Search results for "electrodeposition"
showing 10 items of 104 documents
High-performance of PbO2 nanowire electrodes for lead-acid battery
2014
Abstract PbO2 nanowires were obtained by template electrodeposition in polycarbonate membranes and tested as positive electrode for lead-acid battery. Nanowires were grown on the same material acting as current collector that was electrodeposited too. The nanostructured electrodes were assembled in a zero-gap configuration using commercial negative plate and separator. Cell performance was tested by galvanostatic charge/discharge cycles in a 5 M H2SO4 aqueous electrolyte. PbO2 nanostructured electrodes were able to deliver at 1C rate an almost constant capacity of about 190 mAh g−1 (85% of active material utilization), close to the theoretical value (224 mAh g−1). The nanowire array provide…
One-Step Electrodeposition of CZTS for Solar Cell Absorber Layer
2015
CZTS thin films were obtained by one-step electrochemical deposition from aqueoussolution at room temperature. Films were deposited on two different substrates, ITOon PET, and electropolished Mo. Differently from previous studies focusing exclu‐sively on the formation of kesterite (Cu4ZnSnS4), here, the synthesis of a phase withthis exact composition was not considered as the unique objective. Really, startingfrom different baths, amorphous semiconducting layers containing copper–zinc–tin–sulphur with atomic fraction Cu0.592Zn0.124Sn0.063S0.221 and Cu0.415Zn0.061Sn0.349S0.175, werepotentiostatically deposited. Due to the amorphous nature, it was not possible to de‐tect if one or more phases…
Fabrication and Characterisation of Perovskite Thin Films for Photovoltaic Application
2018
This paper presents an alternative way to obtain perovskite thin films for photovoltaic application. This technique results more competitive, scalable, low-cost, reproducible and is different from other most common methods of fabrication.
Application of electrochemical impedance for characterising arrays of Bi2S3 nanowires
2015
Abstract Electrochemical Impedance Spectroscopy (EIS) was used to characterise the electrical properties of bismuth sulphide (Bi2S3) nanowires (NWs) templated within anodic aluminium oxide (AAO) membranes. A specially engineered cell, with a nominal electrolyte volume of 0.1–0.2 ml, was used to hold and measure the electrochemical impedance of the fragile NW/AAO samples. An equivalent circuit model was developed to determine the filling density of nanowires within the porous templates. The EIS method can be utilised to probe the nanowire filling density in porous membranes over large sample areas, which is often unobtainable using electron microscopy and conductive atomic force microscopy t…
Electrosynthesis and properties of poly(3,4-ethylenedioxythiophene) films functionalized with titanocene dichloride complex
2006
Synthesis of a titanocene dichloride derivative functionalized with 3,4-etylenedioxythiophene group, Tc1EDOT (Cl 2TiCpC5H4(CH2) (3,4ethylenedioxythiophene)) has been described. Redox behavior of the monomer in tetrahydrofuran (THF), dichloromethane (DCM) and acetonitrile (AN) at different scan rates has been discussed in terms of different ability of these solvents to coordination with the reduced titanocene (Tc) complex and the solvation of Cl − anions. Electrooxidation of Tc1EDOT to get a conducting polymer film with immobilized titanocene dichloride centers and electrochemical properties of its polymer matrix in background acetonitrile solution have been compared with those of non-substi…
Magnetic field effect on electrodeposition of cobalt dendrites
2012
International audience; We are studying the effect of a magnetic field on cobalt dendrites grown by electrodeposition in thin cell. Several electrochemical parameters like pH, current density, initial concentration, are known to affect the crystalline structure of electrodeposited cobalt. Here we analyze, for two values of the pH, the effect of a high magnetic field (6 T) on the growth direction of the dendrites with respect to the crystalline axis of the structure.
Dual Ni/Ni-Co electrodeposited coatings for improved erosion-corrosion behaviour
2019
Abstract Industrial applications of hydrophobic metallic coatings are limited to durability of their surface structures against detrimental effects of the surrounding environments. In the present research, the life-long of the hierarchical structure of hydrophobic nickel coating in an erosive-corrosive solution was investigated. The effect of alloying with cobalt on strengthening the hierarchical structures was also investigated. In this regard, highly hydrophobic Ni/Ni, Ni-Co/Ni-Co, dual Ni/Ni-Co and dual Ni-Co/Ni coatings with rough hierarchical structures were electrodeposited. In situ electrochemical measurements were performed to investigate changes in corrosion resistance and hydropho…
Parametrical study of multilayer structures for CIGS solar cells
2014
In this paper, a numerical analysis of relevant electrical parameters of multilayer structures for CIGS-based solar cells was carried out, employing the simulation software wxAMPS. In particular, we have focused on thin film cells having a ZnO:Al/ZnO/CdS/CIGS structure with a Molybdenum back contact. The aim of this work is to establish good theoretical reference values for an ongoing experimental activity, where our technology of choice is the single-step electrodeposition. In detail, we have analyzed how the main electrical properties change with the bang gap and the thickness of the absorber layer, for such a type of solar cell structure. Our results show that both efficiency and fill fa…
Effects of electrolyte doping on electrodeposited nanostructured manganese oxide and chromium oxide
2020
Abstract Electrolyte additions are used to control the functionality of a nanostructured oxide. Dopant ions affect the size and shape of deposit crystallites and modify the host structure. Such ions can be incorporated into the deposit or form a separate oxide phase. The manganese dioxide family of polymorphs with ion-molecular sieve properties represents the additional possibilities of “template” effects of dopant ions on the phase composition, heterovalent substitution in the cationic sublattice, changes in morphology and alteration of nanocrystallite size during electrocrystallisation. The effects of electrolyte doping in electrodeposited, non-stoichiometric manganese dioxide (NH4+, Li+ …
Double Step Electrochemical Process for the Deposition of Superhydrophobic Coatings for Enhanced Corrosion Resistance
2021
Superhydrophobic surface on anodized AA5083 sample was obtained by an electrochemical process. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy analyses revealed the hierarchical structure of the coating and the presence of manganese stearate. These features were crucial for the coating superhydrophobicity, demonstrated by a measured contact angle of ~ 163° and its self-cleaning ability. Electrochemical characterization in an aqueous solution mimicking seawater proved an enhanced corrosion resistance due to the superhydrophobic coating with respect to anodized AA5083 sample that also lasted after 20 immersion days in Cl- containing electrolyte.