Search results for "engineering.material"

showing 10 items of 2352 documents

Hydrothermal synthesis of nanostructured inorganic powders by a continuous process under supercritical conditions

2005

Abstract In this study, using a prototype of hydrothermal synthesis in subcritical and supercritical water working in a continuous way, nanometric ceramic precursors with perfectly defined composition are produced: spinel ferrites such as Fe2CoO4, TiO2 with anatase structure and also perovskite structures such as BaZrO3. The as-prepared powders are fully characterized by complementary experiments: X-ray diffraction, electron microscopies, EDX spectrometry, surface area measurement, etc. Thus, particles size, morphology, aggregation state, crystal structure, composition are investigated. Moreover, magnetic properties of the ferrites products are studied. The powders obtained are pure phases …

AnataseMaterials scienceSpinelMineralogyengineering.materialSupercritical fluidGrain sizeChemical engineeringvisual_artX-ray crystallographyMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumengineeringHydrothermal synthesisCeramicPerovskite (structure)Journal of the European Ceramic Society
researchProduct

Genesis of chlorine and sulphur in fumarolic emissions at Vulcano Island (Italy): assessment of pH and redox conditions in the hydrothermal system

2002

Chlorine- and sulphur-bearing compounds in fumarole discharges of the La Fossa crater at Vulcano Island (Italy) can be modelled by a mixing process between magmatic gases and vapour from a boiling hydrothermal system. This allows estimating the compounds in both endmembers. Magma degassing cannot explain the time variation of sulphur and HCl concentrations in the deep endmember, which are more probably linked to reactions of solid phases at depth, before mixing with the hydrothermal vapours. Based on the P–T conditions and speciation of the boiling hydrothermal system below La Fossa, the HCl and Stot contents in the hydrothermal vapours were used to compute the redox conditions and pH of th…

AnhydriteAqueous solutionMineralogyengineering.materialFumaroleHydrothermal circulationchemistry.chemical_compoundGeophysicschemistryGeochemistry and PetrologyEnvironmental chemistryBoilingengineeringSeawaterPyriteParagenesisGeologyJournal of Volcanology and Geothermal Research
researchProduct

Anionic Organic Guests Incorporated in Zeolites: Adsorption and Reactivity of a Meisenheimer Complex in Faujasites

2005

Zeolites are suitable microporous hosts for positively charged organic species, but it is believed that they cannot adsorb organic anions. Pure Meisenheimer complex, derived from reduction of 2,4-dinitroaniline with NaBH4, was adsorbed inside faujasite cavities. Evidence for the internal incorporation of this negatively charged reaction intermediate comes from 1) XPS elemental analysis as a function of the depth of penetration into the particle, 2) the remarkable blue shift in lambda(max) of the Meisenheimer complex adsorbed on zeolite (ca. 470 nm) as compared to that in acetonitrile (580 nm) and 3) from the lack of reactivity with size-excluded hydride-acceptor reagents. Evidence is provid…

AnionsAniline CompoundsMolecular StructurebiologyChemistryOrganic ChemistryInorganic chemistryGeneral ChemistryReaction intermediateMicroporous materialFaujasiteengineering.materialCatalysisMeisenheimer complexAdsorptionZeolitesbiology.proteinengineeringReactivity (chemistry)AdsorptionZeoliteOxidation-ReductionOrganic anionChemistry - A European Journal
researchProduct

Natural Compounds as Sustainable Additives for Biopolymers

2020

In the last few decades, the interest towards natural compounds, coming from a natural source and biodegradable, for biopolymers is always increasing because of a public request for the formulation of safe, eco-friendly, and sustainable materials. The main classes of natural compounds for biopolymers are: (i) naturally occurring fillers (nFil), such as nano-/micro- sized layered alumino-silicate: halloysite, bentonite, montmorillonite, hydroxyapatite, calcium carbonate, etc.; (ii) naturally occurring fibers (nFib), such as wood and vegetable fibers; (iii) naturally occurring antioxidant molecules (nAO), such as phenols, polyphenols, vitamins, and carotenoids. However, in this short review, …

