Search results for "elastomer"
showing 10 items of 134 documents
Monodomain Liquid Crystal Main Chain Elastomers by Photocrosslinking
2007
A new synthetic strategy for the preparation of macroscopically oriented smectic main chain liquid crystal elastomers (MC-LCE) by the photocrosslinking of laterally functionalized polyesters is presented. X-ray measurements proved the formation of the monodomain and allowed a quantitative determination of the order parameter. The thermo-actuation of our material at the phase transition from the liquid-crystalline to the isotropic phase was demonstrated by temperature dependent measurements of the sample length, showing a fully reversible shape change of � 40%. Mechanical measurements showed that the sample can be stretched by up to 60% along the smectic layer normal without any reorientatio…
Nanosized shape-changing colloids from liquid crystalline elastomers.
2010
A method to prepare shape-changing nanospheres from liquid crystalline elastomers is reported. The nanosized colloids are prepared by a miniemulsion process. During this process, colloids are prepared from a liquid crystalline (LC) main-chain polyester and subsequently crosslinked into a nanometer-sized LC elastomer. The ability of these LC elastomers to change their shape at the phase transition temperature from the smectic A to the isotropic phase was detected by temperature-dependent transmission electron microscopy. The phase transition-induced shape change leads to strongly shape anisotropic nanosized elastomer particles.
Microactuators from a main-chain liquid crystalline elastomer via thiol–ene “click” chemistry
2013
Recently it has been described that liquid crystalline elastomer (LCE) particles of the side-chain type can be prepared in microfluidic devices. Here we present the preparation of micrometer-sized LCE particles of the main-chain type by thiol–ene chemistry. The LCE particles are UV-crosslinked via thiol–ene click chemistry of the nematic monomer, carrying terminal thiol and ene groups, and non-mesogenic tetrathiol and tetraene crosslinkers. The preparation of the LCE particles with a microfluidic device by a continuous “on the fly” technique allows their fast processing with an irradiation time of less than 2 seconds. The resulting particles undergo a temperature-driven volume change up to …
An insight into the interaction between functionalized thermoplastic elastomer and layered double hydroxides through rheological investigations
2018
Abstract Nanocomposites based on maleated poly(styrene-(ethylene-co-butylene)-styrene) copolymer (SEBSgMA) and organo-modified layered double hydroxide (OLDH) have been formulated with the aim to investigate the effects of interfacial interactions between the grafted maleic anhydride groups of the copolymer and the OLDH nanolayers on the rheological properties of nanocomposites. The spectroscopic analysis indicates the establishment of specific polymer/nanofiller interactions, whose extent has been highlighted through morphological and rheological investigations. Specifically, oscillatory melt rheology and shear relaxation tests have been considered in order to deeply investigate the interf…
Ferroelectric Liquid Crystalline Elastomers
2002
Ferroelectric LC-elastomers represent an interesting class of material because they combine the ordering of liquid crystalline ferroelectric phases and the rubber elasticity of polymer networks. Switching of the electric polarization leads to deformation of the polymer network, equivalent to stretching a spring, and creates a stress in the network of polymer chains. The interaction of mesogens and the network can be varied by using different topologies of net points: Crosslinking is carried out either within the siloxane sublayers (leading to fast switching elastomers) or between the siloxane sublayers (resulting in an elastomer that favors the ferroelectric switching state in which the cro…
Finely tuned nickel complexes as highly active catalysts affording branched polyethylene of high molecular weight: 1-(2,6-Dibenzhydryl-4- methoxyphen…
2018
Abstract A series of unsymmetrical 1,2-bis(imino)acenaphthenenickel(II) halides containing N-2,6-dibenzhydryl-4-methoxyphenyl – a single bulky group with adjusted electron donating properties – has been synthesized and characterized. These compounds adopt distorted tetrahedral geometry and their 1H NMR spectra show the paramagnetically shifted peaks. On activation with a low amount of Et2AlCl or ethylaluminum sesquichloride (EASC), these nickel complexes display high activity in ethylene polymerization, yielding the polyethylene of high molecular weight. They are also stable at elevated temperature; superb activity of 2.51 × 106 g of PE (mol of Ni)−1 h−1 can be attained at 90 °C. The result…
Thermal and Mechanical Properties of Unvulcanized Polypropylene Blends with Different Elastomers: Ethylene-Propylene-Diene Terpolymer, Nitrile-Butadi…
2013
In this work, composites of isotactic polypropylene (PP) with three unvulcanized elastomers – terpolymer of ethylene-propylene-dicyclopentadiene (EPDM), chlorinated polyethylene (CPE) and copolymer of acrylonitrile-butadiene (NBR) – have been investigated. The purpose of the investigation was to create PP/elastomer blend composites of significantly different compositions (with an excess of PP, intermediate ones, and with an excess of elastomer) and to study the dependence of tensile behaviour and elastic properties on the blends with different component ratio. Tensile properties have been recognized from the stress-strain curves. The changes of elastic modulus have been characterized with r…
Thermoanalytical study of nucleating effects in polypropylene composites
1996
Interfacial structure plays an important role in the performance of polypropylene composites. Transcrystalline interfacial layer were determined in talc filled polypropylene. The crystallization and melting behaviour of talc and CaCC3 filled polypropylene could be modified with smaller amount of additives like elastomer and surfactants. Through the effect of these additives the structure of interface and the degree of crystallinity could be controlled in filled polypropylene.
Recycling of inside upholstery of end-of-life cars
2005
A model study for the recycling of the interior upholstery plastic parts of end-of-life cars has been carried out by reprocessing the homogenized scraps of an upholstery farm in the presence of different compatibilizer precursors, such as an ethylene-glycidylmethacrylate copolymer (EGMA), a maleic anhydride functionalized thermoplastic elastomer (SEBS-MA), etc. The investigated scraps contained recycled polyethylene (from agricultural uses) and poly(ethylene terephthalate), as the main components, plus minor proportions of polypropylene, polyamide-6, and other additives, including an ethylene copolymer (EC), probably an ethylene-acrylic acid copolymer, which is used to compatibilize the car…
Synthesis and characterization of redox-sensitive polyurethanes based on L-glutathione oxidized and poly(ether ester) triblock copolymers
2021
Abstract Segmented polyurethanes, based on PCL-PEG-PCL copolymers, 1,4-diisocyanatobutane and l -glutathione oxidized, used as chain extender, were synthetized. Three different reactions conditions were investigated using three different copolymers having ɛ-CL/polyethylene glycol molar ratios equal to 12, 24 and 36 and three different reaction conditions. As investigated by size exclusion chromatography analyses and quantification of l -glutathione, the polymerization and the extension phase's efficiency depended on the ɛ-CL/PEG ratio and the extension phase's operating temperature. Three selected polyurethanes were characterized by spectroscopic, differential scanning calorimetry (DSC) and…