Search results for "gravimetry"
showing 10 items of 178 documents
Gel combustion synthesis and magnetic properties of CoFe2O4, ZnFe2O4, and MgFe2O4 using 6-aminohexanoic acid as a new fuel
2020
Abstract For the first time, 6-aminohexanoic acid is used as an alternative fuel in the synthesis of the spinel ferrites with compositions CoFe2O4, ZnFe2O4 and MgFe2O4 using gel combustion synthesis with different oxidizer-to-fuel (O/F) ratios. The gel precursors were studied by differential thermal analysis and thermogravimetry (DTA/TG), which showed that the ignition temperature depends on the gel precursor, being around 230 °C, 130 °C and 275 °C for CoFe2O4, ZnFe2O4, and MgFe2O4, respectively. These results showed than the 6-aminohexanoic acid has an ignition temperature lower than the urea and the citric acid when were used in the synthesis of the spinel ferrites by gel combustion. More…
Thermal oxidation of the intermetallic phases Al 8 Mo 3 and AlMo 3
2017
Abstract The thermal oxidation reactions of the intermetallic phases Al8Mo3 and AlMo3 were investigated and analyzed by ex-situ powder-x-ray diffraction (XRD), difference thermal analysis (DTA), thermogravimetry (TGA), and infrared spectroscopy (IR). The initial oxidation reactions in air were found to yield Al2O3 and AlMo3 in the case of Al8Mo3 (Tonset =725 °C), and MoO3 as well as Al8−xMo3 (Tonset =435 °C) for the pure intermetallic phase AlMo3, respectively. Thus, both intermetallic phases are coexisting in an equilibrium within a temperature range of 300 °C under oxidizing conditions. The formation of β-Al2(MoO4)3 followed the second oxidizing process of the respective minority componen…
The BepiColombo MORE gravimetry and rotation experiments with the ORBIT14 software
2016
The BepiColombo mission to Mercury is an ESA/JAXA cornerstone mission, consisting of two spacecraft in orbit around Mercury addressing several scientific issues. One spacecraft is the Mercury Planetary Orbiter, with full instrumentation to perform radio science experiments. Very precise radio tracking from Earth, on-board accelerometer and optical measurements will provide large data sets. From these it will be possible to study the global gravity field of Mercury and its tidal variations, its rotation state and the orbit of its centre of mass. With the gravity field and rotation state, it is possible to constrain the internal structure of the planet. With the orbit of Mercury, it is possib…
Spray-Drying Performance and Thermal Stability of L-Ascorbic Acid Microencapsulated with Sodium Alginate and Gum Arabic
2019
[EN] The potential of sodium alginate (ALG) and gum arabic (GA) as wall polymers for Lascorbic acid (AA) encapsulation as a tool for their preservation against the thermo-oxidative degradation was investigated. The influence of such polymers used as wall material on the AAcontent, size, encapsulation efficiency, encapsulation yield and thermo-oxidative stability were evaluated. The AA-microparticles were obtained using the spray-drying technique. An experimental Taguchi design was employed to assess the influence of the variables in the encapsulation process. The microparticles morphology and size distribution were characterized by scanning electron microscopy and laser diffraction. The the…
Adsorption equilibria of water vapor on cork.
2010
International audience; We report here for the first time a complete thermodynamic study of water vapor adsorption on crude cork powder and plate. Adsorption−desorption isotherms were accurately measured by thermogravimetry at 283, 298, and 313 K in a large range of relative pressure. Adsorption enthalpies were determined by calorimetry as a function of loading. Adsorption−desorption isotherms exhibit a hysteresis due to the swelling of the material. The influence of the presence of lenticels on the adsorption properties of cork is found to be negligible. A detailed analysis and interpretation of adsorption data allow proposal of an adsorption mechanism in two steps. (i) First, water adsorb…
Influence de la symétrie et de la taille de la molécule adsorbée sur le processus d'adsorption des composés éthyléniques sur une zéolithe de topologi…
2005
This manuscript lies within the scope of the understanding of the stepped isotherm observed during adsorption, on MFI zeolites, of some organic compounds which have a similar size to that of the pore opening of zeolite. During this work, the process of adsorption of ethylene and tetramethylethylene is initially studied by gravimetry and then by in situ infrared spectroscopy. This last technique enables to follow simultaneously the modifications of the adsorbent and the adsorbate. The analysis of these data lets suppose that the step in adsorption isotherm can be explained by taking account simultaneously of the symmetry and the size of the admolecule. In addition to the infrared bands chara…
"Reactivity of Cu3Si of different genesis towards copper(I) chloride"
2000
Abstract A comparative study of the reactivity between copper(I) chloride and three types of Cu 3 Si obtained in a molten medium (Cu 3 Si-Ref) and from mechanical activation following an annealing process (Cu 3 Si-M2AP) or a self-propagating high-temperature synthesis (Cu 3 Si-MASHS) was performed by thermogravimetry under vacuum using non-isothermal and isothermal methods of kinetic measurement. It was established that for the three Cu 3 Si/CuCl systems, the acceleration and decay stages in the temperature range 145–215°C are very closely approximated by an equation of the Prout–Tompkins type where an autocatalytic process was proposed. The lower apparent activation energy obtained for the…
Selective Antimicrobial Effects of Curcumin@Halloysite Nanoformulation: A Caenorhabditis elegans Study
2019
Alterations in the normal gastrointestinal microbial community caused by unhealthy diet, environmental factors, and antibiotic overuse may severely affect human health and well-being. Novel antimicrobial drug formulations targeting pathogenic microflora while not affecting or even supporting symbiotic microflora are urgently needed. Here we report fabrication of a novel antimicrobial nanocontainer based on halloysite nanotubes loaded with curcumin and protected with a dextrin outer layer (HNTs+Curc/DX) and its effective use to suppress the overgrowth of pathogenic bacteria in Caenorhabditis elegans nematodes. Nanocontainers have been obtained using vacuum-facilitated loading of hydrophobic …
An electromechanical perspective on the metal/solution interfacial region during the metallic zinc electrodeposition
2009
The difficulty of studying the metal/solution interfacial region makes the use of non-conventional measurement techniques indispensable. In this way, a careful in situ study by means of acoustic impedance techniques coupled with nano-electrogravimetric techniques allowed this interface to be monitored during the metallic zinc electrodeposition process. This paper proves the formation of a viscoelastic layer consisting of ultra-hydrated Zn(II)/Zn(I) salts as a key step in the metallic zinc electrodeposition mechanism in sulfate aqueous solutions. Surprisingly, this layer is located in the metal/solution interfacial region and not on the reaction substrate. The chloride ions effect on the met…
Kinetic and Mechanistic Aspects of a Poly(o-Toluidine)-Modified Gold Electrode. 2. Alternating Current Electrogravimetry Study in H2SO4 Solutions
2012
International audience; Electrodeposited poly(o-toluidine) (POT) on gold electrodes was investigated in 0.5 M H2SO4 aqueous solutions using alternating current electrogravimetry (simultaneous electrochemical impedance and mass transfer functions). The kinetic aspects of the three different redox transitions proposed for this polymer (leucoemeraldine-polaron transition, polaron-bipolaron transition, and bipolaron-pernigraniline transition) and the species involved, cation (hydrated proton), anion (bisulfate ion), and free solvent (water), are studied by means of the mass impedance technique. An ionic transfer model is proposed with coherent results where anion transfer is the fastest process…