Search results for "electron spectroscopy"

showing 10 items of 525 documents

ORR Activity and Stability of Co-N/C Catalysts Based on Silicon Carbide Derived Carbon and the Impact of Loading in Acidic Media

2018

This work was supported by the EU through the European Regional Development Fund under projects TK141 “Advanced materials and high-technology devices for energy recuperation systems” (2014-2020.4.01.15-0011), NAMUR ”Nanomaterials - research and applications” (3.2.0304.12-0397) and by the Estonian institutional research grant No. IUT20-13.

inorganic chemicalschemistry.chemical_element02 engineering and technology010402 general chemistryElectrochemistry01 natural sciences7. Clean energyCatalysisElectron transferchemistry.chemical_compoundX-ray photoelectron spectroscopy:NATURAL SCIENCES:Physics [Research Subject Categories]Materials ChemistryElectrochemistrySilicon carbideheterocyclic compoundsRenewable Energy Sustainability and the EnvironmentChemistryorganic chemicals021001 nanoscience & nanotechnologyCondensed Matter PhysicsNitrogen0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsChemical engineeringDegradation (geology)0210 nano-technologyCarbonJournal of The Electrochemical Society
researchProduct

Structural Characterization of Surfactant-Coated Bimetallic Cobalt/Nickel Nanoclusters by XPS, EXAFS, WAXS, and SAXS

2011

Cobalt nickel bimetallic nanoparticles were synthesized by changing the sequence of the chemical reduction of Co(II) and Ni(II) ions confined in the core of bis(2-ethylhexyl)phosphate (2)., and Ni(DEHP)(2). The reduction was carried out by mixing, sequentially or contemporaneously, fixed amounts of n-heptane solution of Co(DEHP)2 and Ni(DEHP)2 micelles with a solution of sodium borohydride in ethanol at a fixed (reductant)/(total metal) molar ratio. This procedure involves the rapid formation of surfactant-coated nanoparticles, indicated as Co/Ni (Co after Ni), Ni/Co (Ni after Co), and Co + Ni (simultaneous), followed by their slow separation as nanostructures embedded in a sodium bis(2-eth…

inorganic chemicalsendocrine systemMaterials sciencechemistry.chemical_elementNanoparticleNanoclustersMetalSodium borohydridechemistry.chemical_compoundX-ray photoelectron spectroscopyNANOPARTICLESPARTICLESBimetallic Cobalt/Nickel Nanoclusters. XPS. EXAFS. WAXS. SAXS.GOLDPhysical and Theoretical ChemistryBimetallic stripMICELLESSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsCrystallographyNickelGeneral Energychemistryvisual_artNANOPARTICLES; PARTICLES; GOLD; MICELLESvisual_art.visual_art_mediumCobaltNuclear chemistry
researchProduct

Study of the role of sulfur functionalities in humic acids for uranium(VI) complexation

2009

Humic substances influence the speciation and migration behavior of toxic and radiotoxic metal ions, such as actinides, in the environment. Depending on their origin, humic substances contain different amounts of sulfur ranging from 0.1 to 3.6% and 0.5 to 1.43% in soil and aquatic humic substances, respectively [1]. Reduced, intermediately oxidized and highly oxidized sulfur functionalities occur in humic substances [1]. Although sulfur functionalities occur in small concentrations, they can play an important role in the complexation of selected metal ions. Knowledge about the impact of sulfur functionalities on the metal ion complexation by humic substances and their significance compared …

inorganic chemicalsfs-TRLFScomplexationInorganic chemistryTRLFSchemistry.chemical_elementHumic substancesOxygencomplex mixturesFluorescence spectroscopysulfur functionalitiesfunctional groupsX-ray photoelectron spectroscopyXPSHumic acidPhysical and Theoretical Chemistrychemistry.chemical_classificationLigandUraniumSulfurhumic acidshumic acid model substanceschemistryHumic aciduranium(VI)sulfurThiol
researchProduct

