Search results for "activated carbon"

showing 10 items of 70 documents

Biotrickling Filters for Removal of Volatile Organic Compounds from Air in the Coating Sector

2013

chemistry.chemical_compoundMaterials scienceCoatingchemistryengineeringmedicineAcetoneOrganic chemistryengineering.materialButyl acetateNaphthaActivated carbonmedicine.drug
researchProduct

Activated carbon from hydrolysis lignin: Effect of activation method on carbon properties

2022

This study presents the effects of different activation methods to produce activated carbon from the hydrolysis lignin. Pretreatment of the feedstock with common mineral acids (HCL, HNO3, and H3PO4), different steam rates for physical activation, and different chemical activating agents (ZnCl2, Na2CO3, and KOH) for chemical activation were investigated. The pretreated biomass was carbonized and activated in one-stage process and the surface characteristics, such as total pore volume, pore size distribution and specific surface area, were investigated. The results showed that the activated carbon surface properties were not greatly affected by acid pretreatment. Brunauer-Emmett-Teller (BET) …

hydrolyysiRenewable Energy Sustainability and the EnvironmentligniiniForestrysurface areaphysical activationesikäsittelyhuokoisuusacid pretreatmentaktiivihiilihydrolysis ligninactivated carbonbiomassa (teollisuus)Waste Management and DisposalAgronomy and Crop ScienceBiomass and Bioenergy
researchProduct

Characterization of Cobalt Catalysts on Biomass-Derived Carbon Supports

2017

Cobalt catalysts are known to have a high activity and selectivity in the Fischer–Tropsch reaction converting synthesis gas to higher hydrocarbons (C5+). These catalysts have been supported by different porous materials. Porous carbon materials like activated carbon (AC) have physical and chemical surface properties that affect the preparation of supported metal catalysts and can easily be tailored. In this study, AC was produced by carbonization and steam activation of lignin, a waste fraction from the Kraft pulping process. A series of Co/AC-catalysts was produced and characterized by several techniques. According to the results, tailored properties (high surface area, mesoporosity) were …

inorganic chemicalsActivated carbonaktiivihiilicharacterizationCobaltSupportkobolttikannatuscatalyst
researchProduct

Lignin-based activated carbon-supported metal oxide catalysts in lactic acid production from glucose

2021

Abstract In this study, heterogeneous biomass-based activated carbon-supported metal oxide catalysts were prepared and tested for lactic acid production from glucose in aqueous solution. Activated carbons were produced from hydrolysis lignin by chemical (ZnCl2) or steam activation and modified with a nitric acid treatment and Sn, Al, and Cr chlorides to obtain carbon-based metal oxide catalysts. The modification of the carbon support by nitric acid treatment together with Sn and Al oxides led to an increase in lactic acid yield. The highest lactic acid yield (42 %) was obtained after 20 min at 180 °C with the Sn/Al (5/2.5 wt.%) catalyst on steam-activated carbon treated by nitric acid. Reus…

inorganic chemicalsChemistryProcess Chemistry and TechnologyOxidefood and beverageschemistry.chemical_elementcomplex mixturesCatalysisLactic acidCatalysischemistry.chemical_compoundHydrolysisLeaching (chemistry)Nitric acidmedicineCarbonNuclear chemistryActivated carbonmedicine.drugApplied Catalysis A: General
researchProduct

Lignin-based activated carbon-supported metal oxide catalysts in lactic acid production from glucose

2021

In this study, heterogeneous biomass-based activated carbon-supported metal oxide catalysts were prepared and tested for lactic acid production from glucose in aqueous solution. Activated carbons were produced from hydrolysis lignin by chemical (ZnCl2) or steam activation and modified with a nitric acid treatment and Sn, Al, and Cr chlorides to obtain carbon-based metal oxide catalysts. The modification of the carbon support by nitric acid treatment together with Sn and Al oxides led to an increase in lactic acid yield. The highest lactic acid yield (42%) was obtained after 20 minutes at 180 °C with the Sn/Al (5/2.5 wt.%) catalyst on steam-activated carbon treated by nitric acid. Reusabilit…

inorganic chemicalsmaitohappobiomasskemialliset reaktiotheterogeneous catalystlactic acidfood and beveragesmetal oxidecomplex mixturesglukoosikatalyytitkatalyysiaktiivihiilioksiditkemian tekniikkaactivated carbonbiomassa (teollisuus)aqueous solutionmuuntaminen
researchProduct

Production of ethyl lactate by activated carbon-supported Sn and Zn oxide catalysts utilizing lignocellulosic side streams

