Search results for "fiber"

Atmospheric aging and surface degradation in As2S3 fibers in relation with suspended-core profile

2015

Abstract Microstructured optical fibers (MOF) can be seen as next generation fiber of significance in advancing the compact optics because of its excellent compatibility in integrated optics. However, the degradation of their physicochemical properties limits their efficiency and lifetime. Atmospheric moisture is responsible for the degradation of amorphous systems especially chalcogenide glasses. In the light of previously reported studies, in order to clarify the aging process continuously evolving in sulfide microstructured optical fiber over time, a detailed investigation of this phenomenon has been conducted. The time-dependent transmission and glass chemical deterioration have been st…

Chalcogenide Fibers for Mid-IR Light Generation: Potentialities and Drawbacks of the Microstructured Design in Sulfide Waveguides

2014

We study optical and structural aging in As2S3 microstructured optical fibers, submitted to room atmosphere that may have, among others, an impact on mid-infrared supercontinuum generation.

Effect of the elongational flow on morphology and properties of polypropylene/graphene nanoplatelets nanocomposites

2018

Abstract In this work the effect of the presence of graphene nanoplatelets (GnP) on the morphology and mechanical properties of polypropylene/GnP nanocomposites has been investigated when these polymer systems are subjected to non-isothermal elongational flow in a melt spinning operation. The presence of the GnP magnifies the effect of the elongational flow. Indeed, the elastic modulus and the tensile strength of nanocomposites increases with the orientation more than that observed for the pure matrix. Moreover, the elongation at break increases at low values of the draw ratio for the nanocomposites, while, the matrix shows the expected decrease in deformability. These effects have been cor…

Improving the properties of polypropylene–wood flour composites by utilization of maleated adhesion promoters

2007

Polymer composites filled with natural organic fillers have gained a significant interest during the last few years, because of several advantages they can offer compared with properties of inorganic-mineral fillers. However, these composites (based, in most cases, on polyolefins) often show a reduction in some mechanical properties. This is mainly due to the problems regarding dispersion of the polar filler particles in the non-polar polymer matrix and their interfacial adhesion with polymer chains. In this work, polypropylene-wood flour composites were prepared and the effect of the addition of a maleated polypropylene was investigated. The two materials were compounded by an industrial c…

1984

The fiber patterns of a series of liquid crystalline polymers were analysed. For polymers with smectic phases and for polymers with long spacers and nematic phases, the mesogenic groups orient perpendicularly to the polymer main chains which are parallel to the fiber axis. The fiber pattern indicate a short range order of the mesogenic groups analogous to that in low-molecular weight liquid crystals. For polymers with short spacer groups and nematic phases qualitatively different fiber patterns are found. These fiber patterns are indicative for a special nematic phase formed by ribbon-like molecules.

Development of core-shell colloids to study self-diffusion in highly concentrated dispersions

2007

To study single particle motion in highly concentrated colloidal dispersions, a host-tracer colloid system was developed, consisting of crosslinked polymer micronetwork spheres placed in a good solvent. The host colloid is made invisible to the experimental probe by matching its refractive index to that of the solvent. For the tracer particles a core-shell structure was chosen to ensure the interaction potential to be identical to that of the host particles. Therefore the shell was made of the same polymer as the host. The core differs in refractive index from the solvent and is therefore visible due to scattered light.

Measurement of the strain-optic coefficients of PMMA from 800 to 2000 nm

2020

The strain-optic coefficients of PMMA are measured in a broad wavelength range from 800 to 2000 nm. The sensitivity of the azimuthal whispering gallery mode resonances to the strain is exploited to measure the strain-optic coefficients of PMMA micro-rods. The technique is based on measuring the wavelength shift of the resonances of both polarizations states, the TE and TM, when an axial strain is applied to the polymer rods. This method enables the determination of the strain-optic coefficients of the material in a broad wavelength range. In particular, in the near-infrared range, the PMMA exhibits negligible dispersion and anisotropy, and the strain-optic coefficients show constant values …

Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch Biocomposites

2007

Natural fiber reinforced starch polymers are processed by compression molding. Potato, sweet potato, and corn starch are used as matrices. Three types of natural fibers, namely sisal, jute, and cabuya, are used in concentrations varying from 2.5 to 12.5% w/w in the composites. Different plasticizers are used for the starch polymers, such as water and glycerol. Mechanical properties are assessed by tensile and impact tests. In both cases, improved mechanical properties are obtained at increasing fiber contents. Tensile strength appears to be markedly improved with the addition of 10% by weight of sisal fibers, while the best results for impact strength are obtained for cabuya fibers.

Steel Fibres: Effective Way to Prevent Failure of the Concrete Bonded with FRP Sheets

2016

Although the efficiency of steel fibres for improving mechanical properties (cracking resistance and failure toughness) of the concrete has been broadly discussed in the literature, the number of studies dedicated to the fibre effect on structural behaviour of the externally bonded elements is limited. This experimental study investigates the influence of steel fibres on the failure character of concrete elements strengthened with external carbon fibre reinforced polymer sheets. The elements were subjected to different loading conditions. The test data of four ties and eight beams are presented. Different materials were used for the internal bar reinforcement: in addition to the conventiona…

Investigation on the indentation behavior of sandwich beams using crushable and hyperelastic foam cores

2010

In this work the indentation behaviour of sandwich beams is studied adopting the classical approach representing the core material as a Winkler-type foundation. It is shown how most of the proposed theories can be derived from a general fourth order linear differential equation expressing the equilibrium of the indented beam skin. Different assumptions on the supporting boundary constraints and materials constitutive behaviour, lead to simplifications of the general equation and to the prediction of different indentation features. An extension of the Segment-Wise approach recently proposed in the literature is in particular presented with potential to better simulate foam cores with markedl…