Search results for "conductivity"
showing 10 items of 1988 documents
A new intermediate intercalate in superconducting sodium-doped hafnium nitride chloride
2005
Anew phase has been observed during the sodiumintercalation of hafnium nitride chloride as intermediate between the host β-HfNCl and the already reported Na 0.29 HfNCl with Tc of 24 K; the new intermediate shows interlayer spacings ranging from 9.48 to 9.67 A°, corresponds to a second stage intercalate of HfNCl and is superconducting with a critical temperature of 20 K. Beltran Porter, Daniel, Daniel.Beltran@uv.es
Electrochemical treatment of real wastewater. Part 1: Effluents with low conductivity
2018
Abstract The treatment of a real wastewater characterized by low conductivity was performed by anodic oxidation at boron doped diamond (BDD) in both conventional and microfluidic cells. The electrolyses carried out in conventional cells without supporting electrolyte were characterized by very high TOC removals but excessively high energetic consumptions and operating costs. The addition of sodium sulphate, as supporting electrolyte, allowed to strongly reduce the cell potentials and consequently the energetic consumptions and the operating costs. However, under various operating conditions, the addition of Na2SO4 caused a lower removal of the TOC. The best results in terms of both TOC remo…
Solid polymer electrolytes from a fluorinated copolymer bearing cyclic carbonate pendant groups
2018
International audience; A poly(vinylidene fluoride-co-(2-oxo-1,3-dioxolan-4-yl)methyl 2-(trifluoromethyl)acrylate) random copolymer, poly(VDF-co-MAF-cyCB), with a MAF-cyCB weight fraction of 59% was synthesized via free radical copolymerization of VDF and MAF-cyCB, which is a methacrylate bearing cyclocarbonate side-chain. This copolymer showed nano-structured morphology, where crystalline PVDF-rich domains co-existed with amorphous poly(VDF-co-MAF-cyCB) segments. Solid polymer electrolytes were further obtained by loading the poly(VDF-co-MAF-cyCB) copolymer with various amounts of LiClO4. The added lithium salt was dissolved in the poly(VDF-co-MAF-cyCB) amorphous phase, which allowed the f…
Ionic Liquid Composite Polybenzimidazol Membranes for High Temperature PEMFC Applications
2019
A series of proton exchange membranes based on polybenzimidazole (PBI) were prepared using the low cost ionic liquids (ILs) derived from 1-butyl-3-methylimidazolium (BMIM) bearing different anions as conductive fillers in the polymeric matrix with the aim of enhancing the proton conductivity of PBI membranes. The composite membranes prepared by casting method (containing 5 wt. % of IL) exhibited good thermal, dimensional, mechanical, and oxidative stability for fuel cell applications. The effects of anion, temperature on the proton conductivity of phosphoric acid-doped membranes were systematically investigated by electrochemical impedance spectroscopy. The PBI composite membranes containin…
Heat transport of helium II in restricted geometries
1979
The linear heat transport of helium II contained in porous powder samples with mean pore diameters of 1.25µm, 0.17µm and 0.02µm was systematically studied in the temperature range between 0.8 K and 2 K. The effective thermal conductivity was determined by steady-state heat flow measurements and the effective thermal diffusivity by transitory temperature measurements. The experimental results are interpreted by a simple theoretical model. In the framework of this model the linear heat transport consists of two contributions: the laminar flow of the normal fluid (T≳1.4 K) and a diffusion mechanism (T≲1.4 K). At low temperatures (T≲1.2 K) the mean free paths of the elementary excitations of he…
Temperature Measurements as a Method for Monitoring Ropes
2020
Due to an increasing demand for operation at sea depths as low as 3000 m and under, the use of fibre ropes for offshore application in deep sea lifting and mooring is increasing. Consequently, improved knowledge is required regarding these ropes’ thermo-mechanical properties and how these properties change as the rope is being used. This paper presents a 2D model of heat transport in the axial and radial directions along a 28 mm diameter fibre rope typically used for offshore applications. The model is combined with temperature measurements during heating and cooling of the rope, using both thermocouples and a thermal camera. Measurements are performed both on a new rope and on a used that …
First-principles study of elastic and thermal properties of scheelite-type molybdates and tungstates
2020
Abstract First-principles calculations are carried out to study the physical properties of scheelite-type AMoO4 molybdates and AWO4 tungstates (A = Ca, Sr, Ba, and Pb). We consider two flavors for the exchange-correlation functional, the local-density approximation (LDA) and the generalized gradient approximation (GGA). The second-order elastic constants were determined, and we found that c11 is larger than c33 for the eight investigated compounds. This fact is consistent with the well-known anisotropic compressibility of scheelite-type molybdates and tungstates. The calculated elastic constants are used to determine macroscopic properties which are relevant for applications, such as the bu…
Changes in structure and conduction type upon addition of Ir to ZnO thin films
2017
Zn-Ir-O (Zn/Ir ≈ 1/1) thin films have been reported to be a potential p-type TCO material. It is, however, unknown whether it is possible to achieve p-type conductivity at low Ir content, and how the type and the magnitude of conductivity are affected by the film structure. To investigate the changes in properties taking place at low and moderate Ir content, this study focuses on the structure, electrical and optical properties of ZnO:Ir films with iridium concentration varying between 0.0 and 16.4 at.%. ZnO:Ir thin films were deposited on glass, Si, and Ti substrates by DC reactive magnetron co-sputtering at room temperature. Low Ir content (up to 5.1 at.%) films contain both a nano-crysta…
Anisotropic and non-heterogeneous continuum percolation in titanium oxynitride thin columnar films
2002
International audience; We report the percolation behaviour of the conductivity of titanium oxynitride films grown by low-pressure metal-organic chemical vapour deposition, composed of TiNxOy mixed with TiO2. The usual DC parameters (t, s and Φc), obtained from the effective media theory equations, are compared to the universal values (s = sun while t < tun because of the film anisotropy). This is the first example of an electrical continuum percolation applied to columnar films with chemically similar conducting and insulating units (non-heterogeneous percolation) whose mixing is based upon the growth temperature during the film growth.
Stable n-type thermoelectric multilayer thin films with high power factor from carbonaceous nanofillers
2016
Abstract High power factor n-type organic thermoelectric nanocomposites are assembled by alternately depositing double walled-nanotubes (DWNT), stabilized by polyethyleneimine (PEI), and graphene stabilized by polyvinylpyrrolidone (PVP), from water using the layer-by-layer (LbL) assembly technique. This unique combination of carbon nanomaterials exhibits an electrical conductivity of 300 S cm−1 and a relatively stable power factor of 190 μW m−1 K−2 at room temperature.