Search results for "fouling"
showing 10 items of 150 documents
Mass‐Spectrometric Imaging of Electrode Surfaces—a View on Electrochemical Side Reactions
2020
Abstract Electrochemical side reactions, often referred to as “electrode fouling”, are known to be a major challenge in electro‐organic synthesis and the functionality of modern batteries. Often, polymerization of one or more components is observed. When reaching their limit of solubility, those polymers tend to adsorb on the surface of the electrode, resulting in a passivation of the respective electrode area, which may impact electrochemical performance. Here, matrix‐assisted laser‐desorption/ionization mass spectrometry (MALDI‐MS) is presented as valuable imaging technique to visualize polymer deposition on electrode surfaces. Oligomer size distribution and its dependency on the contact …
The efficient mixed matrix antifouling membrane for surfactant stabilized oil-in-water nanoemulsion separation
2019
Abstract Membrane technology has raised considerable interest in sustainable water purification over the past decade. The development of antifouling membranes is always the basic approach to address the omnipresent bottlenecks of the membrane fouling. In this study, AlSi2O6 nanoparticles were synthesized using a coprecipitation technique and their influence was investigated on the permeation and antifouling properties of ultrafiltration (UF) membranes of polysulfone (PSF). A series of membranes were fabricated with various concentrations (such as 0.0, 2.5, 5 and 7.5 wt%) of AlSi2O6 nanoparticles through diffusion induced phase separation method. The prepared composite membranes demonstrate …
Animal fouling as an indicator of water quality in Mediterranean fish farmed areas
2010
In the Mediterranean, most of the fish farm plants are located in very deep water columns (>20-30 m) and are characterised by energetic hydrodynamic regime levels. Thus, the effects of farming load...
Minimizing membrane bioreactor environmental footprint by multiple objective optimization.
2020
This paper presents a modelling study aimed at minimizing the environmental foot print of a membrane bioreactor (MBR) for wastewater treatment. Specifically, an integrated model for MBR was employed in view of the management optimization of an MBR biological nutrient removal (BNR) pilot plant in terms of operational costs and direct greenhouse gases emissions. The influence of the operational parameters (OPs) on performance indicators (PIs) was investigated by adopting the Extended-FAST sensitivity analysis method. Further, a multi-objective analysis was performed by applying the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The results show-up that the sludge …
Sensitivity and uncertainty analysis of an integrated ASM2d MBR model for wastewater treatment
2018
Abstract An integrated membrane bioreactor (MBR) model was previously proposed and tested. The model provides a comprehensive and detailed description of the nitrogen biological removal processes with respect to up-to-date literature. This paper presents a sensitivity and uncertainty analysis aimed at identifying the key factors affecting the variability of the model predictions. The Standardized Regression Coefficients (SRC) method was adopted for the sensitivity analysis. The uncertainty analysis was employed by running Monte Carlo simulations by varying only the value of the key factors affecting the model outputs. The sensitivity analysis combined with the uncertainty analysis applied h…
Simultaneous sludge minimization, biological phosphorous removal and membrane fouling mitigation in a novel plant layout for MBR.
2020
Abstract The integration of one anaerobic reactor in the mainstream (AMSR) of a pre-denitritication-MBR was evaluated with the aim to achieve simultaneous sludge minimization and phosphorous removal. The excess sludge production was reduced by 64% when the AMSR was operated under 8 h of hydraulic retention time (HRT). The highest nutrients removal performances referred to organic carbon (98%), nitrogen (90%) and phosphorous (97%) were obtained under 8 h of HRT. In contrast, prolonged anaerobic-endogenous conditions were found to be detrimental for all nutrients removal performances. Similarly, the lowest membrane fouling tendency (FR = 0.65∙1011 m−1 d−1) was achieved under 8 h of HRT, where…
Biological minimization of excess sludge in a membrane bioreactor: Effect of plant configuration on sludge production, nutrient removal efficiency an…
2018
Abstract Excess sludge minimization was studied in a MBR with pre-denitrification scheme. Sludge minimization, nitrogen removal performance and membrane fouling tendency were investigated in two configurations, characterized by a different position of the sludge retention reactor (SRR). In particular, the SRR was placed: i) in the return activated sludge line (Anaerobic Side-Stream Reactor – ASSR configuration) and ii) in the mainstream between the anoxic and aerobic reactor (Anaerobic Main-Stream Reactor – AMSR configuration). The achieved results demonstrated that the ASSR enabled a higher excess sludge reduction (74% vs 32%), while achieving lower biological nitrogen removal (BNR) (TN = …
Integrated fixed-film activated sludge membrane bioreactors versus membrane bioreactors for nutrient removal: A comprehensive comparison
2018
Abstract This research elucidates the pollutants (nutrients and carbon) removal performance and nitrous oxide (N2O) emissions of two pilot plants. Specifically, a University of Cape Town (UCT) Membrane Bioreactor (MBR) plant and an Integrated Fixed Film Activated Sludge (IFAS)-UCT-MBR plant were investigated. The plants were fed with real wastewater augmented with acetate and glycerol in order to control the influent carbon nitrogen ratio (C/N). The short-term effect of the inlet C/N ratio variation (C/N = 5 mgCOD/mgN and C/N = 10 mgCOD/mgN) on the behaviour of both plants was investigated. The results showed that the IFAS-UCT-MBR configuration provided the best performance in terms of poll…
Biofouling management in anaerobic membrane bioreactors
2020
Abstract This chapter is aimed at providing an insight on the main issues around the membrane fouling in anaerobic membrane bioreactors (AnMBRs). The analysis presented here shows that membrane fouling in AnMBRs is attributed to three major factors: membrane features, operating conditions, and wastewater characteristics. Several ad-hoc strategies have been implemented in literature to mitigate membrane fouling in AnMBRs, such as gas sparging, media addition, chemical cleaning, and membrane rotation/vibration. Among them, gas sparging is considered the most expensive strategy due to the high power requirement of the gas blower (up to 1.345 kWh m− 3). An accurate experimental and modeling ana…
Suspended and attached biomass in an mbr system treating high strength wastewater Loads
2012
abstract