Search results for "fourier transform infrared spectroscopy"

Luminescence of Er/Yb and Tm/Yb doped FAp nanoparticles and ceramics

2015

The nanoparticles of hydroxiapatite and fluorapatite doped with Er/Yb and Tm/Yb were synthesized and characterized by FTIR, XRD, SEM and TEM methods. The results of up-conversion luminescence studies were presented for the samples as prepared, annealed at 500°C and at 900-1000 °C. At annealing above 800°C the ceramic state was formed. It is shown that fluorapatite host is more appropriate than hydroxiapatite host for rare ions luminescence and up-conversion processes. The post preparing annealing of nanarticles significantly enhanced the luminescence intensity. The Tm/Yb doped fluorapatite shows intense up-conversion luminescence in 790-800 nm spectral region and is potentially useful for b…

PEMBUATAN SISTEM VAKUM OTOMATIS GAS H2S BERBAHAN TiO2-Ni/Al2O3 TERKONEKSI ARDUINO UNO PADA LABORATORIUM KIMIA

2021

Research has been carried out on the H2S gas sensor made of TiO2-Ni/Al2O3 which is connected to an automatic vacuum. The results showed that the optimum conditions for the variation of Ni doping metal levels were 20 mg / gram TiO2. The semiconductor material synthesis method used the sol gel method with TTiP precursor which was made at pH 7. Coating of the sol gel solution on the Al2O3 substrate used a dip coater with a decrease speed of 1 cm / minute and was carried out 7 times of immersion. The characterization of synthetic results used UVVis, XRD, FTIR and SEM-EDX. The band gap value resulting from Ni doping is 2.75 eV from 3.2 eV, XRD identification shows that TiO2 is anataseic and dete…

Optical and Vibrational Spectra of CsCl-Enriched GeS2-Ga2S3 Glasses

2016

Optical and FTIR spectroscopy was employed to study the properties of 80GeS2-20Ga2S3-CsCl chalcohalide glasses with CsCl additives in a temperature range of 77–293 K. It is shown that CsCl content results in the shift of fundamental absorption edge in the visible region. Vibrational bands in FTIR spectra of (80GeS2-20Ga2S3)100 − х (СsCl) x (x = 5, 10, and 15) are identified near 2500 cm−1, 3700 cm−1,, around 1580 cm−1, and a feature at 1100 cm−1. Low energy shifts of vibrational frequencies in glasses with a higher amount of CsCl can be caused by possible thermal expansion of the lattice and nanovoid agglomeration formed by CsCl additives in the inner structure of the Ge-Ga-S glass.

Modified arabinoxylan-based films. Part B. Grafting of omega-3 fatty acids by oxygen plasma and electron beam irradiation.

2003

Arabinoxylans (AXs) are byproducts of the cereal milling industry. To obtain high-value products, AXs have been used as a film-forming agent. Hence, AX-based films are poor water vapor barriers. The objectives of this study were to graft omega-3 (omega3) fatty acids onto AX polymeric chains by using two new technologies: cold plasma and electron beam (EB) irradiation. Results show that the surface hydrophobicity of the modified films is higher than that of a waxy coating or a low-density polyethylene (LDPE) film. In addition, FTIR spectroscopy analysis reveals vibration bands attributed to new chemical functions. Finally, a decrease in water vapor permeability (WVP) is obtained for the film…

Copolymer−Cyclodextrin Inclusion Complexes in Water and in the Solid State. A Physico-Chemical Study

2008

The formation of inclusion complexes (ICs) composed of cyclodextrins (CDs) and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) (PEO-PPO-PEO) was studied. To this purpose, native and hydroxypropyl cyclodextrins with different cavity size were chosen. The PEO-PPO-PEO copolymers were selected to study the role of the molecular weight, keeping constant the hydrophilic/hydrophobic ratio, and the hydrophilicity. The volumetric studies at 25 degrees C allowed to determine the equilibrium constant and the volume change for the IC formation in water as well as the IC stoichiometry. Surface tension experiments evidenced that the copolymer and the CD interfacial behavior is controll…

Optimizing the nickel boride layer thickness in a spectroelectrochemical ATR-FTIR thin-film flow cell applied in glycerol oxidation

2021

Abstract The influence of the drop-casted nickel boride catalyst loading on glassy carbon electrodes was investigated in a spectroelectrochemical ATR-FTIR thin-film flow cell applied in alkaline glycerol electrooxidation. The continuously operated radial flow cell consisted of a borehole electrode positioned 50 µm above an internal reflection element enabling operando FTIR spectroscopy. It is identified as a suitable tool for facile and reproducible screening of electrocatalysts under well-defined conditions, additionally providing access to the selectivities in complex reaction networks such as glycerol oxidation. The fast product identification by ATR-IR spectroscopy was validated by the …

Analytical study of canvas painting collection from the Basilica de la Virgen de los Desamparados using SEM/EDX, FT-IR, GC and electrochemical techni…

2001

A new method, based on the combined use of scanning electron microscopy-x-ray microanalysis, Fourier transform infrared spectroscopy, gas chromatography and differential pulse voltammetry, is proposed which permits a parallel investigation of organic and inorganic materials and the characterization of the artistic technique employed in canvas painting. The proposed method has led to analyze succesfully the canvas painting collection exhibited in the Basílica de la Virgen de los Desamparados (Valencia, Spain) which includes art works from 17th to 20th century.

Fourier transform infrared spectroscopy as a tool for investigation of microbial response to the multi-component organic contamination

2014

The influence of Al doping on the photocatalytic activity of nanostructured ZnO: The role of adsorbed water

2018

Abstract Al doped ZnO nanoparticles (labeled as x% A-ZnO, x = 0.0, 0.5, 1.0, and 1.5) were synthesized by a simple sol-gel method, characterized and tested as photocatalysts for the degradation of a model compound under UV-light irradiation. Diffuse reflectance spectroscopy (DRS) and photoelectrochemical analysis have been performed to evidence their optical and electronic behavior. The structural features of the powders were highlighted by means of specific surface area (SSA) analysis, X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and Raman spectroscopy. Al doping results in enhanced photocatalytic activity of the modified powders with respect to pure ZnO. In particular, the h…

Enhanced Solar Light Photocatalytic Activity of Ag Doped TiO2–Ag3PO4 Composites

2020

Composites comprised of Ag3PO4 and bare TiO2 (TiO2@Ag3PO4) or silver doped TiO2 (Ag@TiO2&ndash