Search results for "current"
showing 10 items of 2224 documents
Trilateral π-conjugation extensions of phenothiazine-based dyes enhance the photovoltaic performance of the dye-sensitized solar cells
2016
Abstract Two novel organic dyes TLEP-1 and TLEP-2 based on phenothiazine with trilateral π-conjugation extensions were designed and synthesized for dye-sensitized solar cells, where phenothiazine ring was linked with two phenyl moieties at 7- and 10-positions as the first and second π-conjugation extensions, and with furan or thiophene ring at 3-position as the third π-conjugation extension for TLEP-1 and TLEP-2, respectively. The influence of the π-conjugation extensions on the photovoltaic performance was evaluated. The cell based on TLEP-2 exhibits an impressive short-circuit photocurrent density of 14.87 mA cm−2, which is much higher than the cell based on the reference dye without π-co…
Electron tunneling from colloidal CdSe quantum dots to ZnO nanowires studied by time-resolved luminescence and photoconductivity experiments
2015
CdSe quantum dots (QDs) with different organic linker molecules are attached to ZnO nanowires (NWs) to study the luminescence dynamics and the electron tunneling from the QDs to the nanowires in time-resolved photoluminescence (PL) and photoconductivity measurements. The PL transients of the QD luminescence indicate two different recombination channels: the direct recombination inside the QD core and the recombination via QD surface defect states. After linking the QDs to the ZnO NW surface, photo-induced electron tunneling from an excited state of the QD into the conduction band of the nanowire becomes visible by a clear decrease of the PL decay time. Efficient electron tunneling is confir…
Structural Analysis and Photocurrent Spectroscopy of CCCs on 99.99% Aluminum
2003
A characterization of chromate conversion coatings (CCCs) formed in the presence and in the absence of accelerator (ferroferricyanide redox couple) has been performed by various techniques (transmission electron microscopy, TEM, glow discharge optical emission spectrometry, GDOES, X-ray absorption near-end structure, XANES, and photon correlation spectroscopy). The results of a detailed investigation on morphological, compositional, and solid-state properties of freshly converted aluminum samples at different immersion times (30 s-90 min) are reported. The TEM and GDOES data suggest the presence of iron-cyanide species only in the external layer of CCC of nearly constant thickness. The XANE…
Photoconductivity of Germanium Nanowire Arrays Incorporated in Anodic Aluminum Oxide
2007
Photoconductivity of germanium nanowire arrays of 50 and 100 nm diameter incorporated into Anodic Aluminum Oxide (AAO) membranes illuminated with visible light is investigated. Photocurrent response to excitation radiation with time constants faster than 10−4 s were governed by absorption of incident light by nanowires, while photokinetics with time constants of the order of 10−3 s originates from the photoluminescence of the AAO matrix. Possible applications of nanowire arrays inside AAO as photoresistors are discussed.
The influence of surface treatment on the anodizing of magnesium in alkaline solution
2011
Abstract The mechanism of magnesium anodizing after mechanical polishing or HF pickling was studied. X-ray Photoelectron Spectroscopy and Photocurrent Spectroscopy were employed to characterize both the initial films formed on Mg soon after surface treatments and the anodic films grown in strongly alkaline solutions. Electrochemical and capacitance measurements were performed in order to study the oxidation process and to check if the kinetic of growth fits the Mott–Cabrera high field model. From Tafel plots it was possible to estimate the activation distance, while the simulation of the barrier layer growth as a function of the potential at high scan rate allowed to estimate the other kine…
Semiempirical Correlation between Optical Band Gap Values of Oxides and the Difference of Electronegativity of the Elements. Its Importance for a Qua…
1997
A semiempirical correlation between the optical band gap of binary oxides and the difference of electronegativity between the oxygen and metallic elements (Pauling's extraionic energy) is proposed. In the frame of the proposed correlation an estimate of the repulsive term in the total lattice energy of ionic oxides is obtained in very good agreement with the existing data. An extension of the correlation to the ternary oxides and hydroxides is proposed by using the concept of average cationic or anionic group electronegativity. The usefulness of the proposed correlation for the in situ characterization of passive films on metals and alloys by photocurrent spectroscopy is illustrated by repo…
Growth and Characterization of Anodic Films on Al-Nb Alloys
2006
Abstract The anodizing behaviours of sputtering-deposited aluminium, niobium and Al-Nb alloys, containing 0.4, 7.5, 21, 40 and 55 at.% niobium, have been examined in 0.1 M ammonium pentaborate electrolyte with interest in the morphology, structure and electronic properties of the anodic oxides. Transmission electron microscopy revealed amorphous oxides, containing units of Nb2O5 and Al2O3, with formation ratios intermediate between those of anodic alumina and anodic niobia. Photocurrent spectroscopy provided increased understanding of the electronic properties of the anodic films, suggesting the formation of “mixed oxides” with insulating behaviours. The estimated band gap values are correl…
Photo-electrochemical and impedance investigation of passive layers grown anodically on titanium alloys
2004
Abstract The anodic behaviour of two titanium cast alloys, obtained by fusion in a voltaic arc under argon atmosphere, was analyzed in aerated aqueous solutions having different pH values. In all solutions the alloys, having nominal compositions Ti–50Zr at.% and Ti–13Zr–13Nb wt.%, displayed a valve-metal behaviour, owing to the formation of barrier-type oxide films. Passive films, grown potentiodynamically up to about 9 V, were investigated by photocurrent spectroscopy (PCS) and electrochemical impedance spectroscopy (EIS). These passive layers show photoactivity under anodic polarizations, with optical gaps close to 3.55 and 3.25 eV for the binary and the ternary alloy, respectively, indep…
Influence of the crystallization process on the photoelectrochemical behaviour of anodic TiO2 films
1997
On the basis of kinetic and photoelectrochemical studies we show that the formation of amorphous or strongly disordered TiO2 films on electropolished titanium rods can occur upon anodization in 0.5 M H2SO4 solution in a range of thickness which depends on the anodization rate. This finding is confirmed both by the changes in the shape of the photocurrent vs. potential curves with the energy of the incident photons, and by the impedance behaviour of the junction. Our data indicate that TiO2 films having different degree of disorder are formed depending on the anodization rate and oxide thickness. Crystalline films are formed at very low growth rates since very low thicknesses. Amorphous or s…
The effect of thickness on the composition of passive films on a Ti–50Zr at% alloy
2006
Abstract Anodic films were grown potentiodynamically in different electrolytes (pH = 1–14) on a Ti–50Zr at% cast alloy, obtained by fusion in a voltaic arc under argon atmosphere. The thickness of the films was varied by changing formation potential from the open circuit potential up to about 9 V; growth was followed by 30 min stabilization at the forming potential. Films having different thicknesses were characterized by photocurrent spectroscopy (PCS) and electrochemical impedance spectroscopy (EIS). Moreover, film composition was analyzed by X-ray photoelectron spectroscopy (XPS). Regardless of the anodizing conditions, passive films on the Ti–50Zr at% alloy consist of a single layer mix…