Search results for "ionic liquid"
showing 10 items of 432 documents
Isobaric vapor-liquid equilibria for extractive distillation of 1-propanol + water mixture using thiocyanate-based ionic liquids
2017
Abstract This paper presents vapor-liquid equilibrium (VLE) data at 101.3 kPa for the ternary systems 1-propanol + water + 1-ethyl-3-methylimidazolium thiocyanate [emim][SCN] and 1-propanol + water + 1-butyl-3-methylimidazolium thiocyanate [bmim][SCN] and their constituents binary systems. The experimental data obtained were correlated using the NRTL, eNRTL and UNIQUAC models. It was found that the addition of these ionic liquids enhance the relative volatility of 1-propanol to water, and the separation ability follows the order of [emim][SCN] > [bmim][SCN]. The results obtained were compared with the VLE data of the system containing this azeotropic mixtures with different imidazolium-base…
Multilayered supported ionic liquids as catalysts for chemical fixation of carbon dioxide
2011
Multilayered, covalently supported ionic liquid phase (mlc-SILP) materials were synthesized by using a new approach based on the grafting of bis-vinylimidazolium salts on different types of silica or polymeric supports. The obtained materials were characterized and tested as catalysts in the reaction of supercritical carbon dioxide with various epoxides to produce cyclic carbonates. The material prepared by supporting a bromide bis-imidazolium salt on the ordered mesoporous silica SBA-15 was identified as the most active catalyst for the synthesis of cyclic carbonates and displayed improved productivity compared with known supported ionic liquid catalysts. The catalyst retained its high act…
Experimental Determination and Correlation of Liquid–Liquid Equilibria Data for a System of Water + Ethanol + 1-Butyl-3-methylimidazolium Hexafluorop…
2017
Over the past few years, interest has increased regarding the application of ionic liquids (ILs) as extraction solvents for separating azeotropic mixtures. Following this trend, this work presents the experimental data of liquid–liquid equilibria (LLE) of the system envolving water, ethanol, and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) at different temperatures. The LLE data of the system was measured between 283.2 and 323.2 K to determine the temperature influence on the system. In the literature, reports of systems involving ILs that present type II behavior are scarce compared with those that present type I behavior; the system presented here also displays two immisc…
Synthesis and high-throughput testing of multilayered supported ionic liquid catalysts for the conversion of CO2 and epoxides into cyclic carbonates
2014
Multilayered covalently supported ionic liquid phase (mlc-SILP) materials were synthesised by grafting different bis-vinylimidazolium salts on thiol-functionalised silica. These materials, which contain a cross-linked oligomeric network of imidazolium units, were characterised and tested as catalysts for the reaction of carbon dioxide with various epoxides to produce cyclic carbonates. The materials prepared by supporting a bis-imidazolium iodide salt with xylene or octane as a linker between the imidazolium units were identified as the most active catalysts and displayed high turnover numbers and improved productivity compared to known supported ionic liquid catalysts. The most promising m…
Gelled Electrolyte Containing Phosphonium Ionic Liquids for Lithium-Ion Batteries
2018
In this work, new gelled electrolytes were prepared based on a mixture containing phosphonium ionic liquid (IL) composed of trihexyl(tetradecyl)phosphonium cation combined with bis(trifluoromethane)sulfonimide [TFSI] counter anions and lithium salt, confined in a host network made from an epoxy prepolymer and amine hardener. We have demonstrated that the addition of electrolyte plays a key role on the kinetics of polymerization but also on the final properties of epoxy networks, especially thermal, thermo-mechanical, transport, and electrochemical properties. Thus, polymer electrolytes with excellent thermal stability (>
Thermodiffusion anisotropy under a magnetic field in ionic liquid-based ferrofluids
2021
International audience; Ferrofluids based on maghemite nanoparticles (NPs), typically 10 nm in diameter, are dispersed in an ionic liquid (1-ethyl 3-methylimidazolium bistriflimide - EMIM-TFSI). The average interparticle interaction is found to be repulsive by small angle scattering of X-rays and of neutrons, with a second virial coefficient A2 = 7.3. A moderately concentrated sample at Φ = 5.95 vol% is probed by forced Rayleigh scattering under an applied magnetic field (up to H = 100 kA m-1) from room temperature up to T = 460 K. Irrespective of the values of H and T, the NPs in this study are always found to migrate towards the cold region. The in-field anisotropy of the mass diffusion c…
Towards enhanced durability of electrochromic WO3 interfaced with liquid or ceramic sodium-based electrolytes
2020
Abstract The reversible intercalation of sodium ion into tungsten oxide WO3 appears as an interesting alternative to hydrogen or lithium ion reduction in order to get the characteristic transition from clear transparent to bluish coloration in electrochromic devices, but it has been comparatively less considered. In order to address further viable all-ceramic devices based on sodium ion intercalation and overcome the issue of WO3 degradation in aqueous media, three configurations of WO3 thin film-based electrochromic half-cells were tested, namely in (i) aqueous acidified Na2SO4 electrolyte, (ii) room temperature ionic liquid BEPipTFSI electrolyte and (iii) aqueous acidified Na2SO4 electrol…
Task-specific ionic liquid for the depolymerisation of starch-based industrial waste into high reducing sugars
2014
Development of a simple route for the catalytic conversion of starch-based industrial waste (potato peels) and potato starch into reducing sugars was investigated in two ionic liquids for comparison – 1-allyl-3-methylimidazolium chloride [AMIM]Cl and 1-(4-sulfobutyl)-3-methylimidazolium chloride [SBMIM]Cl. Over a two hour period, a 20 wt% solution containing up to 43% and 98% of reducing sugars at low temperature in aqueous [SBMIM]Cl was achieved for the starch-based waste and the potato starch, respectively. In addition, the use of microwave and low frequency ultrasound to perform the depolymerisation of the raw starch-based material was explored and compared with conventional heating proc…
Supported ionic liquid asymmetric cathalysis. A new method for chiral catalyst recycling
2004
A new method for chiral catalysts recycling, based on the supported ionic liquid asymmetric catalysis concept, has been developed. This concept involves the treatment of a monolayer of covalently attached ionic liquid on the surface of silica gel with additional ionic liquid. These layers serve as the reaction phase in which the homogeneous chiral catalyst is dissolved. As first application of this concept the L-proline-catalyzed aldol reaction has been carried out. Good yields and ee values, comparable with those obtained under homogeneous conditions have been obtained. Moreover, this material shows high regenerability.
Antimicrobial and antioxidant supramolecular ionic liquid gels from biopolymer mixtures
2023
In this work, we describe the preparation and characterization of supramolecular ionic liquid gels based on binary mixtures of biopolymers, comprising chitosan, chitin, cellulose and lignin. The gels were obtained in ionic liquids differing in the cation or the anion, with no need for a cross-linking agent or acid treatment. The materials obtained were characterized for the minimum gelation concentration, porosity, swelling and rheological properties, finding a prominent influence of the nature of the ionic liquid anion. Then, we investigated the ability of the gels to scavenge free radicals, finding that the gels exhibit a higher antioxidant ability than their individual components. Moreov…