Search results for "ionic"

showing 10 items of 2016 documents

Comparative study of Zorbax Bio Series GF 250 and GF 450 and TSK-Gel 3000 SW and SWXL columns in size-exclusion chromatography of proteins.

1988

Abstract A reduction of the mean particle diameter of silica-based packings in the size-exclusion chromatography (SEC) of proteins to about 5 μm generates the expected increase in column plate number over the traditional 10 μm SEC columns, as demonstrated for the Zorbax Bio Series GF 250 and GF 450 and TSK-Gel 3000 SWXL columns. The slightly lower column efficiency of the TSK-Gel 3000 SWXL compared with the GF 250 column is compensated by the fact that the phase ratio of the 3000 SWXL column is higher by a factor of two. Hence both columns show nearly the same peak capacity of about 20–30. When the ionic strength of the eluent was changed by varying the salt concentration, the elution volum…

ChromatographyElutionChemistryOrganic ChemistrySize-exclusion chromatographyAnalytical chemistryProteinsDextransGeneral MedicineSilicon DioxideBiochemistryAnalytical ChemistryMolecular WeightColumn chromatographyIonic strengthPhase ratioParticle diameterChromatography GelPeptidesChromatography High Pressure LiquidJournal of chromatography
researchProduct

Electrochemical Synthesis of d,l-Homocysteine Thiolactone Hydrochloride in a Batch Continuous Recirculation Reactor Equipped with Carbon Felt Cathode…

2007

The electrochemical reduction of D,L-homocystine hydrochloride to the corresponding cysteine was performed in a batch continuous recirculation reaction system that was equipped with a FM01-LC electrochemical reactor. Electrolyses were performed under amperostatic conditions, using carbon felt cathodes and DSA anodes divided by Nafion 324 cationic membranes. A simple reactor mathematical model was used to assess the effect of operative parameters (the initial substrate concentration, the reaction temperature, the current density, and the linear velocity of the catholyte) on the performances of the process, with the objective of determining the optimized conditions to perform the electrosynth…

ChromatographyGeneral Chemical EngineeringCationic polymerizationGeneral ChemistryElectrochemistryIndustrial and Manufacturing EngineeringCathodelaw.inventionAnodechemistry.chemical_compoundMembranechemistryChemical engineeringlawNafionElectrodeThiolactoneIndustrial & Engineering Chemistry Research
researchProduct

Ion-exchange voltammetry at a surfactant-doped electrode: model of mass transfer kinetics to an anionic surface-charged electrode and its application…

2000

cited By 10; International audience; A theoretical model of mass transfer kinetics was developed for investigating the accumulation of cationic compounds at an anionic surfactant-doped screen-printed electrode. It was extended to an enzyme-generated cationic product for the indirect determination of alkaline phosphatase (AP). The model takes into account the analyte depletion, the kinetics of the ion-exchange reaction-diffusion and the kinetics of the enzymatic reaction. The relationship between the ion-exchange voltammetric anodic peak current and the enzyme incubation/accumulation time for a given concentration of AP was established and the validity of the theoretical model was verified e…

ChromatographyIon exchangeGeneral Chemical EngineeringKineticsInorganic chemistryCationic polymerizationSubstrate (chemistry)02 engineering and technologyBuffer solution010402 general chemistry021001 nanoscience & nanotechnology01 natural sciences0104 chemical sciencesAnalytical ChemistryElectrochemical gas sensorchemistry.chemical_compoundchemistryElectrodeElectrochemistry[CHIM]Chemical Sciences0210 nano-technologyVoltammetry
researchProduct

Modelling of retention behaviour of solutes in micellar liquid chromatography

1997

In micellar liquid chromatography (MLC), the resolution for a given multi-component mixture can be optimized by changing several variables, such as the concentrations of surfactant and organic modifier, the pH and temperature. However, this advantage can only be fully exploited with the development of mathematical models that describe the retention and the separation mechanisms. Several reports have appeared recently on the possibilities of accurately predicting the solute retention in MLC. Although the retention and selectivity may strongly change with varying concentrations of surfactant, organic modifier and/or pH, the observed changes are very regular, and are well described by simple m…

ChromatographyMathematical modelResolution (mass spectrometry)ChemistryOrganic ChemistryGeneral MedicineBiochemistryHigh-performance liquid chromatographyAnalytical ChemistryPulmonary surfactantMicellar liquid chromatographyIonic strengthCritical micelle concentrationSelectivityJournal of Chromatography A
researchProduct

Improving the solid-phase extraction of “quat” pesticides from water samples

1998

A novel strategy, based on the addition of a cationic surfactant, for preventing the interferences associated with a diminution in the efficacy of solid-phase extraction (SPE) with silica cartridges of diquat, paraquat and difenzoquat in water is developed. Conditions for extraction are optimised with respect to pH, cationic surfactant and its concentration. Humic acids, anionic surfactants, inorganic salts and other organic contaminants like pesticides, phenols, polycyclic aromatic hydrocarbons and polychlorinated biphenyls produce the studied interferences. The best performance is shown in the improvement of the "quats" recovery from waters with high levels of humic acids and anionic surf…

ChromatographyOrganic ChemistryCationic polymerizationGeneral MedicineBiochemistryDiquatAnalytical Chemistrychemistry.chemical_compoundchemistryPulmonary surfactantEnvironmental chemistrymedia_common.cataloged_instanceSample preparationPhenolsSolid phase extractionEuropean unionWater pollutionmedia_commonJournal of Chromatography A
researchProduct

