Search results for "amorphou"

showing 10 items of 790 documents

Semiempirical correlation between the optical band gap of oxides and hydroxides and the electronegativity of their constituents

2000

AbstractOn the basis of new experimental results a previous proposed correlation between the optical band gap of oxides and the difference of electronegativity of their constituents is extended to mixed crystalline and amorphous TiO2-Fe2O3 (d,d-metal oxides) as well as to amorphous passive films grown on Al-Ta, Al-Ti, Al-Nb and Al-W alloys (sp,d-metal oxides). Moreover in analogy with previous results on anhydrous oxides, a correlation is proposed between the optical band gap of hydroxides and the electronegativities of their constituents after substituting the electronegativity of hydroxilic group to that of the oxygen. Like in the case of anhydrous oxides, two different interpolation line…

ElectronegativityMaterials sciencechemistryGroup (periodic table)Computational chemistryBand gapAnhydrouschemistry.chemical_elementPhysical chemistryOxygenAmorphous solid
researchProduct

Interactions between calcium precipitation and the polyphosphate-accumulating bacteria metabolism

2007

A sequencing batch reactor that is operated for biological phosphorus removal has been operated under different influent calcium concentrations to study the precipitation process and the possible effects of phosphorus precipitation in the biological phosphorus removal process. Four experiments were carried out under different influent calcium concentrations ranging from 10 to 90 g Ca m(-3). The experimental results and the equilibrium study, which are based on the saturation index calculation, confirm that the process controlling the calcium behaviour is the calcium phosphate precipitation. This precipitation takes place at two stages: initially, precipitation of the amorphous calcium phosp…

Environmental EngineeringPopulationchemistry.chemical_elementCalciumWaste Disposal Fluidchemistry.chemical_compoundPolyphosphatesChemical PrecipitationAmorphous calcium phosphateeducationWaste Management and DisposalIn Situ Hybridization FluorescenceWater Science and TechnologyCivil and Structural EngineeringCalcium metabolismeducation.field_of_studyBacteriaChemistryEcological ModelingPhosphorusPhosphatePollutionEnhanced biological phosphorus removalBiochemistryEnvironmental chemistryCalciumWaste disposalWater Research
researchProduct

Struvite formation from the supernatants of an anaerobic digestion pilot plant

2009

This work studied the influence of the characteristics of the supernatants on the struvite precipitation process. Eighteen experiments with the supernatants generated in an anaerobic digestion pilot plant were performed in a stirred reactor. In order to obtain the pH control during the crystallization process, a Fuzzy Logic based controller was used. High phosphorus precipitation and recovery efficiencies were obtained. The composition of the supernatants was analyzed in order to study its influence on the solids formed from those solutions. The presence of calcium reduced the percentage of phosphorus precipitated as struvite leading to the formation of amorphous calcium phosphate (ACP), wh…

Environmental EngineeringStruviteMagnesium Compoundschemistry.chemical_elementPilot ProjectsBioengineeringPhosphatesWater PurificationBacteria Anaerobicchemistry.chemical_compoundBioreactorsAmmoniumAmorphous calcium phosphateWaste Management and DisposalEffluentWaste managementRenewable Energy Sustainability and the EnvironmentPhosphorusEquipment DesignGeneral MedicinePhosphateEquipment Failure AnalysisAnaerobic digestionchemistryStruviteAerationWater Pollutants ChemicalNuclear chemistryBioresource Technology
researchProduct

Investigation of amorphous oxide film-electrolyte junctions by AC techniques

1992

Current AC (alternating current) techniques are used often to characterize the energetics at a semiconducting solid phase/electrolyte interface. For thin layers having a strongly disordered or amorphous structure (such as oxide-passive layers anodically grown on valve metals), interpretative models currently used for crystalline semiconductors may produce misleading data. A new interpretation of the admittance data, based on recent models for amorphous semiconductors (a-Sc) Schottky barriers, is presented for passive films of Nb, W and Ti. The physical bases of the model are presented as well as its advantages and disadvantages. The new theory views the solid/electrolyte interface more sati…

Environmental EngineeringThin layersbusiness.industryChemistryGeneral Chemical EngineeringSchottky barrierFermi levelInorganic chemistrySchottky diodeElectrolyteAmorphous solidsymbols.namesakeSemiconductorPhase (matter)symbolsOptoelectronicsbusinessBiotechnologyAIChE Journal
researchProduct

High-pressure structural and elastic properties of Tl2O3

2014

The structural properties of Thallium (III) oxide (Tl2O3) have been studied both experimentally and theoretically under compression at room temperature. X-ray powder diffraction measurements up to 37.7 GPa have been complemented with ab initio total-energy calculations. The equation of state of Tl2O3 has been determined and compared to related compounds. It has been found experimentally that Tl2O3 remains in its initial cubic bixbyite-type structure up to 22.0 GPa. At this pressure, the onset of amorphization is observed, being the sample fully amorphous at 25.2 GPa. The sample retains the amorphous state after pressure release. To understand the pressure-induced amorphization process, we h…

Equation of statePhase transitionMaterials scienceAb initioOxideGeneral Physics and AstronomyThermodynamicsFOS: Physical sciencesInitio molecular-dynamicsHigh-temperatureInduced amorphizationchemistry.chemical_compoundX-Ray DiffractionTotal-Energy calculationsCondensed Matter - Materials ScienceSingle crystalMaterials Science (cond-mat.mtrl-sci)Compression (physics)Crystal thallic oxideAmorphous solidchemistryAugmented-wave methodFISICA APLICADAElectrical-conductionOrthorhombic crystal systemPhase-transformationPowder diffraction
researchProduct

Formation of Calcium-Deficient Hydroxyapatite via Hydrolysis of Nano-Sized Pure Α-Tricalcium Phosphate

