Search results for "aqueous solution"

showing 10 items of 1610 documents

Simulated solar UV-irradiation of endocrine disrupting chemical octylphenol.

2009

The photolysis of octylphenol (OP) was investigated using a solar simulator in the absence/presence of dissolved natural organic matter (DNOM), HCO(3)(-), NO(3)(-) and Fe(III) ions. The effects of different parameters such as initial pH, initial concentration of substrate, temperature, and the effect of hydrogen peroxide concentration on photodegradation of octylphenol in aqueous solution have been assessed. The results indicate that the oxidation rate increases in the presence of H(2)O(2), nitrate and DNOM. Phenol, 1,4-dihydroxylbenzene and 1,4-benzoquinone were identified as intermediate products of photodegradation of octylphenol, through an HPLC method. In addition, the disappearance of…

Environmental EngineeringUltraviolet RaysHealth Toxicology and MutagenesisInorganic chemistryEndocrine DisruptorsWater Purificationchemistry.chemical_compoundPhenolsEnvironmental ChemistryPhenolOrganic matterIrradiationPhenolsPhotodegradationHydrogen peroxideWaste Management and DisposalHumic Substanceschemistry.chemical_classificationIonsAqueous solutionPhotolysisChemistryTemperatureSubstrate (chemistry)Hydrogen PeroxideHydrogen-Ion ConcentrationPollutionSunlightWater Pollutants ChemicalJournal of hazardous materials
researchProduct

Multivariate Correlation between Analysis Data on Dissolved Organic Material from Scots Pine (Pinus sylvestris) Chips and their Autohydrolysis Pre-Tr…

2013

Various chemometric techniques were used to establish the relationship between the autohydrolysis conditions prior to pulping and the chemical compositions of the soluble organic materials removed from Scots pine (Pinus sylvestris) wood chips. The aqueous chip pre-treatments (autohydrolysis) were administered at 130 °C and 150 °C for 30, 60, 90, and 120 min, and the hydrolysates obtained were characterized in terms of total carbohydrates (various mono-, oligo-, and polysaccharides together with uronic acid side groups), volatile acids (acetic and formic acids), lignin, and furans (furfural and 5-(hydroxymethyl)furfural). Based on the analytical data gathered, a relatively accurate model for…

Environmental Engineeringlcsh:BiotechnologyCarbohydratesPrincipal component analysisligninBioengineeringUronic acidFurfuralHydrolysatechemistry.chemical_compoundlcsh:TP248.13-248.65volatile acidsLigninOrganic chemistryHydroxymethylBiorefiningFuransWaste Management and Disposalscots pineChromatographyAqueous solutionbiologyfungiScots pinebiology.organism_classificationAutohydrolysischemistrybiorefiningBioResources
researchProduct

Phospholipid-polyaspartamide micelles for pulmonary delivery of corticosteroids

2011

A novel drug delivery system for beclomethasone dipropionate (BDP) has been constructed through self-assembly of a pegylated phospholipid-polyaminoacid conjugate. This copolymer was obtained by chemical reaction of α,β-poly(N-2-hydroxyethyl)-DL-aspartamide (PHEA) with 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethyleneglycol)2000] (DSPE-PEG(2000)-NH(2)). Benefiting from the amphiphilic structure with the hydrophilic shell based on both PHEA and PEG and many hydrophobic stearoyl tails, PHEA-PEG(2000)-DSPE copolymer was able to self assemble into micelles in aqueous media above a concentration of 1.23 × 10(-7)M, determined by fluorescence studies. During the self-assembling …

ErythrocytesBiocompatibilityCell SurvivalDrug CompoundingDrug StorageALPHABETA-Poly(N-2-hydroxyethyl)-dl- aspartamide (PHEA) 12-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethyleneglycol)2000](DSPE-PEG2000-NH2) Polymeric micelles Drug delivery Beclomethasone dipropionate (BDP) Pulmonary diseasesPhospholipidPharmaceutical Science[object Object]HemolysisMicelleCell LinePolyethylene Glycolschemistry.chemical_compoundDrug StabilityAmphiphilePEG ratioPulmonary diseasesHumans?Beclomethasone dipropionate (BDP)Particle SizeLungMicellesDrug CarriersChromatographyAqueous solutionMolecular StructureChemistryPhosphatidylethanolaminesBeclomethasonetechnology industry and agriculture?-Poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA)Spectrometry FluorescenceSolubilitySettore CHIM/09 - Farmaceutico Tecnologico ApplicativoDrug deliveryDrug deliveryPolymeric micellesNanocarriersPeptidesHydrophobic and Hydrophilic InteractionsNuclear chemistry
researchProduct

