Search results for "hell"

Growth, structural and optical properties of GaN/AlN and GaN/GaInN nanowire heterostructures

2012

Abstract After discussing the GaN NW nucleation issue, we will present the structural properties of axial and radial (i.e. core/shell) GaN/AlN NW heterostructures and adress the issue of critical thickness during the growth of such heterostructures. Next, we will present the growth of InGaN NWs on a GaN NW base. It will be shown that the morphology and structural properties of the InGaN NW sections depend on the In content: for high In content a flat top is observed and plastic relaxation is occuring, with mismatch dislocations formed at the InGaN/GaN interface. By contrast, for In content below 25% InGaN NWs exhibit a pencil-like shape assigned to a purely elastic strain relaxation process…

Ellipsoidal core-shell cylindrical microphases in PS-b -PB-b -PCL triblock copolymers with a crystallizable matrix

1997

Polystyrene-block-polybutadiene-block-poly(e-caprolactone) SBC triblock copolymers with a PCL matrix exhibit microphase separation into three different phases within the spherulitic superstructures. Mixing of the PS-block can occur upon melting of the PCL-block if the molecular weight is low enough. Even though the crystallization takes place well below the PS-glass transition, a deformation of the amorphous microphases into ellipsoidal core-shell cylindrical microdomains is observed by TEM. These copolymers have mechanical properties which are dominated by the PCL (Poly(e-caprolactone)) matrix with an influence of the amorphous blocks.

A convenient approach to amphiphilic hyperbranched polymers with thioether shell for the preparation and stabilization of coinage metal (Cu, Ag, Au) …

2014

Defect Calculations for Yttrium Aluminum Perovskite and Garnet Crystals

2000

Native and impurity point defects in both Yttrium Aluminum Perovskite and Garnet crystals are studied in the framework of the pair-potential and the shell model approximations. The calculated formation energies for native defects suggest that the antisite disorder is preferred over the Frenkel and Schottky-like disorder in both YAP and YAG. In non-stoichiometric compounds, the calculated reaction energies indicate that excess of Y2O3 or Al2O3 is, most likely, to be accommodated by the formation of antisites rather than vacancies or interstitials in the lattice. Enthalpies of the reactions for impurity (Ca2+, Mg2+, Sr2+, Ba2+, Cr3+, Fe3+, Nd3+, Si4+) incorporation into both YAP and YAG latti…

Shape restoration effect in Ag-SiO2 core-shell nanowires.

2014

The combination of two different materials in a single composite core–shell heterostructure can lead to improved or even completely novel properties. In this work we demonstrate the enhancement of the mechanical properties of silver (Ag) nanowires (NW) achieved by coating them with a silica (SiO2) shell. In situ scanning electron microscope (SEM) nanomechanical tests of Ag–SiO2 core–shell nanowires reveal an improved fracture resistance and an electron-beam induced shape restoration effect. In addition, control experiments are conducted separately on uncoated Ag NWs and on empty SiO2 shells in order to gain deeper insight into the peculiar properties of Ag–SiO2. Test conditions are simulate…

Thin-shell plastic lenses for space and laboratory applications

2004

We have identified an inexpensive, readily available, mechanically stable, extremely smooth, elastic, and mechanically uniform plastic suitable for thin film X-ray optics. Polyethylene terephthalate (PET) is easily deformed without losing its elastic properties or surface smoothness. Most important, PET can be coated with mono- or multilayers that reflect X-rays at grazing incidence. We have used these properties to produce X-ray optics made either as a concentric nest of cylinders or as a spiral. We have produced accurately formed shells in precisely machined vacuum mandresl or used a pin and wheel structure to form a continuously wound spiral. The wide range of medical, industrial and sci…

Luminescent silicon nanocrystals produced by near-infrared nanosecond pulsed laser ablation in water

2014

Abstract We report the investigation of luminescent nanoparticles produced by ns pulsed Nd:YAG laser ablation of silicon in water. Combined characterization by AFM and IR techniques proves that these nanoparticles have a mean size of ∼3 nm and a core–shell structure consisting of a Si-nanocrystal surrounded by an oxide layer. Time resolved luminescence spectra evidence visible and UV emissions; a band around 1.9 eV originates from Si-nanocrystals, while two bands centered at 2.7 eV and 4.4 eV are associated with oxygen deficient centers in the SiO 2 shell.

Friction and wear of lubricated M3 Class 2 sintered high speed steel with and without TiC and MnS additives

2005

Abstract M3/2 sintered high speed steel and composite materials processed by initial admixing of 5 wt.% TiC (to decrease wear) and 5 wt.% MnS (to minimise friction) powders, singly and in combination, were assessed in pin-on-disc tribometers specially constructed to simulate use in the automotive valve train. Pins were of the sintered materials and the mating tribological material discs of T1 high speed steel. For comparison with existing conventional materials, identical tests were performed with discs and pins of two types of spheroidal cast iron. Testing at ∼110 °C, employing a few drops of fresh Shell Helix Standard SAE: 15W-40, API: SJ/CF oil, in daily segments of 5000 m of sliding dis…

Molluscan biomineralization: The proteinaceous shell constituents of Pinna nobilis L.

2005

Abstract The shell of molluscs is a remarkable example of a natural composite biomaterial, synthesized at ambient temperature. Consequently, many consider it as a model for trying to develop at little cost new biomimetic materials of superior mechanical properties. The peculiar resistance of shells to fracture lies in an organic matrix, which is closely associated with the mineral phase. This matrix regulates the crystal growth, by allowing nucleation of the crystals only where appropriate, by favoring crystal elongation in privileged directions, and by inhibiting their growth. This matrix is a mixture of glycoproteins and polysaccharides, the primary structure and function of which are poo…

Investigations on Load Capacity and stability of deformation of rubber cylindrical shells under internal pressure

1994

The paper presents a wide analysis of conditions under which a loss of deformation stability can be observed as well as local bulges form in axially-symmetric (rotational) shells of any length. Analytical relations of the theory of shells were used for the analysis. If the maximum pressure in the shell was exceeded, the deformation process was investigated too. In such a case, strains begin to develop more intensely in the central part of a long cylindrical shell and, owing to that, one or more superimposed bulges (blisters) form. Symmetry of the shell deformation in relation to the centre of its length can be disturbed. A set of algebraic equations was derived for determination of critical…