Search results for "fibres"
showing 10 items of 122 documents
Predicting stiffness and strength of birch pulp:Polylactic acid composites
2016
This paper studies failure of birch pulp–polylactic acid composites. Stiffness and strength are calculated using the theory of short fibre composites and the results are compared to experimental data. The results differed from the experimental values by 0–6%. With less aligned fibres the short fibre theory is not feasible. The performance of the 40 wt% birch pulp – polylactic acid composite is predicted with X-ray microtomography based finite element modelling, and the results are compared with experiments. Stiffness results differed from experiments by 1–17% . By adding into the models a third material phase representing the interface between the fibres and the matrix, the stress–strain c…
Thermal kinetics for the energy valorisation of polylactide/sisal biocomposites
2018
[EN] The thermal stability and decomposition kinetics of PLA/sisal biocomposites was discussed to evaluate the suitability of their use in energy recovery processes such as pyrolysis and combustion. The influence of the addition of sisal up to 30%wt, the presence of coupling agent, and the atmosphere of operation, i.e. inert or oxidative was discussed by means of multi-rate linear non-isothermal thermogravimetric experiments. All biocomposites showed a mean high heating value of 15 MJ/kg indicating their suitability for energy recovery processes. The thermal requirements of PLA/sisal decomposition were assessed in terms of onset decomposition temperature and apparent activation energy. A mi…
Advanced microscopy analysis of the micro-nanoscale architecture of human menisci
2019
AbstractThe complex inhomogeneous architecture of the human meniscal tissue at the micro and nano scale in the absence of artefacts introduced by sample treatments has not yet been fully revealed. The knowledge of the internal structure organization is essential to understand the mechanical functionality of the meniscus and its relationship with the tissue’s complex structure. In this work, we investigated human meniscal tissue structure using up-to-date non-invasive imaging techniques, based on multiphoton fluorescence and quantitative second harmonic generation microscopy complemented with Environmental Scanning Electron Microscopy measurements. Observations on 50 meniscal samples extract…
Fibre break processes in unidirectional composites
2014
International audience; A model to predict the effects of the accumulation of fibre breakages in unidirectional carbon fibre composites has been developed that takes into account several physical phenomena controlling fibre failure, including the stochastic nature of fibre strength, stress transfer between fibres due to the shear of the matrix, interfacial debonding and viscosity of the matrix. The damage processes leading up to failure are discussed and quantified, first in terms of fibre breaks for the case of monotonically increasing tensile loading, then for sustained loading and finally the implications for more complex loads and structures are discussed. It is clearly shown that the f…
Quasi-static behaviour and damage assessment of flax/epoxy composites
2015
Experimental investigations were conducted on flax and E-glass fibres reinforced epoxy matrix composites subjected to quasi-static loadings. Flax/epoxy samples having [0]12, [90]12, [0/90]3S and [±45]3S stacking sequences, with a fibre volume fraction of 43% have been tested under tension, compression and in-plane shear loadings. Overall, the compression strength of glass/epoxy was 76% greater than for the flax/epoxy composite. The damage evolution of flax/epoxy of [0/90]3S and [±45]3S samples has been evaluated in terms of transverse crack densities with respect to the load increment. The crack density exhibited a classical “S” shaped pattern for [0/90]3S and linearly for [±45]3S specimens…
Degradation mechanisms under hydro-thermo-mechanical loads of natural fibers-reinforced biocomposites : application to the development of lightweight…
2018
With the current environmental concerns, research turns to alternative solutions to synthetic fibres. Vegetal fibers appears as good candidates, with good mechanical properties. However, their low durability is a major issue, especially when the composites are exposed to hydro(hygro)thermal loadings.The purpore of this thesis is to analyse and understand the degradation mechanisms when hydro-thermo-mechanical loadings are applied, in order to implement a predictive modelisation of the composite durability.The manufacturing process wasstudied and optimised to produce reproducible and strong composites. Two materials were produced. Their only difference is their volumetric fiber contents (37.…
COMPARISON OF CRIMSON FOUNTAINGRASS AND DISS FIBRES AS AGGREGATES FOR CEMENT MORTARS
2019
The use of natural fibres in cement composites is an expanding research field as their use can improve the mechanical and thermal behavior of cement mortars and reduce their carbon footprint. In this paper two different wild grasses, i.e. Pennisetum Setaceum, also known as crimson fountaingrass, and Ampelodesmos Mauritanicus, also called diss, are used as source of natural fibres for cement mortars. The principal aim is to evaluate the possibility of using the more invasive crimson fountaingrass in place of diss inside cement based vegetable concrete. The two plants’ fibres have been characterized by means of electron microscopy, helium picnometry; moreover, the thermal conductivity of fibr…
Activity of laccase on unbleached and bleached thermomechanical pulp
2003
The introduction of value-added properties to pulp fibres is an attractive proposition. One interesting option is targeted modification of fibre surfaces by enzymatic activation. In this work, the activity of laccase on pulp and pulp fractions from thermomechanical pulp (TMP) and peroxide bleached TMP was studied on the basis of consumption of the co-substrate oxygen in the reaction and by studying the formation of radicals in the pulp material as analysed by electron paramagnetic resonance spectroscopy (EPR). Laccases obtained from Trametes hirsuta and Myceliophthora thermophila were used in the study. Laccases were found to be active on pulp material of unbleached TMP, whereas only fines …
Technical design of the phase I Mu3e experiment
2021
Nuclear instruments & methods in physics research / A 1014, 165679 (2021). doi:10.1016/j.nima.2021.165679
Properties evolution of flax/epoxy composites under fatigue loading
2014
International audience; The tension-tension fatigue behaviour of flax fibre reinforced epoxy matrix composites have been investigated for specimens having [0]12, [90]12, [0/90]3S and [±45]3S lay-ups. The Probabilized Stress-Number of cycles (P-S-N) curves have been determined for each laminate type. The measured stress and strain data allowed to quantify the evolution of the mechanical properties, i.e. stiffness, damping and permanent strain as a function of imposed cycles. Especially, the stiffening phenomenon of flax reinforcements oriented parallel to the loading direction has been confirmed. However, due to the competition between damage development and the fibre stiffening, the increas…