Photochemical and photocatalytic isomerization of trans -caffeic acid and cyclization of cis -caffeic acid to esculetin

2016

Abstract The photoisomerization of trans-caffeic acid to cis-caffeic acid has been studied in the presence of N2 in homogeneous aqueous solutions and in suspensions of various TiO2 catalysts. The results supported the hypothesis of an energy transfer process from TiO2 to the substrate due to the recombination of the photogenerated electron–hole pairs. The differences among the measured photostationary [cis]/[trans] ratios have been attributed to the different physico-chemical properties of the catalysts. In particular, the lowest ratio measured in the presence of Merck TiO2 was ascribed to the very low adsorption of trans-caffeic acid onto the surface of this sample. In the presence of O2 a…

Esculetin formationPhotoisomerization02 engineering and technology010402 general chemistryPhotochemistry01 natural sciencesCatalysisCatalysiCatalysischemistry.chemical_compoundAdsorptionPhotoisomerizationCaffeic acidTiO2General Environmental ScienceCaffeic acidSettore ING-IND/24 - Principi Di Ingegneria ChimicaAqueous solutionChemistryProcess Chemistry and Technologyfood and beveragesSubstrate (chemistry)021001 nanoscience & nanotechnology0104 chemical sciencesPhotocatalysisSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie0210 nano-technologyIsomerizationEnergy transfer proceApplied Catalysis B: Environmental
researchProduct

Spectroscopic studies of 5,5′-dimethoxy-3,3,′-disulfobutyl-9-ethylthiacarbocyanine (DDTC) in solutions and immobilized in sol-gel matrices

1998

Abstract Absorption spectra of 5,5′-dimethoxy-3,3,′-disulfobutyl-9-ethylthiacarbocyanine (DDTC) in aqueous solutions and immobilized in xerogels prepared by the sol-gel method were obtained. Influence of pH, detergent (Triton X-100), ethanol addition and sol-gel preparation method on the dye aggregation equilibria and its photostability were investigated. In liquid solutions lowering of pH, as well as addition of the detergent, shift the aggregation equilibrium towards the DDTC monomeric form. However, while more acidic conditions result in a decrease of the dye stability, addition of the detergent has a slightly stabilizing effect on the dye. However, addition of ethanol drastically reduce…

EthanolAqueous solutionAbsorption spectroscopyChemistryDimerOrganic ChemistryDopingInorganic chemistryAnalytical ChemistryInorganic ChemistryPreparation methodchemistry.chemical_compoundMonomerSpectroscopySol-gelJournal of Molecular Structure
researchProduct

Formation of lead by reduction of electrodeposited PbO2: comparison between bulk films and nanowires fabrication

2012

Metallic lead was deposited, both in form of bulk films and nanowire array within pores of anodic alumina membranes, following a new two-step procedure, consisting in anodic electrodeposition of α-PbO2, followed by its reduction to metallic lead. This method allows to overcome drawbacks of the “direct” electrodeposition of lead from aqueous solution, consisting, essentially, in the formation of dendritic deposits. Here, we report the comparison between results obtained in the two cases and discuss the kinetic of oxide reduction both for films and nanowires. Deposit morphology and structure are also discussed. We have found that reduction of α-PbO2 films proceeds always at high speed and uni…

FabricationMaterials scienceAqueous solutionMetallurgyOxideNanowireCondensed Matter PhysicsElectrochemistryAnodeMetalchemistry.chemical_compoundSettore ING-IND/23 - Chimica Fisica ApplicatachemistryChemical engineeringvisual_artElectrochemistryvisual_art.visual_art_mediumGeneral Materials ScienceCrystallitelead oxide lead nanostructures film electrodepositionElectrical and Electronic Engineering
researchProduct

Metal-organic magnets with large coercivity and ordering temperatures up to 242°C.

