Search results for "coating"
showing 10 items of 2834 documents
Analysis of a GC/MS Thermal Desorption System with Simultaneous Sniffing for Determination of Off-Odor Compounds and VOCs in Fumes Formed during Extr…
2001
A thermal desorption equipment introducing volatile organic compounds (VOCs) into the gas chromatographic/ mass spectrometric system (GC/MS) with simultaneous sniffing (SNIFF) is a suitable method for identifying the volatile organic off-odor compounds formed during the extrusion coating process of low-density polyethylene. Fumes emitted during the extrusion coating process of three different plastic materials were collected at two different temperatures (285 and 315 degrees C) from an outgoing pipe and near an extruder. The VOCs of fumes were analyzed by drawing a known volume of air through the adsorbent tube filled with a solid adsorbent (Tenax GR). The air samples were analyzed by using…
Fresh-Cut Mangoes: How to Increase Shelf Life by Using Neem Oil Edible Coating
2022
The mango is the most widely cultivated tropical fruit. Fresh-cut mango is very useful, but it is very perishable. The purpose of this study was to highlight the effects of neem oil on fresh-cut mango fruits kept for 9 days at 4 ± 1 °C and 80 ± 5% relative humidity. The neem plant (Azadirachta indica) has numerous antioxidant and antibacterial properties. Despite this, very few studies have been carried out on neem oil added to edible coatings (EC) to retard ripening processes. Two formulations were tested: EC1 (hydroxypropyl methylcellulose + CaCl2) and EC2 (hydroxypropyl methylcellulose + CaCl2 + neem oil), both compared with an untreated sample (control). Physicochemica…
Influence of the process parameters on the microstructure of a hardfacing coating elaborated by hot isostatic pressing
2019
Hot Isostatic Pressing elaboration of Norem02, an austenitic-ferritic hypereutectoid stainless steel, leads to the formation ofan austenitic matrix with a mixture of acicular M7C 3 and globular M23 C 6 carbides. The sintering tests, carried out by using an AISI304L container, showed that the final microstructure and the carbides’ distribution of the HIPed Norem02 are strongly influencedby the process parameters (heating and cooling rate, sintering time, holding temperature and pressure) and by the particles’ size,microstructure and phase distribution of the initial powder. The morphological, crystallographic and chemical analysis of the sinteredsamples were completed by comprehension of the…
Superconducting tunnel junction fabrication on three-dimensional topography based on direct laser writing
2020
Superconducting junctions are widely used in a multitude of applications ranging from quantum information science and sensing to solidstate cooling. Traditionally, such devices must be fabricated on flat substrates using standard lithographic techniques. In this study, we demonstrate a highly versatile method that allows for superconducting junctions to be fabricated on a more complex topography. It is based on maskless direct laser writing and two-photon lithography, which allows writing in 3D space. We show that high-quality normal metal–insulator–superconductor tunnel junctions can be fabricated on top of a 20-lm-tall three-dimensional topography. Combined with conformal resist coating m…
Review article: recommended reading list of early publications on atomic layer deposition - outcome of the "virtual Project on the History of ALD"
2017
Atomic layer deposition (ALD), a gas-phase thin film deposition technique based on repeated, self-terminating gas-solid reactions, has become the method of choice in semiconductor manufacturing and many other technological areas for depositing thin conformal inorganic material layers for various applications. ALD has been discovered and developed independently, at least twice, under different names: atomic layer epitaxy (ALE) and molecular layering. ALE, dating back to 1974 in Finland, has been commonly known as the origin of ALD, while work done since the 1960s in the Soviet Union under the name "molecular layering" (and sometimes other names) has remained much less known. The virtual proj…
A fluorescence study of the loading and time stability of doxorubicin in sodium cholate/PEO-PPO-PEO triblock copolymer mixed micelles
2019
Abstract Hypothesis Doxorubicin hydrochloride (DX) is one of the most powerful anticancer agents though its clinical use is impaired by severe undesired side effects. DX encapsulation in nanocarrier systems has been introduced as a mean to reduce its toxicity. Micelles of the nonionic triblock copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) (PEO-PPO-PEO), are very promising carrier systems. The positive charge of DX confines the drug to the hydrophilic corona region of the micelles. The use of mixed micelles of PEO-PPO-PEO copolymers and a negatively charged bile salt should favour the solubilization of DX in the apolar core region of the micelles. Experiments We st…
Extraordinary Performance of Carbon‐Coated Anatase TiO 2 as Sodium‐Ion Anode
2015
The synthesis of in situ polymer‐functionalized anatase TiO2 particles using an anchoring block copolymer with hydroxamate as coordinating species is reported, which yields nanoparticles (≈11 nm) in multigram scale. Thermal annealing converts the polymer brushes into a uniform and homogeneous carbon coating as proven by high resolution transmission electron microscopy and Raman spectroscopy. The strong impact of particle size as well as carbon coating on the electrochemical performance of anatase TiO2 is demonstrated. Downsizing the particles leads to higher reversible uptake/release of sodium cations per formula unit TiO2 (e.g., 0.72 eq. Na+ (11 nm) vs only 0.56 eq. Na+ (40 nm)) while the …
Structure and dielectric breakdown strength of nano calcium carbonate/polypropylene composites
2013
Nanodielectrics, a 21st-century phenomena, is envisioned to be the answer for material challenges in progressive high-voltage technology. It is well known that the proper dispersion of nanoparticles plays a key role in improving the dielectric properties of a material, but to understand where changes in the properties of a material originate, it is also essential to reveal the multiscale structure of the material. In this study, the dielectric permittivity, breakdown strength, and structure of nano calcium carbonate (nano-CaCO3)/polypropylene composites with 1.8-8.1 wt % doping were characterized systematically. The combined results from transmission electron microscopy, Raman microscopy, a…
BODIPY atropisomer interconversion, face discrimination, and superstructure appending
2016
International audience; A strategy was developed to append sterically hindered apical pickets on both faces of the BODIPY platform to prevent stacking and aggregation. Ortho-substitution of both the meso-phenyl ring and the boron-bound catechol affords the right directionality to append pickets, achieve face discrimination, featuring two inter-convertible atropisomers, and is reminiscent of the picket-fence strategy in porphyrins.
Spin caloric transport from density-functional theory
2019
Spin caloric transport refers to the coupling of heat with spin transport. Its applications primarily concern the generation of spin currents and control of magnetisation by temperature gradients for information technology, known by the synonym spin caloritronics. Within the framework of ab initio theory, new tools are being developed to provide an additional understanding of these phenomena in realistic materials, accounting for the complexity of the electronic structure without adjustable parameters. Here, we review this progress, summarising the principles of the density-functional-based approaches in the field and presenting a number of application highlights. Our discussion includes th…