Search results for "elettrici"
showing 10 items of 959 documents
Currents Distribution During a Fault in an MV Network: Methods and Measurements
2016
When a single line to ground fault happens on the MV side of a HV/MV system, only a small portion of the fault current is injected into the ground by the ground-grid of the faulty substation. In fact the fault current is distributed between grounding electrodes and MV cables sheaths. In systems with isolated neutral or with resonant earthing this may be sufficient to provide safety from electric shock. Experimental measurements were performed on a real MV distribution network: a real single line to ground fault was made and fault currents were measured in the faulty substation and in four neighboring substations. In this paper the problem of fault current distribution is introduced, the tes…
A method for the evaluation of fault current distribution in complex high voltage networks
2015
Abstract The paper presents a method for the study of large interconnected earthing systems in High Voltage networks. The mathematical model proposed for calculating the distribution of the Single-line-to-Earth fault current is useful for a methodical and accurate analysis of complex systems having meshed configuration and more sources, and has practical application for the Transmission System Operator. Two case studies are provided. The first one considers a fault occurring inside and outside a station in a real 220 kV transmission network. In the second example, the proposed methodology is compared with the classical “Double-sided elimination” method.
A Compensation Based Method to Model PV Nodes in Backward/Forward Distribution Network Analysis
2007
PurposeThis paper proposes to identify a new model of the fixed voltage nodes (PV nodes) for medium voltage distribution systems analysis. The model is used within backward/forward (b/f) analysis method applied to solve radial and weakly meshed systems.Design/methodology/approachThe model is based on the compensation currents method for multi‐port systems which has been extensively used, within b/f analysis methods, to take into account the presence of meshes and PV nodes.FindingsTest results prove the approach to be more efficient and precise than previous methodologies and put into evidence the good performance of the proposed model in terms of speed and convergence properties.Research li…
Simple Circuit Models for Studying Global Earthing Systems
2007
The paper proposes three simple circuit models for the simulation of the behaviour of a global earthing system during different fault events. The models allow one the evaluation of the maximum earth potential rise at every possible fault location and for every possible fault event. The three considered fault events are: single-line-to-earth fault inside a MV/LV substation, double-earth-fault in a MV line, single-line-to-earth fault inside a HV/MV station. After having illustrated the hypotheses at the basis of the study, the circuit models for the three fault events are presented and a numerical example shows how to use them in order to check the "global safety" of the interconnected earthi…
Uncertainty evaluation in the measurements for the electric power quality analysis
2013
The paper deals with the uncertainty estimation in the measurements performed to assess the electric power quality. In a first steps, according to the 'ISO - Guide to Expression of the Uncertainty in Measurements' all the error sources, which give a significant contribution to the combined uncertainty associated to the measurement results, are identified. Successively, in order to analyze how the errors propagate through the measurement chain, a Monte Carlo based approach is proposed. The method exploits an ad-hoc developed simulator of the measurement process, which takes into account the particular way of propagation of all the identified error sources. Eventually, with the aim of validat…
Electric Power Quality Evaluation in the Presence of Electromagnetic Emissions
2013
The measurements for the assessment of the electric power quality are often carried out in hostile electromagnetic environments. The aim of the paper is analyzing if and how both radiated and conducted electromagnetic emissions can disturb the measurement system used to quantify these disturbances. To achieve the target, an experimental approach is proposed, which, by means of a simple and fast test, allows establishing if the real electromagnetic environment, where power quality analysis is performed, can alter the measurements. © 2013 IEEE.
Reliability Analysis of a Stand-Alone PV System for the Supply of a Remote Electric Load
2010
The work presents a reliability analysis of a stand-alone photovoltaic system for the supply of electric loads located in remote areas not easily reachable by the low voltage distribution network. The analysis is performed by characterizing the electric load behavior by means of a Montecarlo approach for taking into account the stochastic variability of the electrical energy demand. A Montecarlo approach is used also for evaluating the electricity production of the stand alone photovoltaic system as a function of the hourly solar irradiation of the installation site. The variability both of the load and of the energy production are correlated and the probability that the load can remain uns…
Experimental EMF characterization of a secondary substation
2015
This paper presents the results of the experimental EMC characterization of a new medium/low voltage (MV/LV) secondary substation, which was developed in the framework of the research project "NEW CAB ELARC". It has two MV/LV transformers, with total rated power of 1000 kVA. To perform the experimental characterization, firstly an analysis was performed of the Italian and European standards recommendations. Different approaches were highlighted and the most appropriate procedures were identified for the measurement of the magnetic fields emissions, at power systems frequency (50 Hz) in steady-state conditions. A dedicated test lab was set up for the secondary substation characterization. Th…
Speed Control of a two-Degrees of Freedom Induction Motor with Rotor Helical Motion for Industrial Applications
2014
This paper describes the realization of a two-degrees of freedom induction motor prototype with rotor helical motion, suitable for several industrial applications as grinders, augers, drilling and milling spindles, robotic arms and drives for medical tools and prostheses. This prototype was realized by combining a three-phase tubular linear induction motor (TLIM) with the stator of a three-phase rotary induction motor, resulting in a THMIM (Tubular Helical Motion Induction Motor). Moreover, a possible simple electrical drive, capable to control the helical motion, is proposed, simulated and analyzed. In particular, the mathematical model of the THMIM has been initially developed and, then, …
Sensorless low Range Speed Estimation and Parameter Identification of Induction Motor Drives Devoted to Lifts Automatic Rescue Devices
2010
In this paper a sensorless rotor speed estimation and parameter identification algorithm is presented. The algorithm is designed specifically for induction motor (IM) drives devoted to automatic rescue devices (ARD) used in lifts and hoist applications. Its peculiarity is that it is based on the sinusoidal steady state mathematical model of the IM and, therefore, can be implemented on a low cost micro-controller in a simple way, however without lacking in terms of dynamic performance. It is also capable of self tuning so that no information is required about the specific IM used in the ARD drive. Finally the algorithm allows also an appreciable energy saving of the ARD when compared to olde…