controlled aperture made of a pair of L-shaped Ta blades which are in close proximity to the sample to minimize the penumbra broadening. Here the authors report on development of the system, the controlling software, the …
The effect of rf pulse pattern on bremsstrahlung and ion current time evolution of an ECRIS.
2010
Time-resolved helium ion production and bremsstrahlung emission from JYFL 14 GHz ECRIS is presented with different radio frequency pulse lengths. rf on times are varied from 5 to 50 ms and rf off times from 10 to 1000 ms between different measurement sets. It is observed that the plasma breakdown occurs a few milliseconds after launching the rf power into the plasma chamber, and in the beginning of the rf pulses a preglow transient is seen. During this transient the ion beam currents are increased by several factors compared to a steady state situation. By adjusting the rf pulse separation the maximum ion beam currents can be maintained during the so-called preglow regime while the amount o…
The effect of microwave power on the Ar9+ and Ar13+ optical emission intensities and ion beam currents in ECRIS
2018
The production of Ar9+ and Ar13+ ions in an ECRIS plasma and the efficiency of the ion beam extraction and transport of the resulting Ar9+ and Ar13+ ion beams have been studied with the JYFL 14 GHz ECRIS by using optical emission spectroscopy and measurement of the m/q analyzed beam currents. The relative changes in both the optical emission and the ion beam current in CW mode as function of microwave power and in amplitude modulation (AM) operation mode are reported. The results indicate a discrepancy between the parametric dependence of high charge state ion densities in the core plasma and their extracted beam currents. The observation implies that in CW mode the ion currents could be li…
Simulation of H- ion source extraction systems for the Spallation Neutron Source with Ion Beam Simulator.
2012
A three-dimensional ion optical code IBSimu, which is being developed at the University of Jyväskylä, features positive and negative ion plasma extraction models and self-consistent space charge calculation. The code has been utilized for modeling the existing extraction system of the H(-) ion source of the Spallation Neutron Source. Simulation results are in good agreement with experimental data. A high-current extraction system with downstream electron dumping at intermediate energy has been designed. According to the simulations it provides lower emittance compared to the baseline system at H(-) currents exceeding 40 mA. A magnetic low energy beam transport section consisting of two sole…
Advanced time-stamped total data acquisition control front-end for MeV ion beam microscopy and proton beam writing
2013
Many ion-matter interactions exhibit [email protected] time dependences such as, fluorophore emission quenching and ion beam induced charge (IBIC). Conventional event-mode MeV ion microbeam data acquisition systems discard the time information. Here we describe a fast time-stamping data acquisition front-end based on the concurrent processing capabilities of a Field Programmable Gate Array (FPGA). The system is intended for MeV ion microscopy and MeV ion beam lithography. The speed of the system (>240,000 events s^-^1 for four analogue to digital converters (ADC)) is limited by the ADC throughput and data handling speed of the host computer.
The CERN/ISOLDE Laser Ion Source
2017
Laser resonance photo-ionization an essential aspect of radioactive ion beam production for fundamental and applied physics research. The laser ion source of the ISOLDE facility, described here, is the most versatile of its type worldwide.