Search results for "hardness"
showing 10 items of 160 documents
Reactive Sintering of molybdenum disilicide by Spark Plasma Sintering from mechanically activated powder mixtures: Processing parameters and properti…
2008
Abstract Dense molybdenum disilicide with a nano-organized microstructure was synthesized by mechanical activation, by producing nanostructured agglomerates of a 1:2 mixture of Mo and Si, followed by the synthesis/consolidation in one step using SPS technology. In order to synthesize a dense molybdenum disilicide with a perfectly controlled microstructure, an investigation of the influence of Spark Plasma Sintering processing parameters (temperature, heating rate, mechanical pressure and holding time) on the chemical composition and the microstructure characteristics has been performed. The present work shows also that the so-obtained materials present better oxidation resistance in compari…
Aqueous Corrosion of the GeSe4 Chalcogenide Glass: Surface Properties and Corrosion Mechanism
2009
International audience; The aqueous corrosion behavior of the GeSe4 glass composition has been studied over time under various conditions (temperature and pH). The evolution of the surface topography by atomic force microscopy and properties such as surface hardness and reduced modulus, as well as the optical transmission in the 1-16 μm window, have been measured as a function of time spent in the corrosive solution. It was found that even if the glass reacts at room temperature, its optical transparency was barely affected. Nevertheless, the durability of GeSe4 was found to be drastically affected by an increase of both temperature and pH. Furthermore, pure selenium nanoparticles were form…
Forage silica and water content control dental surface texture in guinea pigs and provide implications for dietary reconstruction.
2019
Significance Ingesta leave characteristic wear features on the tooth surface, which enable us to reconstruct the diet of extant and fossil vertebrates. However, whether dental wear is caused by internal (phytoliths) or external (mineral dust) silicate abrasives is controversially debated in paleoanthropology and biology. To assess this, we fed guinea pigs plant forages of increasing silica content (lucerne < grass < bamboo) without any external abrasives, both in fresh and dried state. Abrasiveness and enamel surface wear increased with higher forage phytolith content. Additionally, water loss altered plant material properties. Dental wear of fresh grass feeding was similar to lucerne brows…
Surface and mechanical characterization of stationary shoulder friction stir welded lap joints: experimental and numerical approach
2020
Friction Stir Welding (FSW) is one of the most used solid-state welding processes in the aeronautical, aerospace, ground transportation and naval fields. Stationary Shoulder Friction Stir Welding (SSFSW) is a recently introduced variant of the process allowing lower heat input into the joints, with beneficial effects in terms of joint mechanical properties, microstructure and top surface finish. In the paper, lap joints produced by SSFSW and made out of AA6082-T6 aluminum alloy sheets have been analyzed with the aim to investigate the effect of the stationary shoulder on the lap joints surface, metallurgical, and mechanical properties. The lap joints produced by SSFSW have been compared to …
Enhancement of mechanical properties of FSWed AA7075 lap joints through in-situ fabrication of MMC
2017
Abstract Friction Stir Processing (FSP) has been demonstrated feasible to create local Metal Matrix Composites (MMCs) in light alloys matrix. In this research, local MMCs were produced contextually to the weld using Friction Stir Welding (FSW). SiC particles were added to AA7075 lap joints by creating a proper groove on the top surface of the bottom sheet. Different welds were produced with increasing number of tool passes. The effect of the multiple passes was investigated through shear tests, macro and micro observations, average grain size and microhardness measurements. The welded joints were compared to a reference weld produced with no reinforcements. It was found that poor mixing bet…
Effect of active heating and cooling on microstructure and mechanical properties of friction stir–welded dissimilar aluminium alloy and titanium butt…
2019
A butt joint configuration of AA6061–pure Ti was welded using friction stir welding (FSW) with an assisted cooling and heating conditions, aiming to attain a flawless joint. Cooling-assisted friction stir welding (CFSW) was carried out with a different cooling medium such as CO2, compressed air and water at controlled flow rate. However, heating-assisted friction stir welding (HFSW) was performed with heating source of GTAW torch just before FSW tool at different current density. Prepared specimens were subjected to optical microscopy (OM), scanning electron microscopy (SEM) and electrodischarge spectroscopy (EDS) for microstructural characterizations. The tensile strength and microhardness…
Repeated exposure of acidic beverages on esthetic restorative materials: An in-vitro surface microhardness study.
2015
Background A manifold increase in the consumption of aerated beverages has witnessed a twin increase in tooth wear and raised demand for esthetic restorative materials. This study aimed to evaluate the surface microhardness changes of esthetic restorative materials following treatment with aerated beverages in an in-vitro situation. Material and Methods The initial surface microhardness of the restorative materials GC Fuji II LC, GC Fuji IX, Nano Glass ionomer, Resin and Nano composite was recorded. These materials were studied under 3 groups that included those exposed to the acidic beverages daily, weekly once in a month and those that had no exposures at all. The final surface microhardn…
Effect of in-office bleaching gels with calcium or fluoride on color, roughness, and enamel microhardness
2019
Background Commercial bleaching gels with remineralizing agents were developed to reduce the adverse effects of dental bleaching. The present study evaluated the effects on teeth of in-office bleaching gels containing 35-40% hydrogen peroxide (HP) with Calcium (Ca) or Fluoride (F). Material and methods Bovine enamel/dentin blocks (4x4x2.5 mm) were randomly divided into the following groups (n=12): no treatment (control); 35% HP (Whiteness HP, FGM); 35% HP with Ca (Whiteness HP Blue, FGM); 40% HP with F (Opalescence Boost, Ultradent). The specimens were analyzed for color (ΔL*, Δa*, Δb*, and ΔE), roughness (Ra), and Knoop microhardness (KHN). The color and KHN data were submitted to ANOVA an…
Correlation between micro-hardness and mineral content in healthy human enamel
2016
Background Enamel is the hardest and the stiffest tissue in the human body. The enamel undergoes multidirectional stresses, withstands multimillion chewing cycles, all while protecting the internal dentin and pulp from damage due to mechanical overload and exposure to the harsh chemical environment of the mouth. Raman spectroscopy allows to study enamel mineral content in a non-destructive and site-specific way. While Raman spectroscopy has been applied in other studies to assess tooth mineralization, there are no studies that examine the relationship between micro-hardness and mineral content of the untreated enamel. An understanding of this relationship is extremely important in a clinica…
A time based objective evaluation of the erosive effects of various beverages on enamel and cementum of deciduous and permanent teeth
2019
Background Erosion of the teeth is a chronic irreversible process leading to loss of surface enamel and even the dentin, in turn causing sensitivity and pain. Increased consumption of carbonated beverages remains a major cause for dental erosion. However, many of the so called safe beverages that are consumed may also have sufficiently low pH to cause dental erosion. One of the parameters to measure the dental erosion is estimation of hardness and surface roughness. Thus, this study aims to evaluate the difference in hardness and surface roughness of enamel and cementum using three beverages namely (carbonated drink, lime soda, lime juice) in deciduous and permanent teeth. Material and Meth…