2021

In this study, activated carbon-supported Sn and Zn oxide catalysts were prepared from hydrolysis lignin and used for the conversion of model solutions of trioses, hexoses, and lignocellulosic biomass hydrolysates to ethyl lactate. Both catalysts, SnO2@AC and ZnO@AC, were able to produce ethyl lactate in high yields. SnO2@AC was a more active and selective catalyst in triose (dihydroxyacetone) conversion, providing 99% yield to ethyl lactate. ZnO@AC, by contrast, was more selective in glucose and hydrolysate conversion, with a yield of 60% and 85%, respectively. The ethyl lactate yields were significantly higher than those from the optimized model solution experiments when using ZnO@AC cata…

katalyytitsinkkioksidikatalyysiaktiivihiilioksiditkemian tekniikkaheterogeneous catalystactivated carbonbiomassa (teollisuus)metal oxideethyl lactatelaktaatitlignocellulosic biomass
researchProduct

Influence of activated carbon in the TiO2 mediated photo-assisted degradation of 2-propanol in gas-solid regime

2009

photocatalysititanium dioxideActivated carbon2-propanolSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie
researchProduct

Comparison of the Properties of Activated Carbons Produced in One-Stage and Two-Stage Processes

2018

Activated carbons (ACs) can be produced from biomass in a thermal process either in a direct carbonization-activation process or by first carbonizing the biomass and later activating the bio-chars into activated carbons. The properties of the ACs are dependent on the type of process used for production. In this study, the properties of activated carbons produced in one-stage and two-stage processes are considered. Activated carbons were produced by physical activation of two types of starting materials: bio chars produced from spruce and birch chips in a commercial carbonization plant and from the corresponding raw chips. The activated carbons produced were characterized regarding specific …

porosity020209 energychemistry.chemical_elementBiomass02 engineering and technologyThermal treatment010501 environmental sciencesphysical activation01 natural sciencesspecific surface areaslcsh:QD241-441huokoisuuslcsh:Organic chemistryspecific surface areasBiochar0202 electrical engineering electronic engineering information engineeringmedicineactivated carbonbiomassa (teollisuus)Porosityta1160105 earth and related environmental sciencesbio-charbiomassCarbonizationOne stageGeneral MedicineaktivointichemistryChemical engineeringaktiivihiiliactivationCarbonthermal treatmentActivated carbonmedicine.drugC
researchProduct

Zinc Adsorption by Activated Carbon Prepared from Lignocellulosic Waste Biomass

2019

Sawdust was used as a precursor for the production of biomass-based activated carbon. Carbonization and activation are single-stage processes, and steam was used as a physical activation agent at 800 &deg

sinkki (metallit)hiili0211 other engineering and technologiesBiomass02 engineering and technology010501 environmental sciences01 natural scienceslcsh:Technologylcsh:ChemistryadsorbentGeneral Materials ScienceInstrumentationlcsh:QH301-705.5Fluid Flow and Transfer ProcessesCarbonizationzincGeneral Engineeringfood and beverageslcsh:QC1-999Computer Science Applicationsvisual_artvisual_art.visual_art_mediumSawdustmedicine.drugLignocellulosic biomasschemistry.chemical_elementZinccomplex mixturesAdsorptionmedicinebiomassa (teollisuus)lignocellulosic biomass0105 earth and related environmental scienceslignoselluloosa021110 strategic defence & security studiesKinetic modellcsh:TProcess Chemistry and TechnologycarbonizationchemistryChemical engineeringlcsh:Biology (General)lcsh:QD1-999lcsh:TA1-2040adsorptionregenerationadsorptiolcsh:Engineering (General). Civil engineering (General)lcsh:PhysicsActivated carbonApplied Sciences
researchProduct

Applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon

2023

Hybrid aspens have long attracted scientific interest, but the research on their use as feedstocks for chemical applications are still very limited. The bark biomass of the poplar species contains many valuable extractives that can be utilized as value-added products. This paper examines the applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon. To explore this, the study considers 1) the basic chemical composition of the bark in terms of added value potential, 2) the basic chemical composition of the bark extract and the effect of its pretreatment on the extract composition, 3) the production of rigi…

uutteetpuunkuoriRenewable Energy Sustainability and the Environmentbark extractiveForestrytremulatremuloidesrigid carbon foamuuttoXAD7HP-purificationaktiivihiiliactivated carbonbiomassa (teollisuus)Waste Management and DisposalAgronomy and Crop Sciencehybridihaapa
researchProduct