Search results for "aqueous solution"
showing 10 items of 1610 documents
Synthesis, Crystal Structures, and Magnetic Properties of a New Family of Heterometallic Cyanide-Bridged FeIII2MII2 (M = Mn, Ni, and Co) Square Compl…
2011
New heterobimetallic tetranuclear complexes of formula [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Mn(II)(bpy)(2)](2)(ClO(4))(2)·CH(3)CN (1), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2a), [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2b), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3a), and [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3b), [HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(Pz)(4)(-) = tetrakis(1-pyrazolyl)borate, dmphen = 2,9-dimethyl-1,10-phenanthroline, bpy = 2,2'-bipyridine] have been synthesized and structurally and magnetically characterized. Complexes 1-3b have be…
Structural properties and applications of multidentate [O,N,O,X'] aminobisphenolate metal complexies
2012
Abstract Aminobisphenols with side-arm donors are versatile tetradentate ligands that effectively coordinate to the metal ions in a tripodal fashion. Most of the metal ions form electrically neutral isolable complexes with aminobisphenolates with different side chains. However, some anionic complexes and zwitterions are also described. The coordination geometry of the metal centre can be controlled by the ligand design. Especially, the ortho -substituents of the phenolate moieties as well as the nature of side-arm donor influence the structure and reactivity of the complexes formed. Depending on the metal ion and the ligand environment, the complexes formed can be monomeric or dimeric ones.…
Bis‐μ‐pyrazolate‐Bridged Dinickel(II) and Dicopper(II) Complexes: An Example of Stereoelectronic Preference of Metal Ions and Stabilization of Mixed‐…
2007
New dimeric nickel(II) and copper(II) complexes [(L)Ni(μ-L′)]2[ClO4]21 and [(L)Cu(μ-L′)]2[ClO4]22, [2-[3-(2′-pyridyl)pyrazol-1-ylmethyl]pyridine (L) and 3-(2-pyridyl)pyrazole (HL′)] have been synthesized, structurally characterized, and their absorption, magnetic, EPR and redox properties investigated. The crystal structure of 1·MeCN reveals a planar {Ni2(μ-L′)2}2+ core [Ni···Ni separation: 4.0765(10) A] in which each distorted octahedral NiII ions is terminally coordinated by a tridentate ligand L and bridged by two HL′ units, in their deprotonated form. The structural analysis of 2·2MeCN reveals two five-coordinate CuII ions, each terminally coordinated by adopting only a bidentate coordi…
New family of thiocyanate-bridged Re(IV)-SCN-M(II) (M = Ni, Co, Fe, and Mn) heterobimetallic compounds: synthesis, crystal structure, and magnetic pr…
2012
The heterobimetallic complexes of formula [(Me(2)phen)(2)M(μ-NCS)Re(NCS)(5)]·CH(3)CN [Me(2)phen = 2,9-dimethyl-1,10-phenanthroline and M = Ni (1), Co (2), Fe (3), and Mn (4)] have been prepared, and their crystal structures have been determined by X-ray diffraction on single crystals. Compounds 1-4 crystallize in the monoclinic C2/c space group, and their structure consists of neutral [(Me(2)phen)(2)M(μ-NCS)Re(NCS)(5)] heterodinuclear units with a Re-SCN-M bridge. Each Re(IV) ion in this series is six-coordinated with one sulfur and five nitrogen atoms from six thiocyanate groups building a somewhat distorted octahedral environment, whereas the M(II) metal ions are five-coordinated with fou…
Construction of Coordination Polymers from Semirigid Ditopic 2,2′-Biimidazole Derivatives: Synthesis, Crystal Structures, and Characterization
2017
Eight coordination polymers (CPs), {[Ag(L1)]ClO4}n (1), {[Ag(L2)1.5]ClO4·C2H3N}n (2a), {[Ag(L2)]ClO4}n (2b), [Zn(L1)Cl2]n (3), {[Zn(L2)Cl2]·CHCl3}n (4), {[Cu(L1)2Cl]Cl·H2O}n (5), [Cu2(L2)(μ-Cl)2]n (6), and [Cu4(L2)(μ-Cl)4]n (7) were synthesized via self-assembly of corresponding metal ions and biimidazole based ditopic ligands, 1,1′-bis(pyridin-3-ylmethyl)-2,2′-biimidazole L1 and 1,1′-bis(pyridin-4-ylmethyl)-2,2′-biimidazole L2. These ligands possess conformational flexibility and two pairs of coordination sites: pyridine nitrogen (NPy) atoms and imidazole nitrogen (NIm) atoms. Depending on the metal center in CPs, the biimidazole compounds act as tetra- (1, 7), tri- (2a), or bidentate (2a,…
A new flow cell design for chemiluminiscence analysis.
