Search results for "electronics"

X-ray investigation of combined main-chain/side-chain liquid-crystalline polymers

1990

Abstract Structural investigations on six combined liquid-crystalline polymers using the X-ray technique are described. The measurements have allowed a characterization of the liquid-crystalline phases and have led to our first ideas about the phase structures. All mesogenic groups are arranged parallel to each other, the shortest segment in the main-chain or in the side-chain determines the smectic layer spacing. A modified designation for liquid-crystalline phases of high polymers is proposed.

Study of smectic elastomer films under uniaxial stress

2004

We study the mechanical properties of free-standing films of smectic liquid crystalline elastomers. Macroscopically ordered elastomer films of submicrometer thickness are prepared from freely suspended smectic A polymer films by photo crosslinking. The deformation characteristics depend criticically on the sample composition, in particular on the density of mesogenic side chains at the siloxane backbone. In materials where the siloxane backbone is only partially substituted (dilute systems), a uniaxial stretching of the films in the layer plane is accompanied by a shrinkage of the smectic layers. This layer shrinkage is to only a minor extent achieved by the induction of a molecular tilt. W…

Covalently attached polymer mono- and multilayers on silanized glass substrates

1996

Abstract Applying grazing incidence FTIR and ellipsometry, the reaction of poly [(1-methyl-vinyl isocyanate)-alt-(maleic anhydride)](IAP) with amino-silanized glass and silicon oxide surfaces has been investigated. A reactive surface containing isocyanate and anhydride groups was formed after the adsorption of the polymer. The layer could be further functionalized using 2-aminoethanol. Multilayers could be built up by adsorbing a second layer of IAP onto an already reacted first layer of IAP.

Optimization of Polymer Blue-Light-Emitting Devices by Introducing a Hole-Injection Layer Doped with the Molecular Nanomagnet [Mn12O12(H2O)4(C6F5COO)…

2006

Second harmonic generation in self-assembled alternating multilayers of hemicyanine containing polymers and polyvinylamine

1995

Abstract Assembly of noncentrosymmetric multilayers is a facile technique for preparing noncentrosymmetric films avoiding electrical poling procedures and problems from subsequent relaxation of the induced orientational order. A maximum Xzzz of 13 × 10−9 esu was achieved for the assembly of up to six layers. Current problems are the long-term hydrolysation of the hemicyanine nonlinear optical chromophores and the reduction of polar orientation with increasing layer thickness.

Direct Surface Relief Formation in Polymer Films

2013

Due to active development of nanoelectronics, the studies of methods of nanorelief surface formation in different materials, in particular polymers are very important. Organic polymer films in consequence of their dielectric and optical properties have been used as basis of these devices. In this paper, the possibility of UV optical record and electron beam lithography in different type of polymeric films was studied. Mechanisms of molecular structure changes: photoisomerization, destruction, cross-linking and oxidation have been discussed. The results of UV illumination of polyurethanes, polyacrylates, and some block-copolymers were described. The element analysis of polybutadiene block co…

UV optical record and electron beam lithography in polymer films

2012

Possibility of UV optical record and electron beam lithography in different type of organic polymer films was studied. Mechanisms of molecular structure changes: photoisomerization, destruction, cross-linking and oxidation have been discussed. The results of UV illumination of polyurethanes, polyacrilates, and some block-copolymers are described. The element analysis of polyisoprene block copolymer was performed before and after UV illumination, and the changes in transmission spectra of the polymer film were measured. The resolution of electron beam lithography on polymer films was studied. In the polyisoprene block copolymer film the oxidation polymerization was ascertain at UV-illuminati…

Low-dimensional iodide perovskite nanocrystals enable efficient red emission

2019

We report herein a simple ligand-assisted reprecipitation method at room temperature to synthesize mixed-cation hybrid organic–inorganic perovskite nanocrystals with low structural dimensionality.

<title>Effect of light exposure on dislocation mobility in fullerite C60 crystals</title>

2001

The illumination-time evolution and the wavelength dependence of the photoinduced changes in dislocation mobility on the (111) face of C60 single crystals in air for the wavelength range 150 - 900 nm and power densities 0.2 - 2 mW/cm2 has been investigated. The results show that the light exposure in air leads to the decrease of the dislocation mobility. The magnitude of the effect as a function of the illumination time was investigated and a two-stage relationship was obtained. The ultraviolet light was found to be more effective than the visible light in the photoinduced reduction of dislocation mobility and solubility. In the wavelength range of 150 - 700 nm, the reduction of dislocation…

Neutron reflectometry studies on the interfacial width between polystyrene and various poly(alkylmethacrylates)

1999

From neutron reflectometry we have obtained the interfacial width (typically 2-8 nm) between incompatible polymers above the glass transition temperatures. The investigated polymer bilayers consist of a deuterated polystyrene top layer and various poly(alkylmethacrylates) as a bottom layer. We obtained interesting effects of the length of the alkyl group on the interfacial width. Using mean-field theory we calculate Flory-Huggins-Stavermann interaction parameters X from the interfacial width a I data. These results are compared with investigations of the interfacial width between deuterated poly(methylmethacrylate) and respective polyalkyl-methacrylates.