Search results for "harmonic"
showing 10 items of 984 documents
Modular approach to obtaining organic glasses from low-molecular weight dyes using 1,1,1-triphenylpentane auxiliary groups: Nonlinear optical propert…
2013
Abstract A new modular synthetic approach to obtain organic glasses from low-molecular weight azobenzenes and stilbenes has been accomplished using 1,1,1-triphenylpentane crystallization preventing auxiliary groups. Six new structures show excellent solubility in non-polar solvents and thin films with good optical qualities have been obtained using a spin-coating technique. The glass transition temperatures of the new amorphous materials were in the range of 73–108 °C. The nonlinear optical activity in thin amorphous films was measured after a corona poling procedure.
Ab initio studies on the lattice thermal conductivity of silicon clathrate frameworks II and VIII
2016
The lattice thermal conductivities of silicon clathrate frameworks II and VIII are investigated by using ab initio lattice dynamics and iterative solution of the linearized Boltzmann transport equation(BTE) for phonons. Within the temperature range 100-350 K, the clathrate structures II and VIII were found to have lower lattice thermal conductivity values than silicon diamond structure (d-Si) by factors of 1/2 and 1/5, respectively. The main reason for the lower lattice thermal conductivity of the clathrate structure II in comparison to d-Si was found to be the harmonic phonon spectra, while in the case of the clathrate structure VIII, the difference is mainly due to the harmonic phonon spe…
Analysis, characterization and minimization of IPMSMs cogging torque with different rotor structures
2015
This paper presents the analysis, characterization and comparison of the cogging torque components generated by five different IPMSM rotor structures. More in detail, an IPMSM model (named IPMSM1), which is derived from a commercial geometry, is analyzed by using a Finite Element Method (FEM) approach. Then, four other IPMSM models, which are obtained by modifying the IPMSM1 rotor structure and by maintaining the same stator configuration, are proposed and analyzed. From the obtained simulation results, the cogging torque components for each structure are determined and compared. From this comparison, a significant cogging torque decrease is occurring for the modified geometries, without af…
Influence on PD Parameters due to Voltage Conducted Disturbances
2004
In the standard specification of ac dielectric-characteristic measurements of insulating materials, test voltage is prescribed as "approximately sinusoidal" when the highest acceptable deviation of the HV waveform, from the correct sinusoidal shape, is limited to a /spl plusmn/5% tolerance range of the crest factor value. In the field of partial discharge (PD) measurements and their statistical data processing, on which forecasts of long term behavior of components and their reliability are currently carried out, the results of elaborations depend on the voltage wave shape. In this paper, the errors in PD measurements, evaluated at industrial frequencies, due to applied voltages distorted b…
Optimized blue light generation in optically contacted walk-off compensated RbTiOAsO4 and KTiOP1−yAsyO4
1999
Abstract We study type II 1.32 μm second harmonic generation (SHG) in a RbTiOAsO 4 optically contacted walk-off compensated device. The reduction of the effective walk-off angle by a factor of 3.7 with respect to KTiOPO 4 for the same interaction leads to an enhancement by a factor of 10 of the conversion efficiency. A model is proposed for both type I and type II SHG in such a structure. The angular tuning curve is a multi-peaked one, as predicted by the model. The enhancement of the SHG conversion efficiency allows us to optimize the generation of blue laser light at 440 nm: a specially designed KTiOP 0.98 As 0.02 O 4 solid solution crystal achieves angular non-critical phase matching at …
Second harmonic generation in coupled LiNbO3 waveguides by reverse-proton exchange
2003
We demonstrate second harmonic generation of a near-infrared pump in a nonlinearly coupled system formed by longitudinally uniform proton- and reverse-proton-exchanged LiNbO/sub 3/ planar waveguides. Phase- and mode-matched transverse electric (TE/sub 0/) frequency doubling into transverse magnetic higher order guided modes is achieved through temperature control, in agreement with the model.
Investigation of the crack tip stress field in a stainless steel SENT specimen by means of Thermoelastic Stress Analysis
2019
Abstract In this work a Thermoelastic Stress Analysis (TSA) setup is implemented to investigates the Thermoelastic and Second Harmonic signals on a fatigue loaded Single Edge Notched Tension (SENT) specimen made of stainless steel AISI 304L. Three load ratios are in particular applied, R=-1, 0, 0.1. The thermoelastic signal is used to evaluate the Stress Intensity Factor via two approaches, the Stanley-Chan linear interpolation method and the over-deterministic least-square fitting (LSF) method using the Williams’ series expansion. Regarding least-square fitting, an iterative procedure is proposed to identify the optimal crack tip position in the thermoelastic maps. The SIF and T-Stress are…
High-temperature emission spectroscopy of methane
2008
International audience; A high-enthalpy source (HES) has been developed in Rennes either to heat gases up to 2000K in local thermodynamic equilibrium (LTE) or to generate hypersonic expansions. The HES prototype has been associated with a high-resolution Bruker IFS 120 HR Fourier transform spectrometer to record emission spectra of hot gases, in LTE conditions. A series of emission spectra of methane has been obtained at 1005, 1365, 1485, 1625 and 1820K in the pentad spectral region located around 3000 cm1, at Doppler-limited resolution (0.02 cm1). Spectra have been corrected for the transmission function that strongly affects the infrared radiation emitted by the hot gas. Line-integrated a…
Development of two-color resonance ionization scheme for Th using an automated wide-range tunable Ti:sapphire laser system
2018
Two-color resonance ionization schemes of Th were investigated by an automated wide-range tunable, grating-assisted Ti:Sa laser system with intracavity SHG option. A two-color ionization scheme via autoionizing state (1st step: 372.049 nm and 2nd step: 401.031 nm) was developed and its relative efficiency was lower by factor of three compared to a known three color scheme. peerReviewed
Passively mode-locked erbium-doped double-clad fiber laser operating at the 322nd harmonic
2009
International audience; We report passive mode locking of a soliton erbium-doped double-clad fiber laser operating at the 322nd harmonic of the fundamental cavity frequency. Repetition rates up to 3 GHz have been obtained with pulses of 1 ps duration and 18 pJ of energy. The supermode suppression at the 322nd harmonic is better than 25 dB. In addition, the transition dynamics from a bunched state of pulses to stable harmonic mode locking is presented, revealing a very long time scale.