Search results for "electric energy"

showing 10 items of 35 documents

A Novel Solution for the Elimination of Mode Switching in Pump-Controlled Single-Rod Cylinders

2020

This paper concerns the stability issue of pump-controlled single-rod cylinders, known as mode switching. First, a review of the topic is provided. Thereafter, the most recently proposed solution for the elimination of mode switching is investigated and shown to result in unstable behavior under certain operating conditions. A theoretical analysis is provided demonstrating the underlying mechanisms of this behavior. Based on the analysis, a novel control strategy is proposed and investigated numerically. Proper operation and stability are demonstrated for a wide range of operating conditions, including situations under which the most recently proposed solution results in unstable behavior a…

0209 industrial biotechnologyControl and OptimizationMaterials science020209 energy02 engineering and technologyelectrohydraulic valvesStability (probability)020901 industrial engineering & automationlinear actuatorsControl theorylcsh:TK1001-18410202 electrical engineering electronic engineering information engineeringlcsh:TA401-492large inertia loadsLinear actuatorstabilitylcsh:Production of electric energy or power. Powerplants. Central stationsRange (mathematics)VDP::Teknologi: 500single-pump circuitsmode switching instabilityControl and Systems EngineeringoscillationsMode switchinglcsh:Materials of engineering and construction. Mechanics of materialsActuatorpump-controlled systemsActuators
researchProduct

Towards a microbial thermoelectric cell.

2013

Microbial growth is an exothermic process. Biotechnological industries produce large amounts of heat, usually considered an undesirable by-product. In this work, we report the construction and characterization of the first microbial thermoelectric cell (MTC), in which the metabolic heat produced by a thermally insulated microbial culture is partially converted into electricity through a thermoelectric device optimized for low ΔT values. A temperature of 41°C and net electric voltage of around 250–600 mV was achieved with 1.7 L baker’s yeast culture. This is the first time microbial metabolic energy has been converted into electricity with an ad hoc thermoelectric device. These results might…

Anatomy and PhysiologyBioelectric Energy SourcesExothermic processlcsh:MedicineSaccharomyces cerevisiaeBacterial growthEthanol fermentationMicrobiologyIndustrial MicrobiologyEngineeringElectricityIndustrial EngineeringThermoelectric effectBioenergyAerobic digestionProcess engineeringlcsh:ScienceBiologyMicrobial MetabolismMultidisciplinarybusiness.industryChemistrylcsh:RTemperatureMicrobial Growth and DevelopmentBiotechnologyEnergy and PowerProcess EngineeringBiofuelBiofuelsFermentationEarth SciencesFermentationlcsh:QAlternative EnergyElectricityPhysiological ProcessesEnergy MetabolismbusinessResearch ArticleBiotechnologyDevelopmental BiologyPLoS ONE
researchProduct

A photovoltaic charging system of an electrically assisted tricycle for touristic purposes

2013

In this paper the design, realization and testing of a photovoltaic charging system suitable for the management of an electrically power assisted tricycle are described. This vehicle uses a photovoltaic module as a source of electric energy for the battery recharging. In this work, an overview on the needs of sustainable mobility and on the commercial electrically power assisted velocipedes is presented. The electrical rickshaw prototype, developed in the SDELab laboratory of the University of Palermo, is presented in detail, underlining the design, implementation and developing phases of the photovoltaic charging system assembled on the velocipede. Moreover, tests oriented on the setting u…

Battery (electricity)Engineeringbattery packbattery rechargingSettore ING-IND/32 - Convertitori Macchine E Azionamenti Elettricibattery management systemBattery management systemsWhole systemsphotovoltaic charging systemElectric energybattery powered vehiclePhotovoltaic systemecondary cellelectrically power assisted vehicleelectrical rickshaw vehiclevehicle autonomybusiness.industryPhotovoltaic systemElectrical engineeringPower (physics)electrical rickshaw autonomyelectrically power assisted velocipedephotovoltaic power systemWork (electrical)Management systemelectrically power assisted tricycletourismtravel industrybusiness
researchProduct