2001
The present study proposes a new flow cell called a bundle cell for chemiluminescence analysis. The results obtained were compared with those achieved by manual and automated batch procedures and flow manifolds with different cells: an common quartz flow cell, a helix cell and the most used spiral cell. Figures of merit such as limit of detection, sensitivity, accuracy and precision for the Cr(III) determination were established with light emission produced by catalysed Cr(III) luminol oxidation by hydrogen peroxide in a basic aqueous solution. An improvement in sensitivity about 50% as compared with the spiral cell and even larger with respect to the other flow cells tested was observed. T…
On-line analysis of carbonyl compounds with derivatization in aqueous extracts of atmospheric particulate PM10 by in-tube solid-phase microextraction…
2011
Abstract A new device for carbonyl compounds based on coupling on-line and miniaturizing both, sample pretreatment and chromatographic separation, is reported. Two capillary columns, a GC capillary column (95% methyl–5% phenyl substituted backbone, 70 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve for in-tube solid-phase microextraction (IT-SPME) and a Zorbax SB C18 (150 mm × 0.5 mm i.d., 5 μm particle diameter) LC capillary column were employed. Different combinations of IT-SPME and derivatization using 2,4-dinitrophenylhydrazine (DNPH) were examined for mixtures containing 15 carbonyl compounds (aliphatic, aromatic and unsaturated aldehydes and ketones). A screening analys…
Determination of Phenol by Preconcentration‐Direct Chemiluminescence in a FIA Assembly
2005
Abstract The determination of phenol in water samples is proposed with the aid of a flow‐injection system. The analytical procedure is based on the direct chemiluminometric emission by oxidation of the analyte with potassium permanganate in acidic medium. The flow assembly is provided with a solid‐phase reactor filled with a resin type XAD‐4 for analyte preconcentration. A large study of potential interferences, namely, amino acids reaching water through degradation of organic matter; metals and inorganic metal ions typically present in water interfering with the CL emission of the parent compound, was performed. The calibration graph was linear over the phenol concentration range 1.0–20.0 …
Determination of carbonates in waters by on-line vapor generation FTIR
1998
Abstract An electrically heated gas-permeation unit (GPU) has been employed for the vapor-generation Fourier transform infrared (FTIR) determination of total carbonate in waters. The developed method is based on the simultaneous injection of 100 μ l sample and 100 μ l nitric acid in a two-channel manifold with a merging zone, which provides the generation of CO 2 through the GPU, heated at 90°C, from which CO 2 is swept by a stream of N 2 to a long-path infrared gas cell. Absorbance measurements were made in the range from 2500 to 2150 cm −1 and the corresponding flow injection recordings were obtained as a function of time. The areas of these peaks are interpolated in a calibration equatio…
Gas-chromatographic elemental analysis via di(trifluorethyl)dithiocarbamato-chelates
1986
The capillary-gas-chromatographic conditions for the determination of trace metals after extraction from aqueous solution are optimized by coupling of capillaries and improvement of injection technique. Different detectors (FID and ECD) are tested. pH range and buffer systems for extraction of metal chelates are discussed.