Ionomers in solution: 1. Viscometric and chromatographic studies in cononsolvent and cosolvent mixtures

1997

Abstract The viscosity and elution behaviour of polystyrene sulfonate ionomers with varying ionic content has been studied in the pure solvents chloroform (CHL), tetrahydrofuran (THF), dioxan (DIO), ethyl acetate (EA) and dimethylformamide (DMF) as well as in their cononsolvent mixtures CHL/THF (50:50), DIO/CHL (75:25) and in the cosolvent mixture EA/DMF (50:50). In the pure solvents with low dielectric constant the reduced viscosities of ionomers are lower at low concentrations and higher at moderate ones than the respective viscosities of the polystyrene precursor. These results can be explained by formation of intramolecular and intermolecular associations. Moreover, differences in visco…

ChromatographyPolymers and PlasticsOrganic ChemistryConcentration effectIonic bondingPolyelectrolytePolystyrene sulfonatechemistry.chemical_compoundchemistryPolymer chemistryMaterials ChemistryDimethylformamidePolystyreneIonomerTetrahydrofuranPolymer
researchProduct

Ionic Liquid Based Headspace Solid-Phase Microextraction-Gas Chromatography for the Determination of Volatile Polar Organic Compounds

2010

Solid-phase microextraction (SPME) with an ionic liquid (IL) coating was developed for headspace extraction of a group of low molecular weight alcohols (ethanol, n-propanol, butanol, and isopropyl alcohol), acetone, ethyl acetate, and acetonitrile. A first SPME fiber was simply coated with a dedicated IL whose synthesis is described. A second SPME fiber was prepared by gluing silica (Si) particles on which the synthesized IL was chemically bonded. The analytes SPME extraction was optimized for time, temperature, and NaCl salting out content. The headspace extracted analytes were determined by simple temperature desorption into the hot injection port of a gas chromatograph. The coated-IL fib…

ChromatographyProcess Chemistry and TechnologyGeneral Chemical EngineeringExtraction (chemistry)Ethyl acetateFiltration and SeparationIsopropyl alcoholGeneral ChemistrySolid-phase microextractionchemistry.chemical_compoundchemistryIonic liquidSalting outFiberGas chromatographySeparation Science and Technology
researchProduct

Protocol to compare column performance applied to hydrophilic interaction liquid chromatography

2019

Abstract The lack of retention of highly polar solutes in liquid chromatography with reversed phase columns (RPLC) can be solved through the use of the hydrophilic interaction liquid chromatographic (HILIC) mode. Due to the complexity of the separation mechanisms in HILIC and the different factors that may have significant influence, the selection of the appropriate stationary phase plays a fundamental role in the development of analytical procedures to obtain good performance. In this work, the chromatographic performance of bare silica and six polar stationary phases with different functionalized groups (with neutral, cationic, anionic and zwitterionic character) are investigated. The beh…

ChromatographyResolution (mass spectrometry)ChemistryHydrophilic interaction chromatography010401 analytical chemistryCationic polymerization02 engineering and technology021001 nanoscience & nanotechnology01 natural sciences0104 chemical sciencesAnalytical ChemistryColumn (typography)Phase (matter)PolarAnalytical procedures0210 nano-technologySelectivitySpectroscopyMicrochemical Journal
researchProduct

Assessment and optimization of system parameters in size exclusion separation of proteins on diol-modified silica columns

1981

Abstract On diol-modified silica columns the retention of proteins is governed by a size exclusion effect, but superimposed on this are some secondary effects, i.e. , ionic and diol-ligand interactions which can be controlled and adjusted reproducibly by varying the eluent composition. The eluent composition also affects the column efficiency and peak shape. Both dependences can be employed to obtain a better resolution of proteins than can be expected from size exclusion alone.

ChromatographyResolution (mass spectrometry)fungiOrganic ChemistrySize-exclusion chromatographyDiolAnalytical chemistryfood and beveragesIonic bondingGeneral MedicineBiochemistryAnalytical Chemistrychemistry.chemical_compoundColumn chromatographychemistrySystem parametersJournal of Chromatography A
researchProduct

Hydrolytically stable chemically bonded silica supports with metal complexating ligands: Synthesis, characterization and use in high-performance liga…

1982

A silica of 14 nm pore size was reacted according to two procedures with the following silanes: γ-aminopropyltriethoxysilane (1), N-aminoethyl-N′-aminopropyltrimethoxysilane (2), N-aminoethyl-N′-aminoethyl-N″-aminopropyltrimethoxysilane (3), N-(3-triethoxysilanepropyl)-N, N-diacetic dimethylester (4), N-(3-trisodiumsilanolatepropyl)-N, N-diacetic acid disodium salt (5) and N-(3-trisodiumsilanolatepropyl)-ethylenediamine-N, N′, N′-triacetic acid trisodium salt (6). The reaction of silanes 1–4 with the silica was carried out under anhydrous conditions (procedure A). Silanes 1–6 were subjected to surface modification under essentially hydrous conditions applying a two-step procedure (procedure…

ChromatographySilanesChemistryLigandOrganic ChemistryClinical BiochemistryInorganic chemistrySorptionBiochemistrySilaneAnalytical Chemistrychemistry.chemical_compoundColumn chromatographyIonic strengthAnhydrousSurface modificationChromatographia
researchProduct