Different scenarios of electric mobility: Current situation and possible future developments of fuel cell vehicles in Italy

2020

The diffusion of electric vehicles in Italy has started but some complications weight its spread. At present, hybrid technology is the most followed by users, due particularly to socioeconomic factors such as cost of investment and range anxiety. After a deep discussion of the Italian scenario, the aim of the paper is to recognize whether fuel cell technology may be an enabling solution to overcome pollution problems and respect for the environment. The opportunity to use fuel cells to store electric energy is quite fascinating&mdash

Battery electric vehicle020209 energyGeography Planning and DevelopmentFuture of e-mobilityTJ807-83002 engineering and technologyManagement Monitoring Policy and LawE-mobilityElectric vehicleSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciTD194-195Renewable energy sourcesSocio-technical transitionElectric energy0202 electrical engineering electronic engineering information engineeringGE1-350electric vehiclesRange anxietyEnvironmental effects of industries and plantsRenewable Energy Sustainability and the Environmentbattery electric vehiclesEnvironmental economics021001 nanoscience & nanotechnologyInvestment (macroeconomics)Passenger transportEnvironmental sciencesSettore ING-IND/31 - ElettrotecnicaWork (electrical)Fuel cellsNiche marketBusinessCurrent (fluid)0210 nano-technology
researchProduct

Enhanced Electrochemical Properties of Na0.67MnO2 Cathode for Na-Ion Batteries Prepared with Novel Tetrabutylammonium Alginate Binder

2022

This research was funded by the State Education Development Agency, the Republic of Latvia, grant number 1.1.1.2/VIAA/1/16/166, "Advanced Materials for Sodium-Ion Batteries". Institute of Solid-State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Horizon 2020 Framework Program H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.

BindercathodeTK1001-1841AlginateEnergy Engineering and Power Technology:NATURAL SCIENCES::Physics [Research Subject Categories]Na0.67MnO2sodium-ion batteries; alginate; Na<sub>0.67</sub>MnO<sub>2</sub>; binder; cathodeNa<sub>0.67</sub>MnO<sub>2</sub>TP250-261Production of electric energy or power. Powerplants. Central stationsIndustrial electrochemistryElectrochemistryCathodesodium-ion batteriesalginateElectrical and Electronic EngineeringSodium-ion batteriesbinderBatteries
researchProduct

Cadmium Recovery from Spent Ni-Cd Batteries: A Brief Review

2021

The significant increase in the demand for efficient electric energy storage during the past decade has promoted an increase in the production and use of Cd-containing batteries. On the one hand, the amount of toxic Cd-containing used batteries is growing, while on the other hand, Cd is on a list of critical raw materials (for Europe). Both of these factors call for the development of effective technology for Cd recovery from spent batteries. The present paper is aimed at providing a short review of the recent progress in Cd recovery from spent batteries. Statistical data from the past decade on the source of Cd, its global production, and Ni-Cd battery recycling are given in the introducti…

Cadmiumpyro-metallurgyMining engineering. MetallurgyWaste managementBattery recyclingcadmiumMetals and Alloysbattery recyclingTN1-997chemistry.chemical_elementRaw materialNi-Cd batteriesrecoverychemistryEnvironmental scienceElectric energy storageGeneral Materials ScienceCd-containing batteriesResearch dataMetals
researchProduct

Development of Point-to-Point Path Control in Actuator Space for Hydraulic Knuckle Boom Crane

2020

This paper presents a novel method for point-to-point path control for a hydraulic knuckle boom crane. The developed path control algorithm differs from previous solutions by operating in the actuator space instead of the joint space or Cartesian space of the crane. By operating in actuator space, almost all the parameters and constraints of the system become either linear or constant, which greatly reduces the complexity of both the control algorithm and path generator. For a given starting point and endpoint, the motion for each actuator is minimized compared to other methods. This ensures that any change in direction of motion is avoided, thereby greatly minimizing fatigue, jerky motion,…

