Search results for "fiber optics"
showing 10 items of 87 documents
Evaluation of performance of a hybrid electro-optic directional coupler and a Mach–Zehnder switch
2017
The efficiency of an electro-optic (EO) directional coupler (DC) and a Mach–Zehnder (MZ) switch is discussed. The specific designs employ a passive waveguide core and an EO cladding. The performance of a DC switch was evaluated by numerical methods, namely coupled mode theory (CMT), eigenmode expansion (EME) method, and beam envelope method. Using the CMT and EME methods, it is shown that in the DC with a passive waveguide core and EO cladding at certain waveguide parameters the switching effect does not take place. The effect is demonstrated for the first time and suggests that careful optimization of the DC switch should be done before experimental realization of the device. The efficienc…
All-optical regeneration of polarization of a 40 Gbit/s return-to-zero telecommunication signal
2013
International audience; We report all-optical regeneration of the state of polarization of a 40 Gbit/s return-to-zero telecommunication signal. The device discussed here consists of a 6.2-km-long nonzero dispersion-shifted fiber, with low polarization mode dispersion, pumped from the output end by a backward propagating wave coming from either an external continuous source or a reflection of the signal. An initially scrambled signal acquires a degree of polarization close to 100% toward the polarization generator output. All-optical regeneration is confirmed by means of polarization and bit-error-rate measurements as well as real-time observation of the eye diagrams. We show that the physic…
On-chip generation of high-dimensional entangled quantum states and their coherent control
2017
Optical quantum states based on entangled photons are essential for solving questions in fundamental physics and are at the heart of quantum information science1. Specifically, the realization of high-dimensional states (D-level quantum systems, that is, qudits, with D > 2) and their control are necessary for fundamental investigations of quantum mechanics2, for increasing the sensitivity of quantum imaging schemes3, for improving the robustness and key rate of quantum communication protocols4, for enabling a richer variety of quantum simulations5, and for achieving more efficient and error-tolerant quantum computation6. Integrated photonics has recently become a leading platform for the co…
Origin of the visible absorption in radiation-resistant optical fibers
2013
In this work we investigated the point defects at the origin of the degradation of radiation-tolerant optical fibers used in the visible part of the spectrum for plasma diagnostics in radiation environments. For this aim, the effects of γ -ray irradiation up to the dose of 10 MGy(SiO2) and post-irradiation thermal annealing at 550◦C were studied for a Fluorinedoped fiber. An absorption peaking around 2 eV is mainly responsible for the measured radiation-induced losses, its origin being currently debated in the literature. On the basis of the unchanging shape of this band with the radiation dose, its correlation with the 1.9 eV photoluminescent band and the thermal treatment results we assig…
Photonic fractional Fourier transformer with a single dispersive device
2013
In this work we used the temporal analog of spatial Fresnel diffraction to design a temporal fractional Fourier transformer with a single dispersive device, in this way avoiding the use of quadratic phase modulators. We demonstrate that a single dispersive passive device inherently provides the fractional Fourier transform of an incident optical pulse. The relationships linking the fractional Fourier transform order and scaling factor with the dispersion parameters are derived. We first provide some numerical results in order to prove the validity of our proposal, using a fiber Bragg grating as the dispersive device. Next, we experimentally demonstrate the feasibility of this proposal by us…
Radiation tolerant fiber Bragg gratings for high temperature monitoring at MGy dose levels
2014
International audience; We report a method for fabricating fiber Bragg gratings (FBG) resistant to very severe environments mixing high radiation doses (up to 3 MGy) and high temperatures (up to 230 degrees C). Such FBGs have been written in two types of radiation resistant optical fibers (pure-silica and fluorine-doped cores) by exposures to a 800 nm femtosecond IR laser at power exceeding 500 mW and then subjected to a thermal annealing treatment of 15 min at 750 degrees C. Under radiation, our study reveals that the radiation induced Bragg wavelength shift (BWS) at a 3 MGy dose is strongly reduced compared to responses of FBGs written with nonoptimized conditions. The BWS remains lower t…
Fabrication and Characterization of Polymeric Optical Waveguides Using Standard Silicon Processing Technology
2005
We report the fabrication and characterization of a rib polymeric waveguide having a thick layer of oxidized porous silicon as an innovative solution for the lower cladding. The waveguide was fabricated using standard silicon substrates and Si-based technology. The multimodal guiding structure has a polymethylmetacrylate (PMMA) core and the innovative lower cladding was obtained by thermal oxidation of a porous silicon layer. The waveguide does not have the upper cladding. Propagation loss measurements were performed at 1.48 /spl mu/m using the cut-back method. We obtained propagation loss of about 1.7 dB/cm, confirming the possibility to use the porous silicon oxide as the lower cladding l…
Kerr self-cleaning of pulsed beam in an ytterbium doped multimode fiber
2017
International audience; We experimentally demonstrate that Kerr spatial self-cleaning of a pulsed beam can be obtained in an amplifying multimode optical fiber. An input peak power of 500 W only was sufficient to produce a quasi-single-mode emission from the double-clad ytterbium doped multimode fiber (YMMF) with non-parabolic refractive index profile. We compare the self-cleaning behavior observed in the same fiber with loss and with gain. Laser gain introduces new opportunities to achieve spatial self-cleaning of light in multimode fibers at a relatively low power threshold.
Ultra-short pulse propagation in birefringent fibers-the projection operator method
2008
International audience; We examine the propagation of ultra-short optical light pulses in dispersion-managed birefringent fiber transmission systems, in which the pulse dynamics is governed by the coupled higher-order nonlinear Schrödinger equations with higher-order linear and nonlinear optical effects. We derive the equations of motion in terms of pulse parameters such as amplitude, temporal position, width, chirp, frequency and phase, using a projection operator method, and we obtain the spatial dynamical behavior of picosecond and femtosecond pulse parameters. From our detailed analysis, we show that the stimulated Raman scattering has a strong impact on the pulse dynamics.
Extreme statistics in Raman fiber amplifiers : influence of pump depletion and dispersion
2010
OSA 2010 NonLinear Photonics Best Student Poster Award; International audience; We experimentally and theoretically investigate the influence of pump depletion effects on extreme statistics observed in fiber Raman amplifiers. We also report on the impact of the dispersion of the fiber.