Total oxidation of naphthalene using bulk manganese oxide catalysts

2013

Several Mn2O3 catalysts have been synthesized using different preparation methods and tested for the total oxidation of naphthalene, a model polycyclic aromatic compound. The catalysts have been characterized by several physico-chemical techniques such as XRD, TPR, XPS, EDX and TEM. The surface area of the catalyst seems to be of paramount importance, since the mass normalized activity of catalysts increases as the surface area of the Mn2O3 catalysts increases. Consequently, a high surface area ordered mesoporous Mn2O3 catalyst, obtained through a nanocasting route using mesoporous KIT-6 silica as a hard template, was the most efficient catalyst for the deep oxidation of naphthalene. In add…

inorganic chemicalsorganic chemicalsProcess Chemistry and TechnologyCatalyst supportInorganic chemistryCatalysisCatalysisHopcalitechemistry.chemical_compoundchemistryCatalytic oxidationX-ray photoelectron spectroscopyPhase (matter)heterocyclic compoundsMesoporous materialNaphthaleneApplied Catalysis A: General
researchProduct

Electron spectroscopy with the SAGE spectrometer

2016

A device called the SAGE (Silicon And GErmanium) spectrometer, designed for in-beam electron spectroscopy, is introduced in this work. A detailed description to the technical aspects of the device is given along with several examples of analytical procedures related to work done with the device. The radial ltering method and veto/add-back algorithms are tools for improving the quality of the electron-gamma data whilst the time-gate selection procedure helps in determining absolute internal conversion coe cients without reference points. Two very di erent types of experiments with results obtained from the electron data are introduced and analysed. Coulomb excitation is used to probe 154Sm a…

instrumentationspektroskopiaspektrometritelectron spectroscopyelektronitmittaustekniikka¹⁵⁴Smspektrometriaydinreaktiot¹⁹⁴Pomittauslaitteetsamariumydinfysiikkapolonium
researchProduct

Eco-friendly cavity-containing iron oxides prepared by mild routes as very efficient catalysts for the total oxidation of VOCs

2018

Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by mild routes: hydrothermal in subcritical and supercritical conditions (Fe-HT, Few200, Few450) and solvothermal (Fe-ST1 and Fe-ST2). The catalytic activity of these catalysts was studied for the total oxidation of toluene using very demanding conditions with high space velocities and including water and CO2 in the feed. The samples were characterized by X-ray diffraction (XRD), scanning and high-resolution transmission electron microscopy (SEM and…

iron oxideMaterials scienceTotal oxidationIron oxide02 engineering and technologyMetalurgia010402 general chemistrylcsh:Technology01 natural sciencesMild preparation routesArticleHydrothermal circulationCatalysischemistry.chemical_compoundX-ray photoelectron spectroscopytotal oxidationVolatile organic compounds (VOC)Iron oxideGeneral Materials Sciencelcsh:MicroscopyPorosityHigh-resolution transmission electron microscopylcsh:QC120-168.85lcsh:QH201-278.5lcsh:Tcavities021001 nanoscience & nanotechnologyTolueneQuímica inorgánicavolatile organic compounds (VOC)Supercritical fluid0104 chemical scienceschemistryChemical engineeringlcsh:TA1-2040mild preparation routeslcsh:Descriptive and experimental mechanicslcsh:Electrical engineering. Electronics. Nuclear engineeringlcsh:Engineering (General). Civil engineering (General)0210 nano-technologylcsh:TK1-9971
researchProduct

When the Grafting of Double Decker Phthalocyanines on Si(100)-2 × 1 Partly Affects the Molecular Electronic Structure

