Search results for "adsorption"
showing 10 items of 1326 documents
Ellipsometric study of the physisorption of benzene on graphite
1987
The optical thickness of benzene on the (001) surface of a graphite single crystal has been studied by ellipsometry. Ellipsometric adsorption isotherms have been measured in the temperature range from 180 to 290 K. The maximum thickness of the adsorbed benzene film is constant in this temperature range and compares favourably with the value expected for one monolayer of molecules lying flat on the surface.
Evaluation of Thin Film Microextraction for trace elemental analysis of liquid samples using LIBS detection
2021
An analytical methodology based in the combination of Thin Film Microextraction with Laser-induced Breakdown Spectroscopy (TFME-LIBS) was investigated, for the first time, for detection of Cu, Cr, Ni and Pb in aqueous solutions. In this methodology, the analytes were extracted in a thin film of adsorbent material deposited on a solid support, which was introduced in the sample to analyse. After extraction, the analytes retained in the adsorbent were analysed by LIBS. In order to obtain adsorbent films useful for the microextraction step, two different experimental procedures for film generation, denoted as Drop Casting Deposition and Mould Deposition, were evaluated. In both cases, graphene…
TASCAを用いたCn, Nh, Fl化学実験のためのHg, Tl, PbのSiO2及びAu表面に対するオンライン化学吸着研究
2018
Online gas-solid adsorption studies with single atom quantities of Hg, Tl, and Pb on SiO$_{2}$ and Au surfaces were carried out using short-lived radioisotopes with half-lives in the range of 4-49 s. This is a model study to measure adsorption enthalpies of superheavy elements Cn, Nh, and Fl. The short-lived isotopes were produced and separated by the gas-filled recoil separator TASCA at GSI. The products were stopped in He gas, and flushed into gas chromatography columns made of Si detectors whose surfaces were covered by SiO$_{2}$ or Au. The short-lived Tl and Pb were successfully measured by the Si detectors with the SiO$_{2}$ surface at room temperature. On the other hand, the Hg did no…
Theoretical study on the influence of electric field direction on the photovoltaic performance of aryl amine organic dyes for dye-sensitized solar ce…
2019
It is very important to reveal the influence of different electric field directions on dye sensitizers. Thus, in this study, we investigated the electronic structures and optical properties of six designed aryl amine organic dye models under different electric fields using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Moreover, the electronic structures and optical properties of these studied dyes with different electric field in tetrahydrofuran (THF) were also calculated. The key parameters of the short-circuit current density (Jsc), including light harvesting efficiency (LHE) and intra-molecular charge transfer (ICT), are discussed in detail. With …
Alkaline treatment as a means to boost the activity of TiO(2)in selective photocatalytic processes
2020
In this work, the activity enhancement of TiO(2)photocatalysts by alkaline treatment has been investigated. Commercial (BDH, U.K., anatase phase) TiO(2)samples, treated in alkaline solutions of NaOH at different concentrations and temperatures, were tested for the photocatalytic partial oxidation of 3-pyridinemethanol in water under UVA irradiation to form vitamin B-3. Photocatalyst characterization has been carried out by XRD, BET, TEM, TGA, photoluminescence, FTIR, Raman, DRS, EPR and photocurrent measurements. The alkaline-treated samples showed an increased activity of up to 7 times (by considering first order rate constant values) compared to untreated BDH and the superior performance …
Combined Adsorption/Photocatalytic dye removal by copper-titania-fly ash composite
2020
Abstract Achieving both photocatalytic efficiency and adsorption capacity is essential to produce a highly efficient photocatalyst. This study fabricated a new photocatalyst by combining copper (Cu) doped titanium dioxide (TiO2) with fly ash (FA). The photocatalysts were synthesized using mild acid (acid-FA/Cu/TiO2), base (base-FA/Cu/TiO2), and deionized water (rFA/Cu/TiO2) activated FA. EDX confirmed the inclusion of Cu in both Cu/TiO2 and FA/Cu/TiO2 composites. XRD analysis indicated the presence of the anatase form of TiO2 after Cu doping and incorporation into modified FA. All three FA/Cu/TiO2 composites demonstrated high absorption (UV and visible region) compared to their TiO2 and Cu/…
Preparation characterization and photocatalytic activity of polycrystalline ZnO/TiO2 systems. 2. Surface, bulk characterization, and 4-nitrophenol ph…
2001
Electron spin resonance spectroscopy (ESR), Fourier transform infrared spectroscopy (FTIR), and monitoring of pyridine (py) and boric acid trimethyl ester (BATE) adsorption for determining surface acidity and basicity, respectively, were used to carry out further characterization of mixed ZnO/TiO2 polycrystalline solids prepared by different methods. Moreover, the powders were tested in a batch photoreactor for a probe reaction, i.e., 4-nitrophenol photodegradation in aqueous medium. ESR results indicated the presence of signals attributable to Zn+ species in ZnO/TiO2 (anatase) solids, while in ZnO/TiO2 (rutile) samples the presence of zinc induced only the formation of signals probably due…
Surface properties of iron-titania photocatalysts employed for 4-nitrophenol photodegradation in aqueous TiO2 dispersion
1994
Iron(III) doped specimens (0.01–5% atomic Fe ∶ Ti) have been prepared by impregnating polycrystalline “home prepared” TiO2 (mainly anatase) and have been studied for photocatalytic degradation of 4-nitrophenol in aqueous dispersions. Some structural and surface properties have been studied by X-ray diffraction, specific surface area and porosity measurements and FTIR monitoring of pyridine, ammonia and methanoic acid adsorption for surface acidity and basicity. Their surface properties were compared with a corresponding series of photocatalysts prepared by a coprecipitation method. Adsorption of pyridine and ammonia indicates the presence of surface acid Lewis sites, a low concentration of …
Anionic Organic Guests Incorporated in Zeolites: Adsorption and Reactivity of a Meisenheimer Complex in Faujasites
2005
Zeolites are suitable microporous hosts for positively charged organic species, but it is believed that they cannot adsorb organic anions. Pure Meisenheimer complex, derived from reduction of 2,4-dinitroaniline with NaBH4, was adsorbed inside faujasite cavities. Evidence for the internal incorporation of this negatively charged reaction intermediate comes from 1) XPS elemental analysis as a function of the depth of penetration into the particle, 2) the remarkable blue shift in lambda(max) of the Meisenheimer complex adsorbed on zeolite (ca. 470 nm) as compared to that in acetonitrile (580 nm) and 3) from the lack of reactivity with size-excluded hydride-acceptor reagents. Evidence is provid…
Characterization of poly(4-vinylpyridine 1-oxide) by free-solution capillary electrophoresis and micellar electrokinetic chromatography
2008
The migration characteristics of poly(4-vinylpyridine 1-oxide) (PVP-NO) in phosphate buffers of acidic pH (20 mM H 3 PO 4 or NaH 2 PO 4 ) have been studied using both free-solution capillary electrophoresis (FSCE) and MEKC. To inhibit adsorption, 250 mM o-phosphoethanolamine (2-aminoethyl dihydrogen phosphate) was used. In FSCE, PVP-NO showed a narrow peak and a broader band, both having anionic behavior. These peak and band were attributed to the free and aggregated or micellized PVP-NO forms, respectively. According to surface tension measurements, the CMC of SDS in the BGE was 1.8 and 0.48 mM in the absence and in the presence of 1000 μpg/mL PVP-NO, respectively, and the association of t…