Search results for "composite"
showing 10 items of 4584 documents
Radiation-induced defects in fluorine-doped silica-based optical fibers: Influence of a pre-loading with H2
2009
International audience; We investigated the effects of 10-keV X-ray radiation on the transmission properties of F-doped optical fibers in the 200–850 nm range of wavelengths (1.5–6 eV). We also studied the influence of pre-loading this kind of fibers with hydrogen on its radiation sensitivity. Our results showed that, for our experimental conditions (pre-treatment with H2 several months before irradiation with diffusion of all the H2 out the fiber core and cladding before X-ray exposure), this pre-treatment increases the radiation-induced attenuation in the ultraviolet part (200–300 nm) of the spectrum. A previous H2-loading has no influence at greater wavelengths. The nature of the radiati…
Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray
2020
Abstract Besides the intrinsic low heat transfer capability of material, the thermal insulation property of thermal barrier coatings (TBCs) also relies on their microstructures. For better understanding the relationship between process parameters, porous architecture, and thermal properties of coatings, YSZ coatings were firstly manufactured by suspension plasma spray (SPS). Afterwards their total porosities were characterized by using the technique of X-ray transmission, the nano/submicro pores in those coatings were detected with Ultra-Small Angle X-ray Scattering (USAXS), and the thermal properties of coatings were measured using the laser flash method. The results indicated that: i) the…
Variability of pesticide mineralization in individual soil aggregates of millimeter size
2002
The aim of this study was to compare the 2,4-D mineralization in individual aggregates of millimeter size (3 size classes and 96 aggregates per size class). 14 CO 2 coming from the mineralization of 14 C ring-labeled 2,4-D and evolved by each aggregate incubated in microtiter plates was trapped with barium hydroxide on filters and measured using a Phosphorimager. We observed an important variability of mineralization in aggregates of each size class and in the different size classes of aggregates. The main factors responsible for these fluctuations could be a heterogeneous distribution of degrading microorganisms or of available carbon necessary for cometabolism.
De sages compositeurs. Budgets, enquêtes et trajectoires sociales au milieu du XIXe siècle
2012
International audience
Un compositeur pour l'écran, Paul Misraki et la musique de films
2018
International audience
Dielectric properties of graphite-based epoxy composites
2014
International audience; Composite materials based on epoxy resin filled with various kinds of graphite particles: exfoliated graphite, natural graphite, and coarse, medium and fine artificial graphites have been prepared. Results of broadband dielectric investigations of such materials in wide temperature (25-450 K) and frequency (20 Hz-3 THz) ranges are presented. The dielectric permittivity strongly increases with graphite particle size. The graphite particle size and shape also have a strong impact on freezing temperature, conductivity activation energy and composite electromagnetic absorption properties at room temperature. The lowest percolation threshold is observed for exfoliated gra…
Manufacturing and characterization of Al matrix composites with nano reinforcements via cold spraying
2019
This study aims at developing new routes for manufacturing Al matrix composites (AMCs) strengthened with nano reinforcements by solid-state cold spraying (CS) process. Three different AMCs including CNTs/Al, TiB2/AlSi10Mg and TiB2/7075Al were successfully fabricated by CS of the composite powders prepared using different approaches. The microstructure evolution of as-sprayed composite samples was investigated by means of different characterization methods like X-ray diffraction (XRD), scanning (SEM) and transmission electron microscopy (TEM) and electron backscatter diffraction (SEM/EBSD). The adhesion strength, tribological behaviour, corrosion properties as well as the mechanical performa…
Modélisation numérique d'assemblages collés : application à la réparation de structures en composites
2013
This study is one part of a program of research with regard to the repair of composite structure with extern bonded-patches. The principal objectives of this program are, on one side, the identification of all the factors susceptible to influence the long-term performance of this type of repair, on the other, to determine the extent to which the use of such assemblage can be proved to be an optimal solution. The conception of such a system needs essentially the development of a tool of simulation and of robust prediction because various mechanisms of damage can take place in a very complex way and the final fracture of the system arise from the propagation of damage zones. This study consis…
Study of fatigue behavior of plant fiber reinforced composites : taking into account the variability of properties
2012
The present study focuses on the characterization and comparison of the quasi-static and fatigue properties of flax and glass fibre reinforced composites with an epoxy matrix. An extensive experimental campaign of fatigue tests have been performed using the measured quasi-static tension and in plane-shear properties. It appears that the static and fatigue characteristics of the glass/epoxy composites are higher than that of flax/epoxy ones with similar fibre volume fraction and lay-ups. However, due to the low density of flax reinforcements, the differences between the specific properties of the two materials are low. The measurement of the evolution of the fatigue properties has highlighte…
MULTI AXIAL TESTING OF ADHESIVELY BONDEDJOINTS OF FIBER REINFORCED THERMOPLASTIC POLYMERS
2015
International audience; In order to predict the mechanical behaviorof adhesively bonded joints, it is necessary to develop robust numerical models.This robustness is only reached if an extensive experimental database with tensile, shear and complex combined peel and shear loads can beestablished. The purpose of this study is to present a multi axialdevice for testing adhesively bonded joints, using KS2-type specimens traditionally utilized for spot-weld characterization. The tests were conducted on a glass fiber reinforced thermoplastic polymer(PA6-6) composite adhesively bonded with a flexible polyurethane adhesive. This adhesive/substrate combination allowsshort process times and good per…