Search results for "dynamics."
showing 10 items of 9637 documents
Friction Based Solid State Welding Processes
2012
In the last decade the industrial use of solid state welding processes based on frictional forces work decaying into heat is continuously increasing due to their strong advantages with respect to traditional fusion techniques. Several advances have been proposed by the scientific community regarding process mechanics, material flow and also the computer aided engineering of the operation with the aim to maximize the mechanical performances of the welded joints. In the paper Friction Stir Welding (FSW) and Linear Friction Welding (LFW) operations are considered and a review of the most relevant research issues and results is provided.
Outlining the Limits of Friction Stir Consolidation as Used as an Aluminum Alloys Recycling Approach
2021
Friction stir consolidation (FSC) is a solid-state process that recycles metal scraps economically and eco-friendly compared to the conventional melting method. The process parameters especially processing time and rotational speed, have a crucial role in achieving a sound disc during FSC. The current study answers the research question of how far these process parameters can be effective when the mass of chips to be recycled increases. In specific, an experimental setup was analyzed that was previously identified as challenging for recycling 20 g chips of aluminum alloy AA 2024-O. Rotational speed was set doubled, and processing time was increased up to 1.5 times of their initial values. T…
Impedance analysis of perovskite solar cells: a case study
2019
Metal halide perovskites are mixed electronic-ionic semiconductors with an extraordinary rich optoelectronic behavior and the capability to function very efficiently as active layers in solar cells, with a record efficiency surpassing 23% nowadays. In this work, we carry out an impedance spectroscopy analysis of two perovskite solar cells with quite distinct optical and electrical characteristics, i.e. MAPbI3 and CsPbBr3-based devices. The main aim of the analysis is to establish how, regardless the inherent complexity of the impedance spectrum due to ionic effects, information like ideality factors, recombination losses and the collection efficiency can be qualitative and quantitatively as…
Manipulation of nanoparticles of different shapes inside a scanning electron microscope
2014
In this work polyhedron-like gold and sphere-like silver nanoparticles (NPs) were manipulated on an oxidized Si substrate to study the dependence of the static friction and the contact area on the particle geometry. Measurements were performed inside a scanning electron microscope (SEM) that was equipped with a high-precision XYZ-nanomanipulator. To register the occurring forces a quartz tuning fork (QTF) with a glued sharp probe was used. Contact areas and static friction forces were calculated by using different models and compared with the experimentally measured force. The effect of NP morphology on the nanoscale friction is discussed.
Complex tribomechanical characterization of ZnO nanowires: nanomanipulations supported by FEM simulations
2016
In the present work, we demonstrate a novel approach to nanotribological measurements based on the bending manipulation of hexagonal ZnO nanowires (NWs) in an adjustable half-suspended configuration inside a scanning electron microscope. A pick-and-place manipulation technique was used to control the length of the adhered part of each suspended NW. Static and kinetic friction were found by a 'self-sensing' approach based on the strain profile of the elastically bent NW during manipulation and its Young's modulus, which was separately measured in a three-point bending test with an atomic force microscope. The calculation of static friction from the most bent state was completely reconsidered…
On the measurement of local gas hold-up, interfacial area and bubble size distribution in gas–liquid contactors via light sheet and image analysis: I…
2013
Abstract In this work a novel experimental technique for measuring local gas hold-up, interfacial area and bubble size distribution, in gas–liquid systems is proposed. The technique is based on advanced Image Processing coupled with experimental set-ups typically available for Particle Image Velocimetry. A fluorescent dye dissolved in the liquid phase allows to identify in-plane bubbles among all visible bubbles in the images. To this end, a suitable algorithm is proposed. The raw data so obtained are processed by previously developed statistical methods that result in a reliable reconstruction of actual dispersion properties. The technique is applied to the case of a gas-dispersed mechanic…
Temperature Coefficients of Compensated Silicon Solar Cells – Influence of Ingot Position and Blend-in-ratio
2015
Published version of an article in the journal: Energy Procedia. Also available on Science Direct: http://dx.doi.org/10.1016/j.egypro.2015.07.004 Solar-grade silicon made from a metallurgical route presents boron and phosphorus compensation. Earlier work has shown that cells made from such material produce more energy than reference polysilicon modules when the temperature and irradiance is high. In the present study, solar cells from two different ingots with different blend-in-ratios were made from wafers at varying ingot heights in order to investigate how the temperature coefficients vary with compensation level and ingot height. The results suggest that solar modules made with solar ce…
Temperature profiles of field-aged multicrystalline silicon photovoltaic modules affected by microcracks
2021
In this work, the temperature sensitivities of field-aged multicrystalline silicon PV modules affected by microcracks are investigated. It is found that the temperature coefficient of efficiency of all modules has increased more than 10 times over the 20 years period, mainly due to a degradation in the temperature coefficients of fill factor. Temperature coefficient of efficiency of PV modules affected by microcracks changed from -0.44 %/ °C to -1.51 %/°C under solar irradiance conditions at 1010 - 1030 W/m2. Inconsistent values for the Evans–Floschuetz efficiency ratio versus temperature plots for the microcrack affected modules were also observed.
Kinetics of block-copolymer aggregation in super critical CO2
2002
Small angle X-ray and neutron scattering (SAXS and SANS) are used to obtain structural information on the aggregation behavior of block-copolymers dissolved in supercritical CO2. The SANS technique is used to provide a detailed structural model for the micellar aggregates, which form below the critical micellization density (CMD), that we defined in our previous work. The SAXS technique (with a synchrotron source) is used to provide the first experimental information concerning the kinetic features of both formation and decomposition of such aggregates as soon as pressure jumps are applied to the solutions across the CMD. 2002 Elsevier Science B.V. All rights reserved.
Magnetic Ion Exchange Interactions in NiO—MgO Solid Solutions
2006
In this work, a review of recent experimental data and their interpretation for NicMg1−c O solid solutions is given. In particular, the influence of exchange interactions between Ni2+ ions on the structural, optical, magnetic, and vibrational properties is discussed.