Search results for "attenuation"
showing 10 items of 283 documents
Investigation of Coating Impact on OFDR Optical Remote Fiber-Based Sensors Performances for Their Integration in High Temperature and Radiation Envir…
2016
The response of optical frequency-domain reflectometry-based temperature sensors is here investigated in harsh environments (high temperature, high radiation dose) focusing the attention on the impact of the fiber coating on the sensor performances in such conditions. Our results demonstrate that the various coating types evolve differently under thermal treatment and/or radiations, resulting in a small (<5%) change in the temperature coefficient of the sensor. The identified procedure, consisting of a prethermal treatment of the fiber at its maximum coating operating temperature, is here verified up to 150 °C for higherature acrylate and up to 300 °C for polyamide coating. This method allo…
Photoluminescence time decay of surface oxygen deficient centers in un‐doped and Ge‐doped silica
2005
We report a study of the emission decay from the singlet excited state of two fold coordinated Si and Ge centers stabilized on the surface of silica and Ge-doped silica. The PL lifetimes are of the order of nanoseconds and increase on decreasing the temperature. The results suggest that, for the surface centers, the phonon assisted intersystem-crossing process linking the excited states affects the decay rates, is effective down to low temperatures and is distributed because of the inhomogeneity of the defects. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Near‐IR Radiation‐Induced Attenuation of Aluminosilicate Optical Fibers
2021
The X-ray radiation-induced attenuation (RIA) growth kinetics are studied online in different single-mode aluminosilicate optical fibers in the near-IR (NIR) domain to evaluate their potential in terms of dosimetry. The optical fibers differ by Al contents, core sizes, drawing parameters, and also by a preform deposition process. The data show no dependence of the RIA on all these parameters, a positive result for the design of point or distributed radiation detectors exploiting RIA to monitor the dose. The RIA growth rate is unchanged for dose rates changing from 0.073 to 6.25 Gy(SiO2) s−1, and the RIA linearly increases with the dose up to 2 kGy(SiO2). Small but noticeable RIA changes are…
Properties of Gd-Doped Sol-Gel Silica Glass Radioluminescence under Electron Beams
2022
International audience; The radiation-induced emission (RIE) of Gd3+-doped sol–gel silica glass has been shown to have suitable properties for use in the dosimetry of beams of ionizing radiation in applications such as radiotherapy. Linear electron accelerators are commonly used as clinical radiotherapy beams, and in this paper, the RIE properties were investigated under electron irradiation. A monochromator setup was used to investigate the light properties in selected narrow wavelength regions, and a spectrometer setup was used to measure the optical emission spectra in various test configurations. The RIE output as a function of depth in acrylic was measured and compared with a reference…
Experimental evolution of an RNA virus in cells with innate immunity defects
2015
Experimental evolution studies have shown that RNA viruses respond rapidly to directional selection and thus can adapt efficiently to changes in host cell tropism, antiviral drugs, or other imposed selective pressures. However, the evolution of RNA viruses under relaxed selection has been less extensively explored. Here, we evolved vesicular stomatitis virus in mouse embryonic fibroblasts knocked-out for PKR, a protein with a central role in antiviral innate immunity. Vesicular stomatitis virus adapted to PKR-negative mouse embryonic fibroblasts in a gene-specific manner, since the evolved viruses exhibited little or no fitness improvement in PKR-positive cells. Full-length sequencing revea…
Model of line to shield power line communication system on a Medium Voltage network
2010
In this paper a complete model of a power line communication (PLC) system on a Medium Voltage (MV) network is presented in the case of a line-ground configuration. A simple and friendly Simulink (R) software is used to develop the model. A distributed parameter MV cable model in line-ground configuration is considered together with the power transformers, the signal coupling networks and the receiving and transmitting line coupling interface of a ST7540 FSK powerline transceiver. The performances of the complete PLC communication system are evaluated for different line lengths by means of the attenuation computed as ratio between the received and transmitted voltage signals.
Power Line Communication in Medium Voltage Systems: Characterization of MV Cables
2008
The aim of this paper is to illustrate the development of a theoretical and experimental study on the characterization of medium voltage (MV) cables in the frequency range 25-200 kHz. Two transmission line configurations, line-ground and line-line, were considered in order to evaluate the main parameters, such as the characteristic impedance and the attenuation constant alpha. A simplified model of the line-ground configuration is proposed which allows one to evaluate the characteristic impedance and the attenuation constant by means of geometrical dimensions. The model was verified by experimental measurements on commonly used MV cables, RG7H1R, with an aluminium core of different sections…
Simulation of a Power Line Communication System in Medium and Low Voltage Distribution Networks
2011
The aim of the paper is to study the influence of the power transformer on signal transmission in the case of a power line communication (PLC) system in a overhead Medium Voltage (MV) power network. A model of the PLC system was carried out by means of the Simulink® software. A distributed parameter MV overhead line, two power transformers, the signal coupling networks and the receiving and transmitting line coupling interface of a ST7540 FSK powerline transceiver were included in the model. The performances of the complete PLC communication system are evaluated for different line lengths by means of the attenuation computed as ratio between the received and transmitted voltage signals.
Two-Tier Care Pathways for Liver Fibrosis Associated to Non-Alcoholic Fatty Liver Disease in HIV Mono-Infected Patients.
2022
(1) Background: Developing strategies to identify significant liver fibrosis in people with HIV (PWH) is crucial to prevent complications of non-alcoholic fatty liver disease (NAFLD). We aim to investigate if five simple serum biomarkers applied to PWH can optimize a care pathway to identify significant liver fibrosis defined by transient elastography (TE). (2) Methods: A two-tier fibrosis pathway was applied to three prospective cohorts of PWH undergoing TE with CAP. NAFLD was diagnosed as a controlled attenuation parameter ≥ 248 dB/m. Five simple fibrosis biomarkers (FIB-4 < 1.3, BARD score 0–1, NAFLD fibrosis score < −1.455, AST:ALT ratio < 0.8 and APRI < 0.5) …
Soundscape design through evolutionary engines
2008
Abstract Two implementations of an Evolutionary Sound Synthesis method using the Interaural Time Difference (ITD) and psychoacoustic descriptors are presented here as a way to develop criteria for fitness evaluation. We also explore a relationship between adaptive sound evolution and three soundscape characteristics: keysounds, key-signals and sound-marks. Sonic Localization Field is defined using a sound attenuation factor and ITD azimuth angle, respectively (Ii, Li). These pairs are used to build Spatial Sound Genotypes (SSG) and they are extracted from a waveform population set. An explanation on how our model was initially written in MATLAB is followed by a recent Pure Data (Pd) impleme…