Search results for "elettrici"
showing 10 items of 959 documents
Economic impact of medium-scale battery storage systems in presence of flexible electricity tariffs for end-user applications
2012
This article addresses the question if it is cost-effective to use medium-scale battery storage systems for time-of-use (TMO) energy cost applications at a consumer level, assuming flexible electricity tariffs in the Italian electricity market. TMO application allows customers to reduce their electricity bill charging the storage when off-peak time periods are applied and discharge it during on-peak periods, when electricity energy prices are high. The analysis is carried out taking into account three different electrochemical storage technologies. The economical comparison shows that, at the current costs of storage technologies and at the electricity tariffs currently offered in Italy, th…
Wireless battery chargers for portable applications: Design and test of a high-efficiency power receiver
2013
In this study, the authors present a 5 W wireless battery charger for handheld devices. Efficiency-related issues are addressed. A power receiver architecture which improves power conversion efficiency is proposed. Design hints are provided for further applications. Comparison with a conventional architecture is provided as well. Laboratory prototypes of both the proposed and the conventional architectures have been realised. Both prototypes are tested by using the same power transmitter to perform a valuable comparison. As shown by the experimental results, in the receiver side power conversion efficiency is increased up to 99% thanks to the proposed solution.
Efficiency optimization in bi-directional inductive power transfer systems
2015
Inductive Power Transfer (IPT) allows to wirelessly supply electronic devices. Thus, it is a very smart technique of battery charging for electric vehicles. In a parking area scenario, IPT is a proper method aiming at the energy transfer from the vehicle battery to the electric grid too. Bi-Directional Inductive Power Transfer (BDIPT) Systems are an attractive solution for the automotive market. Due to the great relevance of the energy saving problem, the goal of an efficiency maximization is researched by the energy market. In this paper, an in-depth investigation of the power efficiency in BDIPT systems is carried out, aiming at the optimum efficiency.
Recharge stations: A review
2016
Charging equipment for all-Electric Vehicles (EVs) is classified by the rate at which the batteries are charged. Charging times vary based on how depleted the battery is, how much energy it holds, the type of battery, and the type of Electric Vehicle Supply Equipment (EVSE). In this paper, a review of the innovative charging stations is reported.
Stationary battery systems in the main world markets: Part 2: Main trends and prospects
2017
Stationary battery systems are gaining a lot of interest in recent years, mainly because of their ability to balance generation and demand of electricity over time. The intermittent nature of renewable generation connected to the power grid is causing major stability and reliability issues in the power system, that can be solved also using stationary storage systems, able to provide the ancillary services necessary to the proper operation of the power network. Despite the considerable advantages offered by these technologies, the electrochemical storage industry is still in the nascent state and it is important to identify the main trends and prospects in relation to future technical develo…
A Small Power Transmission Prototype for Electric Vehicle Wireless Battery Charge Applications
2012
In this paper a low cost prototype of wireless power transfer system based on air coupling is presented. The system here proposed can be useful for electric vehicle (EV) battery charging systems. It consists mainly of two copper wire coils, placed one in front of the other on the same axis. The inductor coil can easily be placed under the road surface (in a parking), while the other (the receiver coil) in the lower side of the vehicle. By exploiting the coils resonance coupling effect, electric energy can be transferred from the inductor coil to the receiver in order to charge the batteries. Low cost experimental tests carried out at DIEETCAM - University of Palermo, demonstrated the effect…
Fuel cell modelling for power supply systems design
2008
Today academic and industrial research is addressed on fuel cell based power supply to replace current lithium-ion and similar rechargeable battery systems. For system simulation, fuel cell models are developed. Even if power electronics designers demand for a blackbox model to limit the knowledge of physical and chemical parameters, high performance in terms of model accuracy and portability is absolutely necessary. A steady state and dynamic fuel cell model oriented to power supply systems design is proposed and, as an example, the implementation on PSIM software is presented. Simulation and experimental results are compared and the model portability is discussed. ©2008 IEEE.
An inductive charger for automotive applications
2016
The inductive charging represents a valid solution for the power transfer in automotive applications. Due to the Inductive Power Transfer (IPT), the wireless battery charging of Electric Vehicles (EVs) provides several benefits. In this paper, an inductive charger which is particularly suitable for electrical bicycles is proposed. A practical realization of the system has been carried out, and the system has been tested in terms of working and efficiency. Through a Phase Shift Modulation (PSM), a power regulation has been implemented. The target power is 100 W.
A photovoltaic charging system of an electrically assisted tricycle for touristic purposes
2013
In this paper the design, realization and testing of a photovoltaic charging system suitable for the management of an electrically power assisted tricycle are described. This vehicle uses a photovoltaic module as a source of electric energy for the battery recharging. In this work, an overview on the needs of sustainable mobility and on the commercial electrically power assisted velocipedes is presented. The electrical rickshaw prototype, developed in the SDELab laboratory of the University of Palermo, is presented in detail, underlining the design, implementation and developing phases of the photovoltaic charging system assembled on the velocipede. Moreover, tests oriented on the setting u…
A measurement setup for electric bicycles powered from renewable energy sources
2014
In this paper a measurement system for a pedalassist rickshaw is described. It has been designed and realized with the purpose of a deep analysis of operating time, range and general performance of the prototype vehicle. The three-wheel velocipede under test, developed in the SDES laboratory of the University of Palermo, is equipped with two battery packs, and a photovoltaic panel which is used to recharge one of the packs at a time. To further improve the autonomy of this mean, a fuel cell will be added as a power source, whose consequent improvement in performance could be easily investigated by the presented measurement setup. An Arduino board has been employed to receive and store all c…