AntioxidantPolymers and Plasticsmedicine.medical_treatmentbiopolymersReviewengineering.materialHalloysiteNatural (archaeology)lcsh:QD241-441chemistry.chemical_compoundnatural fiberslcsh:Organic chemistrybiopolymermedicineOrganic chemistryPhenolsnatural antioxidantsnatural fillerSettore CHIM/06 - Chimica OrganicaGeneral Chemistrynatural fibernatural fillersSettore ING-IND/22 - Scienza E Tecnologia Dei MaterialiMontmorilloniteCalcium carbonatechemistryPolyphenolBentoniteengineeringPolymers
researchProduct

Effect of high levels of CO 2 on the electrochemical behavior and the enzymatic and non‐enzymatic antioxidant systems in black and white table grapes…

2019

[Bakghround]: In this study, we analyzed the effect of the application of high levels of CO2 (20 kPa CO2  + 20 kPa O2  + 60 kPa N2 ) for 3 days at low temperature on a white table-grape cultivar (Superior Seedless) in comparison with a black one (cv. Autumn Royal) in terms of quality parameters. We also used a solid-state voltammetry methodology to analyze the effect of the 3-day gaseous treatment in berry tissues from both cultivars in the first stage of storage. We determined the role of the non-enzymatic (total phenols, total anthocyanins, and antioxidant activity) and the enzymatic antioxidant (catalase (GCAT), ascorbate peroxidase (VcAPX) gene expression) systems in the behaviors of bo…

AntioxidantTotal phenolics030309 nutrition & dieteticsTotal anthocyaninsmedicine.medical_treatmentBerryengineering.material03 medical and health scienceschemistry.chemical_compound0404 agricultural biotechnologymedicineFood sciencePhenolsCultivar0303 health sciencesNutrition and DieteticsbiologyPulp (paper)fungiTable grapeSolid state voltammetryfood and beverages04 agricultural and veterinary sciencesCatalase040401 food sciencechemistryCatalaseVitis viniferabiology.proteinengineeringAscorbate peroxidaseAgronomy and Crop ScienceFood ScienceBiotechnologyPeroxidaseJournal of the Science of Food and Agriculture
researchProduct

Biothiols, taurine, and lipid-soluble antioxidants in the edible pulp of Sicilian cactus pear (Opuntia ficus-indica) fruits and changes of bioactive …

2005

Biothiols, taurine, and flavonols, as well as tocopherols and carotenoids have been assessed in the edible pulp of Sicilian red (Sanguigna), yellow (Surfarina), and white (Muscaredda) cultivars of cactus pear. The yellow cultivar has the highest level of reduced glutathione (GSH, 8.1 +/- 0.78 mg/100 g pulp), whereas the white cultivar showed the highest amount of cysteine (1.21 +/- 0.12 mg/100 g pulp). Taurine accounted for 11.7 +/- 1.0 mg/100 g in the yellow pulp, while lower levels were measured in the others. With the exception of kaempferol in the yellow cultivar (2.7 +/- 0.2 microg/100 g pulp), the edible pulp of cactus pear was not a source of flavonols. Very low amounts of lipid-solu…

AntioxidantbiothiolflavonolFood HandlingTaurinemedicine.medical_treatmentTocopherolsindustrial juice.engineering.materialAntioxidantsBeverageschemistry.chemical_compoundFlavonolsstomatognathic systemSpecies SpecificityBotanymedicinebiothiols; taurine; flavonols; tocopherols; carotenoids; cactus pear fruit; industrial juice.TocopherolFood scienceCysteineSulfhydryl CompoundsCarotenoidchemistry.chemical_classificationPEARVitamin EPulp (paper)food and beveragesOpuntiaGeneral ChemistrytocopherolCarotenoidsGlutathioneLipidscarotenoidcactus pear fruitstomatognathic diseaseschemistrySolubilityFruitengineeringGeneral Agricultural and Biological SciencesKaempferolOxidation-ReductionJournal of agricultural and food chemistry
researchProduct

Identifying the Unknown Content of an Ancient Egyptian Sealed Alabaster Vase from Kha and Merit’s Tomb Using Multiple Techniques and Multicomponent S…

2020

This article highlights the multianalytical study of exuded liquid from an ancient Egyptian sealed alabaster vase by Master's students in an applied chemistry for cultural heritage course. Master students are introduced to the field of Archaeometry that see the collaboration of experts in different areas of research such as conservators, curators of museums, physicists, chemists, etc. The sample is a residue exuded on the linen strip sealing an ancient Egyptian alabaster vase (inventory number S.8448) from the collection of the Museo Egizio in Turin (Italy). The students start to plan the noninvasive investigation by X-ray fluorescence (XRF), transmission electron microscopy (TEM), and ener…

