Search results for "fluid"
showing 10 items of 5513 documents
On the hydraulic behaviour of ITER Shield Blocks #14 and #08. Computational analysis and comparison with experimental tests
2016
Abstract As a consequence of its position and functions, the ITER blanket system will be subjected to significant heat loads under nominal reference conditions. Therefore, the design of its cooling system is particularly demanding. Coolant water is distributed individually to the 440 blanket modules (BMs) through manifold piping, which makes it a highly parallelized system. The mass flow rate distribution is finely tuned to meet all operation constraints: adequate margin to burn out in the plasma facing components, even distribution of water flow among the so-called plasma-facing “fingers” of the Blanket First Wall panels, high enough water flow rate to avoid excessive water temperature in …
Two-phase flow of liquid–liquid mixture in the range of the water droplet pattern
2002
Abstract Phenomena accompanying flow of water–oil mixture during droplet flow of water in oil have been described. Aims used in the determination of characteristic parameters in two-phase liquid–liquid flow have been presented. The method for calculating the equivalent viscosity and pressure drop during flow of liquid–liquid mixture in the range of the water droplet pattern has been given.
CFD Modelling of the Demister in the Multi Stage Flash Desalination plant
2011
Abstract Demisters are used to remove entrained brine droplets from flashed off vapor within the flashing stages of the multi stage flash desalination process (MSF). This is necessary to prevent accumulation of brine droplets on the outside surface of the condenser tubes and contamination of the desalinated water. The aim of this work is to design a new demister with lower pressure drop and unaffected separation efficiency which can be later installed in the flashing stages of the MSF plant and causes reduction in the required heat transfer area. In this work the demister performance is predicted as a function of design (wire diameter), and operating parameters (stage temperature). This obj…
Control of VOC emissions from a flexographic printing facility using an industrial biotrickling filter.
2011
The study of an industrial unit of biotrickling filter for the treatment of the exhaust gases of a flexographic facility was investigated over a 2-year period with the objective to meet the volatile organic compound (VOC) regulatory emission limits. Increasing the water flow rate from 2 to 40 m3 h−1 improved the performance of the process, meeting the VOC regulation when 40 m3 h−1 were used. An empty bed residence time (EBRT) of 36 s was used when the inlet air temperature was 18.7 °C, and an EBRT as low as 26 s was set when the inlet temperature was 26.8 °C. During this long-term operation, the pressure drop over the column of the bioreactor was completely controlled avoiding clogging prob…
Modelling of an activated primary settling tank including the fermentation process and VFA elutriation
2002
A complete model of a primary settler including both sedimentation and biological processes is presented. It is a one-dimensional model based on the solids flux concept and the conservation of mass that uses the Takács model for the settling velocity, which is corrected by a compression function in the lower layers. The biological model is based on the ASM2 and enlarged with the fermentation model proposed by this research group. The settler was split in ten layers and the flux terms in the mass balance for each layer is obtained by means of the settling model. A pilot plant has been operated to study the primary sludge fermentation and volatile fatty acids (VFA) elutriation in a primary se…
Biological nitrogen and phosphorus removal in membrane bioreactors: model development and parameter estimation
2012
Membrane bioreactors (MBR) are being increasingly used for wastewater treatment. Mathematical modeling of MBR systems plays a key role in order to better explain their characteristics. Several MBR models have been presented in the literature focusing on different aspects: biological models, models which include soluble microbial products (SMP), physical models able to describe the membrane fouling and integrated models which couple the SMP models with the physical models. However, only a few integrated models have been developed which take into account the relationships between membrane fouling and biological processes. With respect to biological phosphorus removal in MBR systems, due to th…
Digital control circuitry of cancer cell and its apoptosis
2009
This study, through a typical aerospace systems architecture, suggests an engineering design of a human cancer cell circuitry in which a digital optimal control matrix is assigned to repair the DNA damage level and/or to trigger its apoptosis. Here, the conceived machinery is proposed taking into account the state of the art in cancer investigation. However, it could be further generalized. The most recent studies on cancer pathologies give a predominant role to the oncosuppressor protein p53 and its antagonist, the oncogene Mdm2. Experimental and theoretical approaches are in agreement in deducing a “digital” response of the p53 when genomic integrity is damaged. Once DNA damage is present…
Analysis Based Optimization of Human Powered Vehicle Body
2015
The human powered vehicle market is not only a larger market per unit than the automotive market, but it is one in growth. The main product of this market is the classical bicycle, which is familiar around the globe, but mainly in the urban environment. The bicycle, which in this paper will be considered a human powered vehicle, is slowly gaining ground in the field of urban transportation solutions. This paper analyzes the possibility of optimizing the body of a human powered vehicle recumbent tricycle through continuous fluid dynamics. The vehicle is already designed and built, and is fully functional. The body of the vehicle comes as a necessity to give the operator protection from the e…
IM-5 zeolite for steam catalytic cracking of naphtha to produce propene and ethene. An alternative to ZSM-5 zeolite
2013
Steam catalytic cracking of naphtha in smaller FCC units can be considered an option to produce more ethene and propene. These units will operate at high reaction temperatures and in the presence of steam. The profitability of these units could be improved with the use of new catalysts with higher activity and hydrothermal stability, without compromising the selectivity to light olefins. We have explored the possibilities of IM-5 zeolite for high temperature steam catalytic cracking (SCC) of a naphtha, as an alternative to commonly used ZSM-5 zeolite. So, we compare the catalytic activity, the effect of operating variables of the process and the yields of interest products between the two z…
Comparing the dynamic performance of wastewater treatment systems: A metafrontier Malmquist productivity index approach
2015
The assessment of productivity change of wastewater treatment plants (WWTPs) is essential to improve the performance over time of the facilities evaluated. This study assessed and compared the productivity growth of WWTPs operating with non-homogeneous technologies. The metafrontier Malmquist productivity index (MMPI) was computed for a sample of 99 WWTPs encompassing 4 alternative technologies: activated sludge (AS), aerated lagoon (AL), trickling filter (TF) and rotating biological contactor (BD). The results indicated that, on average, WWTPs with AS and BD exhibited better performance over time than WWTPs with AL and TF. The MMPI indicates that, over the period 2007-2009, the productivit…