Control valves0209 industrial biotechnologyControl and OptimizationComputer scienceactuator spacehydraulicspath control02 engineering and technologylaw.inventionSetpointComputer Science::Robotics020901 industrial engineering & automation020401 chemical engineeringControl theorylawLinearizationlcsh:TK1001-1841lcsh:TA401-492Cartesian coordinate systemPoint (geometry)knuckle boom craneFeedback linearization0204 chemical engineeringlcsh:Production of electric energy or power. Powerplants. Central stationsVDP::Teknologi: 500Control and Systems EngineeringPath (graph theory)lcsh:Materials of engineering and construction. Mechanics of materialsActuator
researchProduct

Biogas from energy crops--optimal pre-treatments and storage, co-digestion and energy balance in boreal conditions.

2008

The objective of this research was to evaluate the biogas production from crops in boreal conditions, focusing on the optimal pre-treatment and storage methods, co-digestion and energy balance of farm-scale crop based biogas plants. Alkaline treatments offered some potential for improving the methane yield from grass and sugar beet tops. The results show that the CH4 yield of energy crops can be maintained by appropriate ensiling conditions for even after 11 months in ambient conditions. The CH4 yield was best preserved with wet grass mixture without additives. Co-digestion of manure and crops was shown to be feasible with feedstock volatile solids (VS) containing up to 40% of crops. The hi…

Crops AgriculturalEnvironmental EngineeringSilageBioelectric Energy SourcesEnergy balanceRaw materialStrawManureEnergy cropAgronomyBiogasEnvironmental scienceGasesCow dungWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Forecasting the diffusion of hydrogen EV refuelling infrastructures in Italy

2019

In Italy the electric vehicle revolution is arrived but it still has difficulties to take off. At the moment hybrid technology would seem the most quoted, due especially to range anxiety. The aim of this work is to understand if the fuel cell technology can find place in Italy. The possibility to use fuel cell to storage electric energy is quite interesting: the charging times will be reduced, and heavy passenger transportation should be easily faced. Basing on the existing history and analysis of the information accessible, this paper addresses the existing e-mobility scenario in Italy and predicts the cities in which a hydrogen refuelling infrastructure should be more remunerative, in ord…

Diffusion (acoustics)InfrastructureRange anxietybusiness.product_category020209 energy02 engineering and technology010501 environmental sciencesEnvironmental economicsE-mobilityElectric vehicle01 natural sciencesCharging stationElectric energyWork (electrical)Order (exchange)Electric vehicleCharging station0202 electrical engineering electronic engineering information engineeringNiche marketbusiness0105 earth and related environmental sciences
researchProduct

New approaches for the effective valorization of papaya seeds: Extraction of proteins, phenolic compounds, carbohydrates, and isothiocyanates assiste…

2015

Abstract The study compares the efficiency of common aqueous extraction (CE) at different pH (2.5–11) and temperatures (20–60 °C) and extraction assisted by pulsed electric energy (pulsed electric fields, PEF or high voltage electrical discharges, HVED) of nutritionally valuable and antioxidant compounds from papaya seeds. The exponential decay pulses with initial electric field strengths of ≈ 13.3 kV/cm and ≈ 40 kV/cm for PEF and HVED treatments, respectively, were used. The number of pulses n was changed within 1–2000. The impacts of temperature and pH on extraction efficiency of different components (proteins, total phenolic compounds, carbohydrates, isothiocyanates) and antioxidant capa…

ElectrolysisAqueous solutionAntioxidantChemistrymedicine.medical_treatmentRadicalExtraction (chemistry)Contaminationlaw.inventionElectric energylawElectric fieldmedicineOrganic chemistryFood ScienceNuclear chemistryFood Research International
researchProduct