Search results for "electronics"
showing 10 items of 4340 documents
Asymmetric transmission of transverse magnetic or radially polarized THZ waves through sub-wavelength gratings
2015
We have developed a metallic double circular grating with sub-wavelength slits which blocks radially polarized light incident from one of its sides and acts as a focusing diffractive element in the other direction. The proposed grating has been optimized for the sub-THz frequency range. Unidirectional transmission through the grating has been demonstrated experimentally at 0.1 THz. We have also developed a planar metallic double grating with sub-wavelength slits which blocks light with a transverse magnetic polarization incident from one of the grating sides and transmits radiation incident from the opposite direction into the +1 and −1 diffraction orders. These gratings which could be used…
Vapor growth of Hg1−xCdxI2 on glass using CdTe buffer
2001
Abstract Vapor phase epitaxy (VPE) of Hg1−xCdxI2 layers on glass substrates covered by a CdTe buffer layer has been studied. The buffer layers of 2–4 μm thickness were formed by VPE using polycrystalline CdTe and Cd metal sources. The Hg1−xCdxI2 layers were grown using a (Hg1−yCdy)1−z(I2)z polycrystalline source, with a composition in the range of y=0.1–0.5 and z=0.5–0.8. Scanning electron microscopy and X-ray diffraction studies have shown that the composition and structure of Hg1−xCdxI2 layers depend strongly on the VPE conditions. Varying the growth time and source composition, it has been possible to obtain Hg1−xCdxI2 layers with the composition x in the range from approximately 0 (HgI2…
Dispersion Compensation in Holograms Reconstructed by Femtosecond Light Pulses
2014
This chapter describes how the spatiotemporal dispersion associated with the diffraction of broadband femtosecond light pulses through computer generated holograms (CGHs) can be compensated to a first order with a properly designed dispersion compensation module (DCM). The angular dispersion of the beam associated to CGHs leads to both spatial and temporal distortion of the pulse. Some experiments in one-shot second harmonic generation, wide-field two-photon microscopy, and parallel micromachining are shown to study the quality of the compensation performed with the DCM.
Investigation of AC Electrical Properties of MXene-PCL Nanocomposites for Application in Small and Medium Power Generation
2021
The paper examined Ti3C2Tx MXene (T—OH, Cl or F), which is prepared by etching a layered ternary carbide Ti3AlC2 (312 MAX-phase) precursor and deposited on a polycaprolactone (PCL) electrospun membrane (MXene-PCL nanocomposite). X-ray Diffraction analysis (XRD) and Scanning Electron Microscopy (SEM) indicates that the obtained material is pure Ti3C2 MXene. SEM of the PCL-MXene composite demonstrate random Ti3C2 distribution over the nanoporous membrane. Results of capacitance, inductance, and phase shift angle studies of the MXene-PCL nanocomposite are presented. It was found that the frequency dependence of the capacitance exhibited a clear sharp minima in the frequency range of 50 Hz to o…
Determinant role of the edges in defining surface plasmon propagation in stripe waveguides and tapered concentrators
2012
International audience; In this paper, we experimentally show the effect of waveguide discontinuity on the propagation of the surface plasmon in metal stripes and tapered terminations. Dual-plane leakage microscopy and near-field microscopy were performed on Au stripes with varied widths to imag29e the surface plasmon intensity distribution in real and reciprocal spaces. We unambiguously demonstrate that edge diffraction is the limiting process determining the cutoff conditions of the surface plasmon mode. Finally, we determine the optimal tapered geometry leading to the highest transmission.
Structural analysis of CdO layers grown on r-plane sapphire (011¯2) by metalorganic vapor-phase epitaxy
2004
Abstract High-quality fully relaxed CdO layers have been grown directly on r -plane sapphire by metalorganic vapor-phase epitaxy. The crystalline structure has been analyzed by high-resolution X-ray diffraction. The structural quality of the (0 0 1) oriented layers degrades as the growth temperature decreases, process which is accompanied by the appearance of pyramidal grains as revealed by scanning force microscopy. The lattice parameters, perpendicular and parallel to the sample surface, have been determined by means of reciprocal space maps taken on asymmetrical reflections and measurements of symmetrical reflections at different azimuths. The epitaxial relationships between the CdO laye…
32×32 winner-take-all matrix with single winner selection
2010
A 32 × 32 winner-take-all (WTA) matrix with single winner selection is introduced. A high-resolution gain-boosted regulated-cascode WTA circuit is used in a first competition stage. Because of the large number of competing cells the possibility of a multiple winners situation arises. A single winner is obtained by means of a digital inhibitory circuit following each WTA analogue amplifier. Simulations show that this mixed analogue-digital circuit achieves its objective with a current resolution of approximately 10 nA (0.8% of the maximum input current in the simulated case). A time response of ?s can be achieved.
Mixed-type circuits with distributed and lumped parameters as correct models for integrated structures
1991
The technology of integrated circuits imposes upon their designers the need to deal with structures with distributed parameters. Figure 4.1 shows a schematic diagram of part of a digital integrated chip, consisting of an n MOS transistor with gate (G), drain (D) and source (S) as terminals, and its thin-film connection with the rest of the chip. This on-chip connection can be made by metals (Al, W), polycristaline silicon (polysilicon) or metal suicides (WSi 2 ). Alternative materials to oxide-passivated silicon substrates are saphire and gallium arsenide (Saraswat and Mohammadi [1982], Yuan et al. [1982], Passlack et al. [1990]).
Performance of the Fully Digital FPGA-Based Front-End Electronics for the GALILEO Array
2014
In this work we present the architecture and results of a fully digital Front End Electronics (FEE) read out system developed for the GALILEO array. The FEE system, developed in collaboration with the Advanced Gamma Tracking Array (AGATA) collaboration, is composed of three main blocks: preamplifiers, digitizers and preprocessing electronics. The slow control system contains a custom Linux driver, a dynamic library and a server implementing network services. The digital processing of the data from the GALILEO germanium detectors has demonstrated the capability to achieve an energy resolution of 1.53 per mil at an energy of 1.33 MeV.
The ATLAS Level-1 Calorimeter Trigger
2008
The ATLAS Level-1 Calorimeter Trigger uses reduced-granularity information from all the ATLAS calorimeters to search for high transverse-energy electrons, photons, tau leptons and jets, as well as high missing and total transverse energy. The calorimeter trigger electronics has a fixed latency of about 1 microsecond, using programmable custom-built digital electronics. This paper describes the Calorimeter Trigger hardware, as installed in the ATLAS electronics cavern.