2016

International audience; A combined X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and density functional theory (DFT) study has been performed to characterize the adsorbate interaction of lutetium biphthalocyanine (LuPc2) molecules on the Si(100)-2 × 1 surface. Large molecule–substrate adsorption energies are computed and are found to compete with the molecule–molecule interactions of the double decker molecules. A particularly good matching between STM images and computed ones confirms the deformation of the molecule upon the absorption process. The comparison between DFT calculations and XP spectra reveals that the electronic distribution in the two plateaus …

lutetium bi-phthalocyanineSiliconXASAtom and Molecular Physics and OpticsSTMAnalytical chemistrychemistry.chemical_element02 engineering and technology010402 general chemistryDFT[ CHIM ] Chemical Sciences01 natural sciencesSi(100)law.inventionAdsorptionX-ray photoelectron spectroscopyscanning tunneling microscopelawbasis-setXPS[CHIM]Chemical SciencessurfaceMoleculePhysical and Theoretical ChemistryBasis setmetal-free phthalocyaninefield-effect transistorsPhthalocyaninebis-phthalocyanine021001 nanoscience & nanotechnology0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialstotal-energy calculationsGeneral EnergyElectronic Structurechemistrysi(001)Chemical physicsthin-filmsaugmented-wave methodAtom- och molekylfysik och optikDensity functional theoryScanning tunneling microscopeAbsorption (chemistry)0210 nano-technologyThe Journal of Physical Chemistry C
researchProduct

Surface modification of poly(ethylene-co-acrylic acid) with amino-functionalized silica nanoparticles

2011

In this work we studied the possibility to achieve a hybrid-surface through the modification, via a facile wet chemical process, of the surface of films of poly(ethylene-co-acrylic acid) (EAA) with amino-modified silica nanoparticles. Films of EAA were preliminarily activated by the introduction of -COCl groups on their surface. Silica nanoparticles were thereafter covalently bound on the polymeric surface as confirmed by FTIR, ATR-FTIR, XPS, NMR and SEM determinations. The nanoparticles formed a multilayer on the film surface and covered almost uniformly the whole film surface. Direct measurements of superficial amino groups by titration allowed us to detect a concentration of about 18 nmo…

nanostructured hybrid materialsMaterials scienceTRIALKOXYSILANE DERIVATIVESNanoparticleGeneral ChemistryCOATED MAGNETIC NANOPARTICLESContact anglechemistry.chemical_compoundSurface modificationchemistryChemical engineeringX-ray photoelectron spectroscopyPolymer chemistryMaterials Chemistrynanoparticles functionalizationSurface modificationWettingFourier transform infrared spectroscopyCOLLOIDAL SILICACATALYZED SYNTHESISAcrylic acidPolymeric surfaceJournal of Materials Chemistry
researchProduct

Hard x-ray photoelectron spectroscopy: a snapshot of the state-of-the-art in 2020

2021

Journal of physics / Condensed matter 33(23), 233001 (1-44) (2021). doi:10.1088/1361-648X/abeacd

photoemission spectroscopyPhotoemission spectroscopyComputer sciencephotoelectron spectroscopy02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesEngineering physics530X-ray photoelectron spectroscopyhard x-ray photoelectron spectroscopy0103 physical sciencesSnapshot (computer storage)General Materials Scienceddc:530Instrumentation (computer programming)010306 general physics0210 nano-technologyDen kondenserade materiens fysik
researchProduct

Biocompatibility and Antibacterial Properties of ZnO-Incorporated Anodic Oxide Coatings on TiZrNb Alloy

2020

In a present paper, we demonstrate novel approach to form ceramic coatings with incorporated ZnO nanoparticles (NPs) on low modulus TiZrNb alloy with enhanced biocompatibility and antibacterial parameters. Plasma Electrolytic Oxidation (PEO) was used to integrate ZnO nanoparticles (average size 12&ndash

plasma electrolytic oxidationMaterials scienceBiocompatibilityZnO nanoparticlesGeneral Chemical EngineeringAlloy02 engineering and technologyengineering.material010402 general chemistry01 natural sciencesArticlelcsh:ChemistryContact angleCoatingX-ray photoelectron spectroscopyGeneral Materials Scienceantibacterial propertiescell cultureAqueous solutiontechnology industry and agricultureAdhesionPlasma electrolytic oxidation021001 nanoscience & nanotechnologyTiZrNb alloy0104 chemical scienceslcsh:QD1-999Chemical engineeringengineering0210 nano-technologyNanomaterials
researchProduct