Applications of ChemistrySample (material)Graduate Education/ResearchArt historyengineering.material01 natural sciencesAnalytical ChemistryEducationArchaeological scienceProblem Solving/Decision MakingReference standardsSettore CHIM/02 - Chimica Fisica010405 organic chemistry05 social sciences050301 educationGeneral ChemistryUpper-Division UndergraduateInventory Number0104 chemical sciencesCharacterization (materials science)Cultural heritageAlabasterCollaborative/Cooperative LearningengineeringBrown colorInstrumental Methods0503 educationInterdisciplinary/MultidisciplinaryJournal of Chemical Education
researchProduct

Conversion electron Mössbauer study of low carbon steel polarized in aqueous sulfate and sulfite containing sulfate solutions

1993

Abstract The passivation of low carbon steel was studied in aqueous solutions of 0.5 M Na 2 SO 4 (pH = 3.5 and 6.5) and of 0.5 M Na 2 SO 4 + 0.001 M NaHSO 3 (pH 3.5 and 6.5). The used conversion electron Mossbauer spectroscopy (CEMS) with the complementary electrochemical, microscopic and spectrophotometric investigations proved that the presence of sulfite ion induces pitting corrosion. The compositions and thichnesses of the passive films formed during the electrochemical treatments are determined from the conversion electron Mossbauer spectra. γ-FeOOH was found in each case as a major component. At pH = 3.5, the sextet belonging to Fe 3 C appears in the spectra in most cases, and also Fe…

Aqueous solutionCarbon steelGeneral Chemical EngineeringInorganic chemistryengineering.materialElectrochemistrychemistry.chemical_compoundSulfitechemistryConversion electron mössbauer spectroscopyMössbauer spectroscopyElectrochemistryengineeringPitting corrosionSulfateElectrochimica Acta
researchProduct

Influence of the dissolution of MnS inclusions under free corrosion and potentiostatic conditions on the composition of passive films and the electro…

2006

Abstract The influence of the dissolution of MnS inclusions at the OCP value and 400 mV versus SCE on the chemical composition of passive films and the electrochemical behaviour of resulfurized austenitic stainless steel was studied in 1 M NaClO 4 , pH 3, solution using SIMS, XPS, electrochemical impedance spectroscopy and the electrochemical microcell technique. The electrochemical dissolution (at 400 mV versus SCE) of inclusions occurred uniformly along the interface and this process was almost complete after 25 min immersion. A small amount of sulfur was detected on the matrix that exhibited a wide passive range. By contrast, the dissolution process under free corrosion was not uniform a…

Aqueous solutionChemistryGeneral Chemical EngineeringMetallurgyengineering.materialElectrochemistryCorrosionDielectric spectroscopyAdsorptionX-ray photoelectron spectroscopyChemical engineeringElectrochemistryengineeringAustenitic stainless steelDissolutionElectrochimica Acta
researchProduct

Mass Action Model Applied to the Thermodynamic Properties of Transfer of Nonionic Copolymers from Water to the Aqueous Surfactant Solutions

2003

A thermodynamic model which enables the properties of aqueous copolymer/surfactant mixtures to be fit quantitatively was proposed. Namely, a relationship between the properties of transfer of the unassociated copolymer from water to the aqueous surfactant solutions (DeltaY(t)) and the surfactant concentration was derived. The model was based on the idea that AY, can be expressed in terms of the following contributions: (1) interaction between monomers of copolymer and surfactant, (2) displacement of the monomer-micelle equilibrium induced by the copolymer, (3) formation of the surfactant-copolymer aggregation complex, and (4) formation of the mixed micelles. Such a model was applied to most…

Aqueous solutionChemistryInorganic chemistrySurfaces Coatings and FilmsCondensed Matter::Soft Condensed MatterThermodynamic modelPulmonary surfactantChemical engineeringMaterials ChemistryCopolymerPhysics::Chemical PhysicsPhysical and Theoretical ChemistryAction modelPolyethylene oxides Micelles scattering DLSThe Journal of Physical Chemistry B
researchProduct