Search results for "engineering.material"
showing 10 items of 2352 documents
An ESCA and Mössbauer study of the oxide layer formed on steel in water containing chromate and chloride ions
1983
Abstract The formation of oxidic layers on steel in chromate solutions was studied by photo-electron and Mossbauer spectroscopy. To simulate more aggressive realistic systems, some chloride ions were added to the solution. The layers formed under these conditions were found to be thicker by an order of magnitude than those formed in the absence of chloride ions. They probably consist of ferric and chromic oxides of the corundum type (Fe 1−2 Cr x ) 2 O 3 , with the Cr : Fe ratio being depth dependent. The oxide layer is subdivided into small regions behaving superparamagnetically. This heterogeneity of the layer is ascribed to the attack by the chloride ions. The structure of the oxides foun…
Towards a revisitation of vesuvianite-group nomenclature: the crystal structure of Ti-rich vesuvianite from Alchuri, Shigar Valley
2016
Vesuvianite containing 5.85 wt% TiO2from an Alpine-cleft-type assemblage outcropped near Alchuri, Shigar Valley, Northern Areas, has been investigated by means of electron microprobe analyses, gas-chromatographic analysis of H2O, X-ray powder diffraction, single-crystal X-ray structure refinement,27Al NMR,57Fe Mössbauer spectroscopy, IR spectroscopy and optical measurements. Tetragonal unit-cell parameters are:a= 15.5326 (2),c= 11.8040 (2) Å, space groupP4/nnc. The structure was refined to finalR1= 0.031,wR2= 0.057 for 11247I> 2σ(I). A general crystal-chemical formula of studied sample can be written as follows (Z= 2):[8–9](Ca17.1Na0.9)[8]Ca1.0[5](Fe2+0.44Fe3+0.34Mg0.22)[6](Al3.59Mg0.41)…
Gas chromatographic and mass spectrometric analysis of chlorinated catechols occurring in pulp bleach liquors
1982
Chlorination step (C-step), spent bleach liquor from a kraft pulp mill and the product from the chlorination of guaiacol in aqueous solution have been investigated for their content of chlorinated catechols. After separation the samples were derivatized with diazoethane and analysed by glass capillary gas chromatography with an electron capture detector. The external standard mixture of all ethylated chlorocatechols was used in the measurements. The structures of the compounds identified were confirmed by gas chromatography/mass spectrometry. Eight chlorinated catechols were identified from a sample prepared by chlorination of guaiacol with Cl2 in aqueous solution. However, only four of the…
Alcoholic nanolime dispersion obtained by the insolubilisation-precipitation method and its application for the deacidification of ancient paper
2017
Abstract Nanolime dispersions for the deacidification of ancient paper constitute a valid alternative to the lime traditional ones. Their efficacy depends on particles size, polydispersity and agglomeration that can be controlled depending on the preparation method. In this work, nanolime preparation by insolubilisation-precipitation method is reported. Nanoparticles dispersed in a water-isopropanol mixture were obtained without any manipulation of the dispersion. The stability of the dispersion together with particle size and morphology were found to be dependent on water to isopropanol molar ratio and on the synthesis temperature. One of the dispersion was applied on a manuscript to asses…
Thermomagnetic Properties Improved by Self-Organized Flower-Like Phase Separation of Ferromagnetic Co2Dy0.5Mn0.5Sn
2012
A thermodynamically stable phase separation of Co2Dy0.5Mn0.5Sn into the Heusler compound Co2MnSn and Co8Dy3Sn4 is induced by rapid cooling from the liquid phase. The phase separation forms an ordered flower-like structure on the microscale. The increased scattering of phonons at the phase boundaries reduces the thermal conductivity and thus improves thermoelectric and spincaloric properties.
Determination of SiO 2 in lime mud by gravimetry
1999
A simple and rapid method for the determination of SiO2 in lime mud used in current sulfate pulping practice is reported. The lime mud samples are treated three times with 2.5 mL of 6 mol/L hydrochloric acid. The samples are nearly evaporated to dryness two times and the third time to complete dryness. To determine the exact SiO2 content of the residue, it is treated with an excess of concentrated hydrofluoric acid and a little hydrochloric acid, and the silica is expelled as volatile silicon tetrafluoride. The sample treatments take about 1.5 h and the heating periods take a total of about 3.5 h. The SiO2 results were evaluated by analyzing National Institute of Standards and Technology St…
Characterization of high molecular mass material in ECF and TCF bleaching liquors by Py-GC/MS with and without TMAH methylation
2006
Abstract High molecular weight (HMW) fractions (MW > 1000) of effluents were obtained by ultrafiltration of elemental chlorine-free (ECF) bleaching (O-D-EOP-D-ED) and totally chlorine-free (TCF) bleaching (O-Z-Q-P-Z-Q-P-P) liquors of softwood (Pinus sylvestris) pulp. The fractions were studied by analytical pyrolysis coupled to gas chromatography/mass spectrometry (Py-GC/MS) with and without TMAH (tetramethyl ammonium hydroxide) derivatization. The pyrograms showed a number of pyrolysis products mainly derived from lignin and carbohydrates. The comparison of 4-hydroxyphenyl (H), guaiacyl (G) and syringyl (S) lignin units in both bleaching effluents showed that the G unit content was clearly…
Packings and stationary phases for biopolymer separations by HPLC
1987
Packings and stationary phases applied to high resolution separations of proteins, enzymes, and nucleic acids must satisfy a series of distinct criteria that are different from those usually required by HPLC of low molecular weight non-biologically active analytes. These requirements have been met through substantial improvements in classical gel media together with novel developments in silica supports, and have led to a family of products with tailor-made and reproducible properties. Supports consisting of cross-linked organic gels, and inorganic materials (mostly silicas) are now available with graduated particle sizes, pore sizes, porosities and surface areas as well as non-porous beads…
Identification of diterpenes in canvas painting varnishes by gas chromatography-mass spectrometry with combined derivatisation.
2004
A derivatisation method that combines the formation of ethyl esters from the carboxylic groups and trimethylsilyl ethers from hydroxyl groups of the components of diterpenic resins is presented in this paper. This methodology involves two experimental steps: (1) formation of ethyl esters using ethyl chloroformate; and (2) the esterified compounds are lead to react with trimethylsilylimidazole to form the corresponding trimethylsilyl ethers. The main advantage of the proposed method is the possibility of performing simultaneously the analysis of amino acids from proteins, fatty acids from drying oils, and diterpenic compounds from natural resins usually found in works of art. This methodolog…
Chromium liquid waste inertization in an inorganic alkali activated matrix: Leaching and NMR multinuclear approach
2015
A class of inorganic binders, also known as geopolymers, can be obtained by alkali activation of aluminosilicate powders at room temperature. The process is affected by many parameters (curing time, curing temperature, relative humidity etc.) and leads to a resistant matrix usable for inertization of hazardous waste. In this study an industrial liquid waste containing a high amount of chromium (≈ 2.3 wt%) in the form of metalorganic salts is inertized into a metakaolin based geopolymer matrix. One of the innovative aspects is the exploitation of the water contained in the waste for the geopolymerization process. This avoided any drying treatment, a common step in the management of liquid ha…