Search results for "boundary element method"
showing 10 items of 170 documents
A Coupled Solid-Fluid Method for Modeling Subduction
2007
International audience; We present a novel dynamic approach for solid/fluid coupling by joining two different numerical methods: Boundary Element Method (BEM) and Finite Element Method (FEM). FEM results describe the thermo-mechanical evolution of the solid while the fluid is solved with the BEM. The bidirectional feedback between the two domains evolves along a Lagrangian interface where the FEM domain is embedded inside the BEM domain. The feedback between the two codes is based on the calculation of a specific drag tensor for each boundary/finite element. The approach is presented here to solve the complex problem of the descent of a cold subducting oceanic plate into a hot fluid like ma…
BEM Formulation of the Trailing Edge Condition
1995
This paper deals with a BEM formulation of the trailing edge condition to determine the potential flow field around an airfoil. It is seen the trailing edge condition is not sufficient to give an unique solution. It is necessary to assign a further condition to eliminate the nonuniqueness of the solution. The approach allows to adopt a discretization into superior order elements. Some preliminary applications show the validity of the formulation.
Microcracking in piezoelectric materials by the Boundary Element Method
2019
A 3D boundary element model for piezoelectric polycrystalline micro-cracking is discussed in this contribution. The model is based on the boundary integral representation of the electro-mechanical behavior of individual grains and on the use of a generalized cohesive formulation for inter-granular micro-cracking. The boundary integral formulation allows to address the electro-mechanical boundary value problem in terms of generalized grain boundary and inter-granular displacements and tractions only, which implies the natural inclusion of the cohesive laws in the formulation, the simplification of the analysis pre-processing stage, and the reduction of the number of degrees of freedom of the…
Modelling stress-corrosion microcracking in polycrystalline materials by the Boundary Element Method
2019
The boundary element method is employed in this study in conjunction with the finite element method to build a multi-physics hybrid numerical model for the computational study of stress corrosion cracking related to hydrogen diffusion in polycrystalline microstructures. More specifically a boundary integral representation is used to represent the micro-mechanics of the aggregate while an explicit finite element method is used to model inter-granular hydrogen diffusion. The inter-granular interaction between contiguous grains is represented through cohesive laws, whose physical parameters depend on the concentration of inter-granular hydrogen, diffusing along the interfaces according to the …
A BOUNDARY ELEMENT FORMULATION FOR MICROMECHANICAL HOMOGENIZATION OF POLYCRYSTALLINE MATERIALS WITH PIEZOELECTRIC COUPLING
2019
A novel boundary element formulation for the evaluation of the effective properties of threedimensional polycrystalline aggregates with piezoelectric coupling is presented. The aggregates are modelled at the scale of their constituent crystals and are artificially generated through Voronoi-Laguerre tessellations. The electro-mechanical behaviour of each crystal is represented upon introducing an ad-hoc mesh of its boundary and a generalised integral representation of the governing equations of the piezoelectric problem. The behaviour of the whole aggregate is then retrieved upon introducing a suitable set of electro-mechanical interface conditions at the grain boundaries. With respect to cl…
A boundary element model for piezoelectric dynamic strain sensing of cracked structures
2011
A piezoelectric sensor model is here presented for the Structural Health Monitoring (SHM) of damaged structures. A boundary element approach based on the Dual Reciprocity BEM is then used to model and analyze the transient response of a piezoelectric patch bonded on a cracked beam. The BE model is written for the piezoelectric problem employing generalized displacements. The multidomain boundary element technique is implemented to model non-homogeneous and cracked configuration, taking contact conditions into account. Analyses have been carried out for an isotropic beam with a piezoelectric strip attached on it and dynamical results for the undamaged structure have been compared with FE res…
A multiscale approach to polycrystalline materials damage and failure
2015
A two-scale three-dimensional approach for degradation and failure in polycrystalline materials is presented. The method involves the component level and the grain scale. The damageinduced softening at the macroscale is modelled employing an initial stress boundary element approach. The microscopic degradation is explicitly modelled associating Representative Volume Elements (RVEs) to relevant points of the macro continuum and employing a cohesive-frictional 3D grain-boundary formulation to simulate intergranular degradation and failure in the Voronoi morphology. Macro-strains are downscaled as RVEs' periodic boundary conditions, while overall macro-stresses are obtained upscaling the micro…
Porosity effects on elastic properties of polycrystalline materials: a three-dimensional grain boundary formulation
2013
Polycrystalline materials are widely used in many technological applications of engineering interest. They constitute an important class of heterogeneous materials, and the investigation of the link between their macro and micro properties, main task of the micromechanics [1], is of relevant technological concern. The internal structure of a polycrystalline material is determined by the size and the shape of the grains, by their crystallographic orientation and by different type of defects within them. In this sense, the presence of internal voids, pores, is important to take into account in the determination of the polycrystalline aggregate properties. Porosity exists in almost all materia…
Polycrystalline materials with pores: effective properties through a boundary element homogenization scheme
2014
In this study, the influence of porosity on the elastic effective properties of polycrystalline materials is investigated using a formulation built on a boundary integral representation of the elastic problem for the grains, which are modeled as 3D linearly elastic orthotropic domains with arbitrary spatial orientation. The artificial polycrystalline morphology is represented using 3D Voronoi tessellations. The formulation is expressed in terms of intergranular fields, namely displacements and tractions that play an important role in polycrystalline micromechanics. The continuity of the aggregate is enforced through suitable intergranular conditions. The effective material properties are ob…
A cohesive boundary element approach to material degradation in three-dimensional polycrystalline aggregates
2013
A new three-dimensional grain-level formulation for intergranular degradation and failure in polycrystalline materials is presented. The polycrystalline microstructure is represented as a Voronoi tessellation and the boundary element method is used to express the elastic problem for each crystal of the aggregate. The continuity of the aggregate is enforced through suitable conditions at the intergranular interfaces. The grain-boundary model takes into account the onset and evolution of damage by means of an irreversible linear cohesive law, able to address mixed-mode failure conditions. Upon interface failure, a non-linear frictional contact analysis is introduced for addressing the contact…