Search results for "ingegneria"
showing 10 items of 1227 documents
Assessment and characterization of the bacterial community structure in advanced activated sludge systems
2019
Abstract The present study is aimed to assess and characterize the structure of bacterial community in advanced activated sludge systems. In particular, activated sludge samples were collected from an Integrated Fixed-film Activated Sludge – Membrane Bioreactor pilot plant under a University of Cape Town configuration with in-series anaerobic (Noair)/anoxic (Anox)/aerobic (Oxy) reactors – and further analyzed. The achieved results – based on Next Generation Sequencing (NGS) of 16S rDNA amplicons – revealed that the bacterial biofilm (bf) communities on plastic carriers of Oxy and Anox reactors had a greater diversity compared to suspended (sp) bacterial flocs of Oxy, Anox and Noair. Indeed,…
Effect of complexing agents on phosphorus release from chemical-enhanced phosphorus removal sludge during anaerobic fermentation
2020
Phosphorus (P) release from sludge containing phosphate precipitates (FePs or AlPs) as well as the anaerobic performance with the addition of complexing agents (citric, tartaric and EDTA) during ambient anaerobic fermentation process were investigated. Results showed that citrate addition was the most effective method to enhance P release from inorganic phosphate by chelation and promote volatile fatty acids (VFAs) production simultaneously during anaerobic fermentation. Equimolar citrate addition with chemical precipitates was the optimal dosage. Microbial analysis revealed that EDTA has the strongest inhibitory effect on microbial activity and community structure, while citrate was more e…
Bioplastic recovery from wastewater: A new protocol for polyhydroxyalkanoates (PHA) extraction from mixed microbial cultures
2019
Abstract A new protocol for polyhydroxyalkanoates (PHA) extraction from mixed microbial cultures (MMCs) is proposed. PHA-accumulating capacity of the MMC was selected in a sequencing batch reactor (SBR) fed with a synthetic effluent emulating a fermented oil mill wastewater (OMW). The highest recovery yield and purity (74 ± 8% and 100 ± 5%, respectively) was obtained when using NH4-Laurate for which operating conditions of the extraction process such as temperature, concentration and contact time were optimized. Best conditions for PHA extraction from MMC turned to be: i) a pre-treatment with NaClO at 85 °C with 1 h of contact time, followed by ii) a treatment with lauric acid in a ratio ac…
Assessment of landfill leachate biodegradability and treatability by means of allochthonous and autochthonous biomasses
2020
Abstract The biodegradability and treatability of a young (3 years old) municipal landfill leachate was evaluated by means of chemical oxygen demand (COD) fractionation tests, based on respirometric techniques. The tests were performed using two different biomasses: one cultivated from the raw leachate (autochthonous biomass) and the other collected from a conventional municipal wastewater treatment plant after its acclimation to leachate (allochthonous biomass). The long term performances of the two biomasses were also studied. The results demonstrated that the amount of biodegradable COD in the leachate was strictly dependent on the biomass that was used to perform the fractionation tests…
Integrated Fixed Film Activated Sludge (IFAS) membrane BioReactor: The influence of the operational parameters
2020
Abstract The present paper investigated an Integrated Fixed Film Activated Sludge (IFAS) Membrane BioReactor (MBR) system monitored for 340 days. In particular, the short-term effects of some operational parameters variation was evaluated. Results showed a decrease of the removal rates under low C/N values. Respirometry results highlighted that activated sludge was more active in the organic carbon removal. Conversely, biofilm has a key role during nitrification. The major fouling mechanism was represented by the cake deposition (irreversible).
Carvacrol activated biopolymeric foam: An effective packaging system to control the development of spoilage and pathogenic bacteria on sliced pumpkin…
2021
Abstract A commercial biodegradable starch-based polymer (Mater-Bi) was activated with carvacrol to develop a biodegradable and compostable polymer to be used in food packaging. Based on previous tests, carvacrol was added at 20 % weight of foam. MB foams, with and without carvacrol, were tested for their morphological characteristics, mechanical tests and kinetics of carvacrol release under refrigerated storage conditions. Carvacrol slightly increased the porosity of the foams, induced a reduction of the compressive elastic modulus (Ecom) of foamed MB from 6 to ∼ 3.4 MPa and a decrease of the tensile elastic modulus from ∼70 MPa to ∼16.5 MPa. Carvacrol release from the foam at 4 °C was alm…
Assessing Methane Emission and Economic Viability of Energy Exploitation in a Typical Sicilian Municipal Solid Waste Landfill
2018
Sanitary landfills for municipal solid waste (MSW) represent one of the major anthropogenic source of GHGs emissions and are directly responsible of the climate changes we are facing nowadays. Indeed, the biodegradable organic matter of MSW undergoes anaerobic digestion producing the landfill gas (LFG), whose main components are CH4 and CO2. Therefore, biomethane energy exploitation in MSW landfills will reduce GHGs emission positively affecting the global warming. The aim of the present study was to assess the methane production in a Sicilian landfill by comparing the results from field measurements of methane emission and the estimates achieved by applying different mathematical models. A…
Integrated membrane bioreactors modelling: A review on new comprehensive modelling framework
2021
International audience; Integrated Membrane Bioreactor (MBR) models, combination of biological and physical models, have been representing powerful tools for the accomplishment of high environmental sustainability. This paper, produced by the International Water Association (IWA) Task Group on Membrane Modelling and Control, reviews the state-of-the-art, identifying gaps for future researches, and proposes a new integrated MBR modelling framework. In particular, the framework aims to guide researchers and managers in pursuing good performances of MBRs in terms of effluent quality, operating costs (such as membrane fouling, energy consumption due to aeration) and mitigation of greenhouse gas…
Intermittent Aeration in a Hybrid Moving Bed Biofilm Reactor for Carbon and Nutrient Biological Removal
2020
The paper presents an experimental study on a lab scale hybrid moving bed biofilm reactor with intermittent aeration. Specifically, a comparison between two different operating conditions was analyzed: continuous and intermittent aeration. Both continuous and intermittent aeration were monitored and compared in order to get the best operational conditions. The intermittent aeration campaign was sub-divided in three phases with different duration of alternation of aerobic and anoxic times and organic and nitrogen loading rates. The efficiency of N-removal improved by 70% during the intermittent aeration. The best condition was observed with 40 min of aeration and 20 min of no-aeration, an or…
A validity and reliability study of Conditional Entropy Measures of Pulse Rate Variability
2019
In this work, we present the feasibility to use a simpler methodological approach for the assessment of the short-term complexity of Heart Rate Variability (HRV). Specifically, we propose to exploit Pulse Rate Variability (PRV) recorded through photoplethysmography in place of HRV measured from the ECG, and to compute complexity via a linear Gaussian approximation in place of the standard model-free methods (e.g., nearest neighbor entropy estimates) usually applied to HRV. Linear PRV-based and model-free HRV-based complexity measures were compared via statistical tests, correlation analysis and Bland-Altman plots, demonstrating an overall good agreement. These results support the applicabil…