Search results for "cost"
showing 10 items of 5421 documents
A flexible robotic cell for in-process inspection of multi-pass welds
2020
Welds are currently only inspected after all the passes are complete and after allowing sufficient time for any hydrogen cracking to develop, typically over several days. Any defects introduced between passes are therefore unreported until fully buried, greatly complicating rework and also delaying early corrections to the weld process parameters. In-process inspection can provide early intervention but involves many challenges, including operation at high temperatures with significant gradients affecting acoustic velocities and, hence, beam directions. Reflections from the incomplete parts of the weld would also be flagged as lack-of-fusion defects, requiring the region of interest (ROI) t…
Evaluation of Coded Excitations for Autonomous Airborne Ultrasonic Inspection
2019
Unmanned Aerial Vehicles (UAVs) are receiving increasing attention for use in Non-Destructive Testing due to their ability to access areas where manual inspection is not practical. Contact-based UAV ultrasonic inspections grant the opportunity to remotely monitor the structural health of an industrial asset with enhanced internal integrity information. Ultrasonic inspection is a Non-Destructive Testing (NDT) method conventionally used in corrosion mapping. Surface contacting ultrasonic transducers provide enhanced structural integrity information. However, due to near-surface aerodynamic effects, angular sensitivity of the ultrasound probe and alignment error during autonomous inspections, …
Strategies of Identification of a Base-Isolated Hospital Building by Coupled Quasi-Static and Snap-Back Tests
2020
In this paper, the description of a series of quasi-static pushing tests and dynamic snap-back tests is proposed, involving the base-isolated emergency building of the Palermo university hospital. The base isolation system is characterized by a set of double-curved friction pendulum isolators placed on the top of the columns of the underground level, characteristics that cannot be found in the experimental studies available in the literature. The aim of the work was to investigate the static and dynamic properties of the building in question and comparing the in-situ results with the characteristics assigned during the design process and to assess the level of agreement. Static lateral push…
The organization of the defense support system: an economic geography perspective
2017
In the context of restricted budgetary resources and the growing cost of maintenance, repair, and overhaul (MRO) activities, a major issue for modern armed forces is to sustain defense platforms. A possible method consists of realizing economies of scale through the concentration of maintenance activities, which involves the spatial reorganization of existing industrial sites dedicated to MRO. This article provides a formalized framework to discuss the optimal organization for the MRO of defense platforms in space. The public planner organizes the maintenance of defense platforms with only two possible spatial configurations. In the dispersed configuration, two industrial production units i…
Modelling load-transmission mechanisms in axially loaded RC columns retrofitted with steel jackets
2018
The use of steel jacketing technique is a common practice for retrofitting existing reinforced concrete (RC) columns, as it allows increasing load-carrying capacity and ductility of the member. When the external jacket has no-end connections – i.e. the jacket is indirectly loaded- the load sustained by the column is transferred from the inner RC core to the external jacket through shear stresses along the contact surface. The assessment of this mechanism is quite complex, due to the marked non-linear behaviour of constituent materials and to the calibration of a proper shear stress-relative slip constitutive law of the concrete-to-steel interface. In this paper, a step-by-step analytical ap…
Seismic behavior of structures equipped with variable friction dissipative (VFD) systems
2021
Usually, to mitigate the stresses in framed structures, different strategies are used. Among them, base isolation, viscous/friction/metallic yielding dampers and tuned mass dumpers have been widely investigated. Fluid Viscous Dampers (FVD) probably result the most diffused for the simplicity in the applications. However, these type of dampers request limited interstorey drifts to avoid dangerous effects. Further, they have an elevate cost. On the contrary, friction dampers are not so expensive but request high interstorey drifts to give a significant contribute in the dissipation of energy during an earthquake. In this paper an approach for the energy dissipation by friction, modified with …
Identification of circumferential regional heterogeneity of ascending thoracic aneurysmal aorta by biaxial mechanical testing
2019
Abstract Ascending thoracic aortic aneurysm (ATAA) in patients with bicuspid aortic valve (BAV) can present an asymmetrical aortic dilatation compared with patients with tricuspid aortic valve (TAV). This pattern of aneurysm dilatation led us to hypothesize that biomechanical differences likely induced by regional heterogeneity of material properties can underlie the observed asymmetric enlargement discrepancies between BAV ATAA and TAV ATAA. This study aimed to characterize the mechanical properties and associated aortic tissue stiffness changes along the circumferential direction of aortic rings collected from surgically-repaired patients with ATAA. Biaxial material testing was performed …
Low-Cost Optical Mapping Systems for Panoramic Imaging of Complex Arrhythmias and Drug-Action in Translational Heart Models.
2017
[EN] Panoramic optical mapping is the primary method for imaging electrophysiological activity from the entire outer surface of Langendorff-perfused hearts. To date, it is the only method of simultaneously measuring multiple key electrophysiological parameters, such as transmembrane voltage and intracellular free calcium, at high spatial and temporal resolution. Despite the impact it has already had on the fields of cardiac arrhythmias and whole-heart computational modeling, present-day system designs precludes its adoption by the broader cardiovascular research community because of their high costs. Taking advantage of recent technological advances, we developed and validated low-cost opti…
Bifidobacterium CECT 7765 modulates early stress-induced immune, neuroendocrine and behavioral alterations in mice.
2016
Emerging evidence suggests that there is a window of opportunity within the early developmental period, when microbiota-based interventions could play a major role in modulating the gut-brain axis and, thereby, in preventing mood disorders. This study aims at evaluating the effects and mode of action of Bifidobacterium pseudocatenulatum CECT 7765 in a murine model of chronic stress induced by maternal separation (MS). C57Bl/6J male breast-fed pups were divided into four groups, which were subjected or not to MS and supplemented with placebo or B. pseudocatenulatum CECT7765 until postnatal period (P) 21 and followed-up until P41. Behavioral tests were performed and neuroendocrine parameters …
Self-adjuvanting C18 lipid vinil sulfone-PP2A vaccine: study of the induced immunomodulation against Trichuris muris infection
2017
Despite the importance of the adjuvant in the immunization process, very few adjuvants merge with the antigens in vaccines. A synthetic self-adjuvant oleic-vinyl sulfone (OVS) linked to the catalytic region of recombinant serine/threonine phosphatase 2A from the nematode Angiostrongylus costaricensis (rPP2A) was used for intranasal immunization in mice previously infected with Trichuris muris . The animal intranasal immunization with rPP2A-OVS showed a reduction of 99.01% in the number of the nematode eggs and 97.90% in adult. The immunohistochemical analysis of the intestinal sections showed that in immunized animals with lipopeptide the mucus was significantly higher than in the other ex…