2015

Nano-sized pure α-tricalcium phosphate (α-TCP) fabricated by a novel synthesis approach shows great potential for a faster transformation into calcium-deficient hydroxyapatite (CDHA) than conventionally prepared α-TCP. In this work, amorphous tricalcium phosphate precursors were precipitated and treated with a solvent (water or ethanol), and dried (freeze-dried and oven-dried) before heating at 775 °C. Nanosized α-TCP powders were investigated for their phase composition and crystallinity, particle shape and size, reactivity and cellular biocompatibility. Reaction with water showed faster CDHA formation for freeze-dried powder, at 6 hours, compared to ethanol treated powders, whereas a high…

EthanolMaterials scienceBiocompatibilityInorganic chemistryGeneral Engineeringtechnology industry and agriculturecell responsePhosphateα-tricalcium phosphateSolventHydrolysischemistry.chemical_compoundCrystallinityAmorphous calcium phosphatechemistrycalcium-deficient hydroxyapatiteReactivity (chemistry)Amorphous calcium phosphateNuclear chemistry
researchProduct

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

2012

[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percen…

EthyleneSolucions polimèriquesPolymers and PlasticsInjection mouldingDifferential scanning calorimetry (DSC)Crystalline fractionsMechanical propertiesThermo-mechanical degradationchemistry.chemical_compoundDegradationAmorphous materialsPolymer blendsMaterials ChemistryMechanical recyclingRecyclingComposite materialDiethyleneglycolPoly(ethylene terephthalate) (PET)Injection moldingMolar massMechanical featureRecycled poly(ethylene terephthalate)Microstructural changesCondensed Matter PhysicsChain scissionRigid-amorphous fractionMechanics of MaterialsMAQUINAS Y MOTORES TERMICOSPolymer blendMaterials scienceMechanical performanceViscoelasticityEthyleneDifferential scanning calorimetrySegmental dynamicsInfrared analysis (FT-IR)Degradation reactionDifferential scanning calorimetryInjection mouldingPolyethylene terephthalatesEthylene glycolTermoplàsticsCrystalline materialsShorter chainsAmorphous solidchemistryGlass-rubber relaxationProcessing cyclesEthylene glycol
researchProduct

Hydrate Networks under Mechanical Stress – A Case Study for Co 3 (PO 4 ) 2 ·8H 2 O

2016

The nature of the bound water in solids with hydrogen-bonded networks depends not only on temperature and pressure but also on the nature of the constituents. The collapse and reorientation of these network structures determines the stability of hydrated solids and transitions to other crystalline or amorphous phases. Here, we study the mechanochemically induced loss of bound water in Co₃(PO₄)₂·8H₂O and compare this process to the behavior under hydrostatic pressure. The associated phase transition and its kinetics were monitored by X-ray powder diffraction with Synchrotron radiation and quantitative IR spectroscopy. High shearing forces are responsible for the degradation of the hydrogen-b…

Extended X-ray absorption fine structureAbsorption spectroscopyChemistryHydrostatic pressureInfrared spectroscopy02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnology01 natural sciences0104 chemical scienceslaw.inventionAmorphous solidInorganic ChemistryCrystallographyChemical engineeringlawBound waterCrystallization0210 nano-technologySpectroscopyEuropean Journal of Inorganic Chemistry
researchProduct

Fabrication and Photoelectrochemical Behavior of Ordered CIGS Nanowire Arrays for Application in Solar Cells

2010

In this work, we report some preliminary results concerning the fabrication of quaternary copper, indium, gallium, and selenium CIGS nanowires that were grown inside the channels of an anodic alumina membrane by one-step potentiostatic deposition at different applied potentials and room temperature. A tunable nanowire composition was achieved through a manipulation of the applied potential and electrolyte composition. X-ray diffraction analysis showed that nanowires, whose chemical composition was determined by energy-dispersive spectroscopy analysis, were amorphous. A composition of Cu0.203In0.153Ga0.131Se0.513, very close to the stoichiometric value, was obtained. These nanostructures wer…

FabricationMaterials scienceGeneral Chemical EngineeringNanowirechemistry.chemical_elementNanotechnologyCopper Indium Gallium Selenidechemistry.chemical_compoundCopper Indium Gallium Selenide; Solar Cells; Template Synthesis; Electrodeposition; Anodic Alumina MembranesElectrodepositionElectrochemistryGeneral Materials ScienceElectrical and Electronic EngineeringPhysical and Theoretical ChemistryGalliumAnodic Alumina MembranesPhotocurrentbusiness.industryCopper indium gallium selenide solar cellsAmorphous solidSettore ING-IND/23 - Chimica Fisica ApplicatachemistrySolar CellTemplate SynthesiOptoelectronicsbusinessCopper indium gallium selenideIndiumElectrochemical and Solid-State Letters
researchProduct

Density Fluctuation in Amorphous Polymers by Small Angle X-Ray Scattering

1984

Density fluctuations in an infinite volume can be obtained by extrapolating the scattering intensity to the zero scattering angle, while those in a finite volume having a radius of several tens of Angstrom can be obtained from intensities at non-zero scattering angles. Small angle X-ray scattering intensities for condensed phases were approximated by I(s)=I(0)exp(As2). This s dependence of the intensity arises from the repulsive interaction between two particles. Since the density fluctuations in the above two types of volume (infinite and finite) were nearly the same in magnitude and temperature dependence for an amorphous polymer (PMMA), it was concluded that no density fluctuations due t…

Finite volume methodMaterials sciencePolymers and PlasticsCondensed matter physicsSmall-angle X-ray scatteringbusiness.industryScatteringTransition temperatureRadiusAmorphous solidOpticsMaterials ChemistrybusinessGlass transitionIntensity (heat transfer)Polymer Journal
researchProduct