Search results for "force microscopy"
showing 10 items of 247 documents
Seed‐Layer‐Free Atomic Layer Deposition of Highly Uniform Al 2 O 3 Thin Films onto Monolayer Epitaxial Graphene on Silicon Carbide
2019
Atomic layer deposition (ALD) is the method of choice to obtain uniform insulating films on graphene for device applications. Owing to the lack of out-of-plane bonds in the sp(2) lattice of graphene, nucleation of ALD layers is typically promoted by functionalization treatments or predeposition of a seed layer, which, in turn, can adversely affect graphene electrical properties. Hence, ALD of dielectrics on graphene without prefunctionalization and seed layers would be highly desirable. In this work, uniform Al2O3 films are obtained by seed-layer-free thermal ALD at 250 degrees C on highly homogeneous monolayer (1L) epitaxial graphene (EG) (amp;gt;98% 1L coverage) grown on on-axis 4H-SiC(00…
Room-Temperature Electrical Characteristics of Pd∕SiC Diodes with Embedded Au Nanoparticles at the Interface
2010
We investigate the effects of localized controlled nanometric inhomogeneities, represented by Au nanoparticles, on the electrical properties of Pd/SiC Schottky diodes. In particular, we investigate the effects of the nanoparticle radius R on the current-voltage characteristics. The main result concerns the strong dependence of the effective Schottky barrier height of the Pd/SiC contact on R, giving a practical technique to tailor, in a wide range, such a barrier height by simply changing the process parameters during the diode preparation. Then, from a basic understanding point of view, such data allow us to test the Tung model describing the effects of inhomogeneities on the electrical pro…
Surface AFM microscopy of unworn and worn samples of silicone hydrogel contact lenses
2008
Abstract: Purpose. To evaluate the qualitative and quantitative topographic changes in the surface of worn contact lenses (CLs) of different materials using atomic force microscopy (AFM). Methods. The topography of five different CL materials was evaluated withAFM over a surface of 25 lm2 according to previously published experimental setup. Average roughness (Ra) and root mean square (Rms) values were obtained for unworn and worn samples. Results. The Ra value increased for balafilcon A (11.62–13.68 nm for unworn and worn samples, respectively), lotrafilcon A (3.67–15.01 nm for unworn and worn samples, respectively), lotrafilcon B (4.08–8.42 nm for unworn and worn samples, respectively), g…
Supramolecular polymerization of electronically complementary linear motifs: anti-cooperativity by attenuated growth†
2021
Anti-cooperative supramolecular polymerization by attenuated growth exhibited by self-assembling units of two electron-donor benzo[1,2-b:4,5-b′]dithiophene (BDT) derivatives (compounds 1a and 1b) and the electron-acceptor 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) (compound 2) is reported. Despite the apparent cooperative mechanism of 1 and 2, AFM imaging and SAXS measurements reveal the formation of small aggregates that suggest the operation of an anti-cooperative mechanism strongly conditioned by an attenuated growth. In this mechanism, the formation of the nuclei is favoured over the subsequent addition of monomeric units to the aggregate, which finally results in short aggrega…
Nanostructural changes in dentine caused by endodontic irrigants
2013
Objective: To study nanostructural dentinal changes produced by endodontic irrigants. Study Design: Experimental study. Nanoindentations were performed on peritubular (PD) and intertubular dentine (ID) with an atomic force microscopy. Stiffness and adhesion force were determined before and after application of 5.25% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA). Normalized differences before and after treatment for stiffness and adhesion forces were calculated. A paired T-test was used to compare stiffnes and adhesion force before and after irrigants application. Results: After treatment with EDTA there was a 29.80% reduction in stiffness in ID and a 63.53% redu…
Thickness measurement of soft thin films on periodically patterned magnetic substrates by phase difference magnetic force microscopy
2013
The need for accurate measurement of the thickness of soft thin films is continuously encouraging the development of techniques suitable for this purpose. We propose a method through which the thickness of the film is deduced from the quantitative measurement of the contrast in the phase images of the sample surface acquired by magnetic force microscopy, provided that the film is deposited on a periodically patterned magnetic substrate. The technique is demonstrated by means of magnetic substrates obtained from standard floppy disks. Colonies of Staphylococcus aureus adherent to such substrates were used to obtain soft layers with limited lateral (a levy microns) and vertical (hundreds of n…
Preparation and properties of Tl2Ba2CaCu2O8 thin films
1994
Anex situ process has been developed to produce thin superconducting Tl2Ba2CaCu2O8 films. The properties of films grown on different substrates using different annealing regimes were studied. Critical temperatures of 103–107 K were measured on films prepared in a broad range of annealing temperatures on SrTiO3, LaAlO3, and Y-ZrO2 substrates. A critical current density,Jc, of 2×106 A/cm2 at 77 K was measured on LaAlO3. Film morphology was studied by SEM, AFM, and STM.
NC-AFM contrast formation on the calcite ($10\bar {1}4$) surface
2012
Calcite, the most stable polymorph of calcium carbonate, is one of the most abundant simple salts in the geological environment. Consequently, its natural cleavage plane has been studied extensively by a wide range of surface-sensitive techniques, giving indications for two reconstructions, namely a (2 × 1) and a so-called ‘row-pairing’ reconstruction. The existence of the (2 × 1) reconstruction has been discussed controversially in the literature, but is now confirmed as a true surface property. In contrast, a comprehensive discussion on the existence of the row-pairing reconstruction is lacking so far.Here, we present a non-contact atomic force microscopy (NC-AFM) study of the calcite s…
Measurements of SiO2glass surface parameters by methods of microscopy
2012
In this research we compare chemical and plasma treatment methods for surface of SiO2 glass. For chemical treatment of surface tequila and alcohol were used but for plasma treatment - Ar+As and Ar+Se plasmas. Surface topography was analyzed using atomic force microscope. Comparison of chemical and plasma treatment methods shows that surface treated with plasma is smoother. Because of their various chemical compositions tequila and alcohol show different results.
Temperature dependence of surface reorganization characteristics of amphiphilic block copolymer in air and in water studied by scanning force microsc…
2015
We have investigated the surface reorganization characteristics of a novel amphiphilic diblock copolymer, poly(acetic acid-2-(2-(4-vinyl-phenoxy)-ethoxy)-ethylester)-block-polystyrene (PAEES-b-PS), in response to varying interfaces from air to water and vice-versa at various temperatures. The surface reorganization characteristics of the block copolymer films was monitored by scanning force microscopy, in order to delineate the kinetically controlled morphological process of surface reorganization of a diblock copolymer, with a particular emphasis on the phase contrast signal which allowed the determination of local composition patterns of PAEES-b-PS at the surface. Upon heating a water-an…