Search results for "boundary"
showing 10 items of 1626 documents
Phase separation in the quaternary Heusler compound CoTi(1−x)MnxSb – A reduction in the thermal conductivity for thermoelectric applications
2010
We investigate the phase separation of the solid solution CoTi(1−x)MnxSb into the two Heusler compounds CoTiSb and CoMnSb. Energy-dispersive X-ray spectroscopy measurements on the two-phase material reveal the presence of size- and shape-tunable CoTiSb regions in a CoMnSb matrix. We demonstrate that the formed phase and grain boundaries have a considerable influence on the phonon scattering processes, which leads to a reduction in the thermal conductivity by a factor of three compared to single-phase CoTiSb.
Modelling of Pe C alloys solidification using the artificial heat source method
1997
Abstract In the paper the numerical solutions concerning the cast iron and also the carbon steel solidification are presented. In order to take into account the non-linearities appearing in differential equations describing the boundary-initial problem considered — a certain algorithm called the artificial heat source method has been used. The examples illustrating the possibilities of proposed method applications have been solved by means of the boundary element method, but the others numerical methods can be also utilized.
Effects of Pressure, Temperature, and Particles Size on O2 Diffusion Dynamics in Silica Nanoparticles
2013
The O2 diffusion process in silica nanoparticles is experimentally studied in samples of average radius of primary particles ranging from 3.5 to 20 nm and specific surface ranging from 50 to 380 (m2/g). The investigation is done in the temperature range from 98 to 177 °C at O2 pressure ranging from 0.2 to 66 bar by measuring the interstitial O2 concentration by Raman and photoluminescence techniques. The kinetics of diffusion can be described by the Fick’s equation with an effective diffusion coefficient depending on the temperature, O2 pressure, and particles size. In particular, the dependence of the diffusion coefficient on the pressure and nanoparticles size is more pronounced at lower …
A micro-mechanical model for grain-boundary cavitation in polycrystalline materials
2015
In this work, the grain-boundary cavitation in polycrystalline aggregates is investigated by means of a grain-scale model. Polycrystalline aggregates are generated using Voronoi tessellations, which have been extensively shown to retain the statistical features of real microstructures. Nucleation, thickening and sliding of cavities at grain boundaries are represented by specific cohesive laws embodying the damage parameters, whose time evolution equations are coupled to the mechanical model. The formulation is presented within the framework of a grain-boundary formulation, which only requires the discretization of the grain surfaces. Some numerical tests are presented to demonstrate the fea…
Structure and oxide ion conductivity: local order, defect interactions and grain boundary effects in acceptor-doped ceria
2014
The long-range and short-range structure of nanocrystalline and microcrystalline acceptor-doped ceria is investigated by a combined approach using EXAFS, XANES, Raman, and XRD, and correlated with the oxide-ion conductivity in the bulk and in grain boundaries. Compared to Yb3+ and Er3+, the positive influence of Sm3+ is attributed to the ability to repel oxygen vacancies, and to keep a localized disorder around the dopant. The long-range structural analysis shows lattice contraction for Yb- and Er-doping and lattice expansion for Sm-doping. The short-range analysis around the dopants and cerium highlights that a more complex structural rearrangement has to be assumed to explain the compleme…
Mn2+-induced room-temperature ferromagnetism and spin-glass behavior in hydrothermally grown Mn-doped ZnO nanorods
2014
The magnetic properties of Mn-doped ZnO (ZnO:Mn) nanorods grown by hydrothermal process at a temperature of 200 °C and a growth time of 3 h have been studied. The samples were characterized by using powder X-ray diffraction with Rietveld refinement, scanning electron microscopy, energy-dispersive X-ray analysis and SQUID magnetometry. Mn (3 wt%) and (5 wt%)-doped ZnO samples exhibit paramagnetic and ferromagnetic behavior, respectively, at room temperature. The spin-glass behavior is observed from the samples with respect to the decrease of temperature. At 10 K, both samples exhibit a hysteresis loop with relatively low coercivity. The room-temperature ferromagnetism in 5 wt% Mn-doped ZnO n…
Study of the Dielectric Properties of Europium Doped Barium Titanate Ceramics by an Impedance Spectroscopy
2015
The barium titanate (BaTiO3) and the BaTiO3 + 0.1wt.% Eu2O3 ceramics were prepared by a conventional ceramic method. The structural studies were carried out by means of an X-ray diffraction technique. The influence of the grains and the grain boundaries on the electrical properties was investigated using a impedance spectroscopy. This technique enables us to determine the values of grain and grain boundary resistance. The results show that the Eu doping leads to a significant reduction in the resistance value of the grains (˜105Ω) with respect to the pure BT ceramics (˜107Ω). The conductivity processes were determined from the Arrhenius behaviour of grain and grain boundary resistances.
Effects of Grain Boundary Decoration on the Electrical Conduction of Nanocrystalline CeO2
2012
In this study, we investigate the effect of decorating the grain boundaries of nanocrystalline undoped ceria on the electrical transport properties. For the decoration, different acceptors (Yb, Y, Bi) were chosen. On decoration, the conduction switches from electronic to ionic. Upon sintering the grains are characterized by a core-shell configuration, in which the core remains undoped while the shell is heavily doped as a consequence of the diffusion of the acceptors toward the grain interior. The shell dominates the overall transport properties of the nanocrystalline ceria and is found to be in the mesoscopic regime.
The combined effect of refractory coatings containing reactive elements on high temperature oxidation behavior of chromia-forming alloys
2003
Abstract The high temperature oxidation behaviors of chromia-forming alloys (F17Ti and Fe–30Cr alloys) have been studied at 1273 K under isothermal conditions and at 1223 K under cyclic conditions, in air under the atmospheric pressure. To extend the oxidation lifetime, coatings have been applied onto the alloy surfaces. Al2O3 and Cr2O3 films doped with Sm2O3 or Nd2O3 were prepared via the metal-organic chemical vapor deposition technique. Single Cr2O3, Al2O3, Nd2O3 and codeposited Cr2O3–Nd2O3, Al2O3–Nd2O3, Al2O3–Sm2O3 coatings drastically improved the chromia-forming alloy high temperature oxidation behavior, since they decreased the oxidation rate and enhanced the oxide scale adhesion. Re…
Ultrafast luminescence of Ga- and In-doped ZnO ceramics
2021
The work of authors (a-c) was financially supported by Russian Foundation for Basic Research (RFBR, Russia) and the work of the last author (d) had financial support from State Education Development Agency (VIAA, Latvia) . All of that was approved as a result of ERA.Net RUS PLUS 2017 joint call for proposals. Here is the link for the joint call for reference: https://www.eranet-rus.eu/en/196.php .