2020

International audience; Magnets derived from inorganic materials (e.g., oxides, rare-earth–based, and intermetallic compounds) are key components of modern technological applications. Despite considerable success in a broad range of applications, these inorganic magnets suffer several drawbacks, including energetically expensive fabrication, limited availability of certain constituent elements, high density, and poor scope for chemical tunability. A promising design strategy for next-generation magnets relies on the versatile coordination chemistry of abundant metal ions and inexpensive organic ligands. Following this approach, we report the general, simple, and efficient synthesis of light…

FabricationMaterials sciencemagneettiset ominaisuudetPyrazineMetal ions in aqueous solutionmagneetitIntermetallicNanotechnology02 engineering and technologyorganometalliyhdisteet010402 general chemistrylarge coercivity7. Clean energy01 natural sciencesordering temperaturesCoordination complexchemistry.chemical_compoundMoleculechemistry.chemical_classificationMultidisciplinarymetal-organic magnets[CHIM.MATE]Chemical Sciences/Material chemistrykompleksiyhdisteetCoercivity021001 nanoscience & nanotechnologykiteet0104 chemical scienceschemistryMagnetlämpötila0210 nano-technologyScience (New York, N.Y.)
researchProduct

Effects of confinement on insulin amyloid fibrils formation.

2006

Insulin, a 51-residue protein universally used in diabetes treatment, is known to produce amyloid fibrils at high temperature and acidic conditions. As for other amyloidogenic proteins, the mechanisms leading to nucleation and growth of insulin fibrils are still poorly understood. We here report a study of the fibrillation process for insulin confined in a suitable polymeric hydrogel, with the aim of ascertain the effects of a reduced protein mobility on the various phases of the process. The results indicate that, with respect to standard aqueous solutions, the fibrillation process is considerably slowed down at moderately high concentrations and entirely suppressed at low concentration. M…

FibrillationAmyloidAqueous solutionAdverse conditionsChemistryInsulinmedicine.medical_treatmentDiffusionTemperatureBiophysicsNucleationmacromolecular substancesGeneral MedicineHydrogen-Ion ConcentrationFibrilAmyloid fibrilHydrogel Polyethylene Glycol DimethacrylateBiochemistryPolyvinyl AlcoholmedicineBiophysicsAnimalsInsulinCattlemedicine.symptom
researchProduct

Rapid chemical separation procedures

1976

Fast, discontinuous separation procedures are described for zirconium, niobium, technetium and antimony from fission products. Other rapid separation methods from aqueous solutions are summarized. The combination of a gas jet recoil transport system with a continuous solvent extraction technique and with a thermochromatographic separation method is presented. The application of such procedures to the investigation of new and already known short-lived nuclides is illustrated by some examples.

Fission productsZirconiumJet (fluid)Aqueous solutionChemistryHealth Toxicology and MutagenesisRadiochemistryPublic Health Environmental and Occupational HealthAnalytical chemistryNiobiumchemistry.chemical_elementPollutionAnalytical ChemistryChemical separationNuclear Energy and EngineeringAntimonyRadiology Nuclear Medicine and imagingNuclidePhysics::Chemical PhysicsNuclear ExperimentSpectroscopyJournal of Radioanalytical Chemistry
researchProduct

Effect of high methoxyl pectin on pea protein in aqueous solution and at oil/water interface

2010

International audience; The effect of the addition of high methoxyl pectin on the stability of pea protein isolate emulsions was investigated. Except for low pectin concentrations at acidic pHs where bridging flocculation occurred the addition of pectin improved emulsion stability to pH changes and depletion flocculation induced by maltodextrin addition. The mechanism of pectin induced stability was probed by measuring protein-pectin complex formation in solution, zeta potential of the emulsions droplets and the change in surface viscoelasticity on pectin addition. The phase diagrams of pectin-pea protein isolate in solution and pectin-pea protein-stabilized emulsions were established based…

Flocculationanimal structuresfood.ingredientPolymers and PlasticsPectinEmulsion stabilitymacromolecular substancescomplex mixtureschemistry.chemical_compoundfood[SDV.IDA]Life Sciences [q-bio]/Food engineeringMaterials ChemistryZeta potential[SPI.GPROC]Engineering Sciences [physics]/Chemical and Process EngineeringAqueous solutionChromatographyInterfacial complexationPea proteindigestive oral and skin physiologyOrganic Chemistryfood and beveragesComplex formationMaltodextrinPectinPhase diagramInterfacial elasticitychemistryChemical engineeringPlant proteinPea proteinEmulsionCarbohydrate Polymers
researchProduct