Search results for "fouling"
showing 10 items of 150 documents
Photocatalytic Membrane Reactors: Case Studies and Perspectives
2009
Photocatalysis by polycrystalline semiconductor oxides is being successfully applied to the abatement of organic and inorganic pollutants both in gas and in liquid phase. In order to increase the efficiency of this method, the coupling of this technology with the membrane separation process has been the object of sound investigation. In this combination, the membrane may act in different ways: to confine the photocatalytic powder in the reacting suspension, to selectively separate the photoreaction products, or to be the support of photocatalyst. This article reports recent studies in which different types of membranes (such as distillation, dialysis, nanofiltration, pervaporation and osmos…
Photocatalytic membrane reactors: fundamentals, membrane materials and operational issues
2013
Abstract: This chapter reports the properties of semiconductor materials used in heterogeneous photocatalysis together with a comparison of heterogeneous photocatalytic systems and a brief description of the types of membranes that can be used. Some aspects of membrane operations, such as fouling, separation of a photocatalyst and effectiveness of photodegradation on permeate quality are discussed.
Performance of the first reverse electrodialysis pilot plant for power production from saline waters and concentrated brines
2016
Abstract This work reports experimental data collected for the first time on a full-scale RED pilot plant operated with natural streams in a real environment. The plant – located in the South of Italy – represents the final accomplishment of the REAPower project ( www.reapower.eu ). A RED unit equipped with almost 50 m2 of IEMs (125 cell pairs, 44x44 cm2) was tested, using both artificial and natural feed solutions, these latter corresponding to brackish water (≈0.03 M NaClequivalent) and saturated brine (4–5 M NaClequivalent). A power output up to around 40 W (i.e. 1.6 W/m2 of cell pair) was reached using natural solutions, while an increase of 60% was observed when testing the system with…
Experimental analysis of a continuously operated reverse electrodialysis unit fed with wastewaters
2017
Reverse Electrodialysis (RED) is one of the most promising technologies to convert salinity gradient chemical energy into electricity. RED units are traditionally operated with natural streams as river water and seawater thereby limiting the spread of the technology in sites far from coastal areas. Aim of the present work is that of exploring and expanding feed possibilities for RED systems by employing waste streams. Thus, an experimental study was performed by testing, for the first time, a Reverse Electrodialysis (RED) unit fed with a high salinity wastewater originated in a fish canning factory, and a low salinity wastewater from a sewage treatment plant. Uninterrupted, long duration ex…
Cooperative Catechol-Functionalized Polypept(o)ide Brushes and Ag Nanoparticles for Combination of Protein Resistance and Antimicrobial Activity on M…
2018
Prevention of biofouling and microbial contamination of implanted biomedical devices is essential to maintain their functionality and biocompatibility. For this purpose, polypept(o)ide block copolymers have been developed, in which a protein-resistant polysarcosine (pSar) block is combined with a dopamine-modified poly(glutamic acid) block for surface coating and silver nanoparticles (Ag NPs) formation. In the development of a novel, versatile, and biocompatible antibacterial surface coating, block lengths pSar were varied to derive structure-property relationships. Notably, the catechol moiety performs two important tasks in parallel; primarily it acts as an efficient anchoring group to me…
Influence of total solids concentration on membrane permeability in a submerged hollow-fibre anaerobic membrane bioreactor.
2012
The main aim of this work was to study the influence of the mixed liquor total solids (MLTS) concentration on membrane permeability (K 20) in a submerged anaerobic membrane bioreactor (SAnMBR) pilot plant, which is equipped with industrial hollow-fibre membranes and treats urban wastewater. This pilot plant was operated at 33°C and 70 days of SRT. Two different transmembrane fluxes (13.3 and 10 LMH) were tested with a gas sparging intensity of 0.23 Nm 3 m -2 h -1 (measured as Specific Gas Demand referred to membrane area). A linear dependence of K 20 on MLTS concentration was observed within a range of MLTS concentration from 13 to 32 g L -1 and J 20 of 10 LMH. K 20 was maintained at sustai…
Position paper - progress towards standards in integrated (aerobic) MBR modelling.
2020
Membrane bioreactor (MBR) models are useful tools for both design and management. The system complexity is high due to the involved number of processes which can be clustered in biological and physical ones. Literature studies are present and need to be harmonized in order to gain insights from the different studies and allow system optimization by applying a control. This position paper aims at defining the current state of the art of the main integrated MBR models reported in the literature. On the basis of a modelling review, a standardized terminology is proposed to facilitate the further development and comparison of integrated membrane fouling models for aerobic MBRs. ispartof: WATER …
Thermoeconomic diagnosis of air conditioning systems: experimental assessment of performance for improved reliability
2018
Thermoeconomic diagnosis is an exergy-based fault detection and diagnosis technique which has been recently extended to air conditioning systems. So far, developments of this technique have relied only on simulation data without being evaluated using real data. For the first time, this work aims at assessing the performance of thermoeconomic diagnosis using experimental data obtained from a five-ton packaged rooftop air conditioning unit (RTU) installed at Herrick Laboratories, Purdue University. The RTU was tested in psychrometric chambers under a wide range of operating conditions and fault levels. The following faults were investigated: (i) evaporator fouling, (ii) condenser fouling and …
Ultrasound-Assisted Extraction, Centrifugation and Ultrafiltration: Multistage Process for Polyphenol Recovery from Purple Sweet Potatoes
2016
This work provides an evaluation of an ultrasound-assisted, combined extraction, centrifugation and ultrafiltration process for the optimal recovery of polyphenols. A purple sweet potato (PSP) extract has been obtained using ultrasonic circulating extraction equipment at a power of 840 W, a frequency of 59 kHz and using water as solvent. Extract ultrafiltration, using polyethersulfone (PES), was carried out for the recovery of polyphenol, protein and anthocyanin. Pre-treatment, via the centrifugation of purple sweet potato extract at 2500 rpm over 6 min, led to better polyphenol recovery, with satisfactory protein removal (reused for future purposes), than PSP extract filtration without cen…
Impact of membrane addition for effluent extraction on the performance and sludge characteristics of upflow anaerobic sludge blanket reactors treatin…
2015
Abstract In this study, the impact of membrane incorporation for effluent extraction on the performance of an upflow anaerobic sludge blanket (UASB) reactor treating municipal wastewater was investigated in terms of system performance and sludge characteristics. A laboratory-scale system was operated in two different operational stages: (i) as a sole UASB reactor and (ii) as an anaerobic membrane bioreactor (AnMBR). Membrane incorporation induced an accumulation of fine particles and a decrease in extracellular polymeric substances (EPS), resulting in a decrease in particle size distribution (PSD) and, thus, a drop in sludge settleability. Deterioration of sludge settleability led to an inc…