Search results for "carbon black"
showing 10 items of 33 documents
Identification of carbonaceous geosorbents for PAHs by organic petrography in river floodplain soils.
2007
Organic petrographic analysis was applied to provide direct information on carbonaceous geosorbents for PAHs in river floodplain soils. The anthropogenic OM group (primarily coal and coal-derived particles) displayed large volume amounts for all the soil samples. Distinct PAH concentrations with similar PAH distribution patterns were determined in grain size and density fractions for each sample. Two-ring PAHs had stronger correlation to organic carbon (OC) than black carbon (BC) contents, while heavier PAHs showed correlation to BC, rather than OC. In this study, we combined grain size and density separation, PAH determinations, TOC and BC measurements, and organic petrographic identificat…
Anomalous water diffusion in epoxy/carbon nanoparticle composites
2019
Abstract Water absorption-desorption-resorption and swelling were studied for a DGEBA-based amine-cured epoxy resin filled with four types of carbon nanoparticles: multiwall carbon nanotubes (MWCNT), graphite nano-platelets (GnP), expanded graphite platelets, and carbon black. Nanocomposites are characterised by lower diffusivity (down to 20% for epoxy/GnP) and increased water sorption capacity compared to the neat epoxy. Anomalous water absorption and swelling of nanocomposites is finely described by the diffusion-relaxation model. The relaxation times, considered as quantitative indicators of changes in segmental mobility of the polymer, increased with addition of nanoparticles and decrea…
Improvement of oxidation resistance of polymer-based nanocomposites through sonication of carbonaceous nanoparticles
2020
Abstract The work aim is focused on two different aspects: first, the investigation of the effect of extended ultra-sound-assisted treatment (us) of carbonaceous nanoparticles, such as carbon nanotubes (CNTs) and carbon black (CB), on their radical scavenging activity, and second, the investigation of the oxidative resistance of polymer-based nanocomposites, containing us-treated CNTs and CB. Particularly, the CNTs and CB have been subjected to us sonication for different time intervals and the performed analysis reveals that both kinds of nanoparticles show decreased average hydrodynamic diameters and large content of surface defects. Really, the increased content of CNTs and CB defects, a…
Epoxy Resin/Carbon Black Composites Below the Percolation Threshold
2013
International audience; A set of epoxy resin composites filled with 0.25-2.0 wt.% of commercially available ENSACO carbon black (CB) of high and low surface area (CBH and CBL respectively) has been produced. The results of broadband dielectric spectroscopy of manufactured CB/epoxy below the percolation threshold in broad temperature (200 K to 450 K) and frequency (20 Hz to 1 MHz) ranges are reported. The dielectric properties of composites below the percolation threshold are mostly determined by alpha relaxation in pure polymer matrix. The glass transition temperature for CB/epoxy decreases in comparison with neat epoxy resin due to the extra free volume at the polymer-filler interface. At …
Electrochemical Impedance Spectra of Particulate Matter and Smoke
2011
Particularly aerosol particles of fine dimensions are recognized to have a strong impact on the climate change, on the atmospheric energy budget, on the environment and on human health. In this study coarse aerosol particles with different black carbon mass concentrations were investigated by electrochemical impedance spectroscopy. Present work describes preparation of particulate matter samples for impedance measurements, the principles of the structure of electrochemical cell and the relationship between parameters obtained from impedance spectra and black carbon mass concentration. Using complex electrode it is possible to obtain qualitative impedance spectra of particulate matter which …
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
Hierarchical porous carbon with designed pore architecture and study of its adsorptive properties
2010
Abstract Ordered mesoporous carbon nanoparticles have been synthesized by a nanocasting procedure from furfuryl alcohol impregnation into alumino–silica UVM-7 material. By a proper adjustment of the synthesis parameters, furfuryl alcohol volume vs . template pore volume, it was possible to obtain a carbonaceous templated material which keeps the hierarchical bimodal porosity of the silica together with its high surface area (>1000 m 2 /g), as it was confirmed by means of electron transmission microscopy and N 2 adsorption isotherms. This carbon material was evaluated by testing it as a sorbent for several pesticides in aqueous solutions. Its absorption efficiency was compared with typical c…
Performances and morphology of polyamide/carbonaceous structures based fibers
2014
In this work the influence of carbonaceous particles with different particle sizes and shapes on the morphology and mechanical performances of polyamide (PA) based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (MWCNT). The different morphologies of the particles control their dispersion and their alignment in PA fibers upon elongational flow action and play a key role in structure-property relationships.
Polyamide/carbonaceous particles nanocomposites fibers: Morphology and performances
2015
In this work, the influence of carbonaceous particles with different sizes and shapes on the morphology and mechanical performances of polyamide (PA)-based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (CNTs). The increments of the complex viscosity as well as elastic and loss moduli, in the melt state, assessed by rheological analysis, are reduced by modifying polyamide (PA) matrix with nanofillers in a following order: CNTs > GNP > CB. All the nanocomposites, however, show viscosity and moduli higher than those of neat PA. The CB loading causes a mere increase of the vi…
Electrical transport in carbon black-epoxy resin composites at different temperatures
2013
Citation: J. Appl. Phys. 114, 033707 (2013); doi: 10.1063/1.4815870 (Received 3 May 2013; accepted 27 June 2013; published online 17 July 2013) Results of broadband electric/dielectric properties of different surface area—carbon black/epoxy resin composites above the percolation threshold are reported in a wide temperature range (25–500 K). At higher temperatures (above 400 K), the electrical conductivity of composites is governed by electrical transport in polymer matrix and current carriers tunneling from carbon black clusters to polymer matrix. The activation energy of such processes decreases when the carrier concentration increases, i.e., with the increase of carbon black concentration…