Search results for "aktiivihiili"
showing 10 items of 20 documents
Bisphenol A removal from water by biomass-based carbon : Isotherms, kinetics and thermodynamics studies
2020
Biomass-based carbon was modified and used as an efficient bisphenol A (BPA) sorbent. The simple and environmentally friendly modification method produced sorbent with a capacity of 41.5 mg/g. The raw material was modified with FeCl3 (Fe-CR), treated with hydrochloric acid (H-CR) or modified with CaCl2 (Ca-CR). Batch sorption experiments were performed to evaluate the effects of the initial pH, sorbent dosage, temperature, and contact time on BPA removal. BPA removal with modified carbons was notably higher than that with unmodified carbon. All sorbent materials exhibited very high sorption capacities and compared favourably to materials reported in the literature. Several isotherms were ap…
Carbons from second generation biomass as sustainable supports for catalytic systems
2018
Abstract In this study activated carbons were produced from the wood of three different wood species (pine, birch, spruce). The resulting activated carbons were characterized in bulk for ash content, carbon content (elemental analyses), specific surface area, and pore size distribution, and at the surface by measuring the autogenerated pH and studying their structure by XPS. All the samples presented high surface areas and appeared to be mesoporous materials (mesopores >80%). The carbons were then used as support for AuPt nanoparticles and tested in the liquid phase oxidation of glycerol (GLY) and in the hydrogenation of levulinic acid (LA), two important chemicals from cellulose-based biom…
Removal of total organic carbon from peat solution by hybrid method : electrocoagulation combined with adsorption
2018
Humic substances end up in water from the drainage basin causing eutrophication and the spread of algae. These natural organic substances have an influence on the physical, chemical and biological properties of the water system. Adsorption and electrocoagulation (EC) are commonly used purification methods in the water and wastewater treatment. Both methods are used by themselves for removing a wide range of impurities. In this research, the novelty was to study the effect of combined activated carbon (AC) adsorption and electrocoagulation method on the removal of organic substances as total organic carbon (TOC) from the peat solution. With the hybrid method, TOC content was efficiently remo…
Activated carbon from hydrolysis lignin: Effect of activation method on carbon properties
2022
This study presents the effects of different activation methods to produce activated carbon from the hydrolysis lignin. Pretreatment of the feedstock with common mineral acids (HCL, HNO3, and H3PO4), different steam rates for physical activation, and different chemical activating agents (ZnCl2, Na2CO3, and KOH) for chemical activation were investigated. The pretreated biomass was carbonized and activated in one-stage process and the surface characteristics, such as total pore volume, pore size distribution and specific surface area, were investigated. The results showed that the activated carbon surface properties were not greatly affected by acid pretreatment. Brunauer-Emmett-Teller (BET) …
Characterization of Cobalt Catalysts on Biomass-Derived Carbon Supports
2017
Cobalt catalysts are known to have a high activity and selectivity in the Fischer–Tropsch reaction converting synthesis gas to higher hydrocarbons (C5+). These catalysts have been supported by different porous materials. Porous carbon materials like activated carbon (AC) have physical and chemical surface properties that affect the preparation of supported metal catalysts and can easily be tailored. In this study, AC was produced by carbonization and steam activation of lignin, a waste fraction from the Kraft pulping process. A series of Co/AC-catalysts was produced and characterized by several techniques. According to the results, tailored properties (high surface area, mesoporosity) were …
Lignin-based activated carbon-supported metal oxide catalysts in lactic acid production from glucose
2021
In this study, heterogeneous biomass-based activated carbon-supported metal oxide catalysts were prepared and tested for lactic acid production from glucose in aqueous solution. Activated carbons were produced from hydrolysis lignin by chemical (ZnCl2) or steam activation and modified with a nitric acid treatment and Sn, Al, and Cr chlorides to obtain carbon-based metal oxide catalysts. The modification of the carbon support by nitric acid treatment together with Sn and Al oxides led to an increase in lactic acid yield. The highest lactic acid yield (42%) was obtained after 20 minutes at 180 °C with the Sn/Al (5/2.5 wt.%) catalyst on steam-activated carbon treated by nitric acid. Reusabilit…
Production of ethyl lactate by activated carbon-supported Sn and Zn oxide catalysts utilizing lignocellulosic side streams
2021
In this study, activated carbon-supported Sn and Zn oxide catalysts were prepared from hydrolysis lignin and used for the conversion of model solutions of trioses, hexoses, and lignocellulosic biomass hydrolysates to ethyl lactate. Both catalysts, SnO2@AC and ZnO@AC, were able to produce ethyl lactate in high yields. SnO2@AC was a more active and selective catalyst in triose (dihydroxyacetone) conversion, providing 99% yield to ethyl lactate. ZnO@AC, by contrast, was more selective in glucose and hydrolysate conversion, with a yield of 60% and 85%, respectively. The ethyl lactate yields were significantly higher than those from the optimized model solution experiments when using ZnO@AC cata…
Comparison of the Properties of Activated Carbons Produced in One-Stage and Two-Stage Processes
2018
Activated carbons (ACs) can be produced from biomass in a thermal process either in a direct carbonization-activation process or by first carbonizing the biomass and later activating the bio-chars into activated carbons. The properties of the ACs are dependent on the type of process used for production. In this study, the properties of activated carbons produced in one-stage and two-stage processes are considered. Activated carbons were produced by physical activation of two types of starting materials: bio chars produced from spruce and birch chips in a commercial carbonization plant and from the corresponding raw chips. The activated carbons produced were characterized regarding specific …
Activated Carbon Production from Peat Using ZnCl2 : Characterization and Applications
2017
The process for producing activated carbon from peat was optimized. The peat was impregnated with different ratios of ZnCl2, and the impregnated biomass was activated at different temperatures. The specific surface area, pore size distribution, total carbon content, and yield of the activated carbon were investigated. The best results for the specific surface area and mesoporosity of the activated peat were obtained by using a high impregnation ratio (2) and high activation temperature (1073 K). Highly porous activated carbon was produced that had a specific surface area of approximately 1000 m2/g and total pore volume that was higher than 0.5 cm3/g for most samples. The activated carbon ha…
Applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon
2023
Hybrid aspens have long attracted scientific interest, but the research on their use as feedstocks for chemical applications are still very limited. The bark biomass of the poplar species contains many valuable extractives that can be utilized as value-added products. This paper examines the applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon. To explore this, the study considers 1) the basic chemical composition of the bark in terms of added value potential, 2) the basic chemical composition of the bark extract and the effect of its pretreatment on the extract composition, 3) the production of rigi…