Search results for "laminate"
showing 10 items of 129 documents
Investigation on the influence of the surface resin rich layer on the thermoelastic signal from different composite laminate lay-ups
2006
This work presents a set of experimental results based on the measured thermoelastic signal from GRP composite coupons adopting different lay-ups. A comparison is made with the thermoelastic signal predicted by two different analytical models: one based on the classical law of the thermoelastic effect for orthotropic materials, and the other based on a novel theory accounting for the presence of a resin layer on the external surface of the composite structure. The composite coupons were designed such to determine a significant difference in the predictions made by the two theoretical models. Experimental results have shown a far better match with the predictions based on the novel theory ac…
Thermal and hydrothermal ageing of bio-based composite/metal hybrid materials. Application to the development of ultra-light and durable street furni…
2021
In the perspectives of the future city, the progressive use of autonomous vehicles seems to become unavoidable. The preparation of an adequate framework for the deployment of this future mobility represents an important issue. This requires revisiting the urban infrastructures of cities from the choice of material to the design, and to propose solutions based on mobile street furniture. Faced with this challenge, hybrid materials such fibre metal laminates (FML) present interesting characteristics. FML made of plant fibre composites are of particular interest to minimize their environmental impact. Thus, the objective of this thesis is to design and manufacture plant-fibre metal laminates a…
An analytical solution for multilayered beams subjected to ends loads
2014
An alternative model for multilayered beams undergoing axial, shear and bending loads applied at the beam's ends is developed. It is based on a layer-wise kinematics, which inherently fulfills the equilibrium equations at layer level and the interface continuity conditions. This kinematics is suitably expressed by introducing a set of generalized variables representative of the beam midline displacement field, which become the primary variables of the problem governing equations. As a consequence, the proposed beam model exhibits the computational characteristics of an equivalent single layer model and possesses the accuracy of layer-wise beam theories, as well. Closed form solutions for di…
A one-dimensional model for dynamic analysis of generally layered magneto-electro-elastic beams
2013
Abstract A new one-dimensional model for the dynamic problem of magneto-electro-elastic generally laminated beams is presented. The electric and magnetic fields are assumed to be quasi-static and a first-order shear beam theory is used. The electro-magnetic problem is first solved in terms of the mechanical variables, then the equations of motion are written leading to the problem governing equations. They involve the same terms of the elastic dynamic problem weighted by effective stiffness coefficients, which take the magneto-electro-mechanical couplings into account. Additional terms, which involve the third spatial derivative of the transverse displacement, also occur as a result of the …
Depth profiling of Al2O3 + TiO2 nanolaminates by means of a time-of-flight energy spectrometer
2011
Atomic layer deposition (ALD) is currently a widespread method to grow conformal thin films with a sub-nm thickness control. By using ALD for nanolaminate oxides, it is possible to fine tune the electrical, optical and mechanical properties of thin films. In this study the elemental depth profiles and surface roughnesses were determined for Al2O3 + TiO2 nanolaminates with nominal single-layer thicknesses of 1, 2, 5, 10 and 20 nm and total thickness between 40 nm and 60 nm. The depth profiles were measured by means of a time-of-flight elastic recoil detection analysis (ToF-ERDA) spectrometer recently installed at the University of Jyväskylä. In TOF-E measurements 63Cu, 35Cl, 12C and 4He ions…
Depth profiling of Al2O3+ TiO2 nanolaminates by means of a time-of-flight energy spectromete
2011
Atomic layer deposition (ALD) is currently a widespread method to grow conformal thin films with a sub-nm thickness control. By using ALD for nanolaminate oxides, it is possible to fine tune the electrical, optical and mechanical properties of thin films. In this study the elemental depth profiles and surface roughnesses were determined for Al2O3 + TiO2 nanolaminates with nominal single-layer thicknesses of 1, 2, 5, 10 and 20 nm and total thickness between 40 nm and 60 nm. The depth profiles were measured by means of a time-of-flight elastic recoil detection analysis (ToF-ERDA) spectrometer recently installed at the University of Jyväskylä. In TOF-E measurements 63Cu, 35Cl, 12C and 4He ions…
Effects of shape of transverse cross-section on the load carrying capacity of laminated glass columns
2014
Abstract In this paper simplified expressions for the calculus of the load carrying capacity of glass columns having rectangular, tee (T) and cruciform (X) transverse cross-sections are proposed and verified against available experimental data. Members with T and X cross-sections are obtained by gluing single multilayered glass panels. The expressions derived take into account of the: shape of the transverse cross-section (rectangular, T, and, X sections); buckling phenomenon (flexural and torsional); failure in the glued sections; long time effects. Case of full connections and absence of connections are considered to determine the range of variation of expressions adopted. The comparison …
Effects of fiber orientation of adjacent plies on the mode I crack propagation in a carbon-epoxy laminates
2011
Abstract The influence of ply orientation on the resistance to mode I delamination of multidirectional composite laminates can be assessed by Double Cantilever Beam (DCB) tests. However, one of the difficulties associated with such a study is the change in overall elastic parameters occurring when modifying local ply orientations. The present work uses laminates with special stacking sequences allowing for isolating the orientation parameter. Multidirectional DCB specimens were designed so as to obtain an uncoupled quasi isotropic and quasi-homogeneous elastic behavior, with the same properties for the entire laminate and the two sub laminates separated by the pre crack at mid-plane. The re…
An equivalent single-layer model for magnetoelectroelastic multilayered plate dynamics
2012
Abstract An equivalent single-layer model for the dynamic analysis of magnetoelectroelastic laminated plates is presented. The electric and magnetic fields are assumed to be quasi-static and the first-order shear deformation theory is used. The formulation of the model provides for a preliminary fulfillment of the electro-magnetic governing equations, which allows to determine the electric and magnetic potential as functions of the mechanical variables. Then, by using this result, the equations of motion are written leading to the problem governing equations. They involve the same terms of the elastic dynamic problem weighted by effective stiffness coefficients, which take the magneto-elect…
Exact 3D solution for static and damped harmonic response of simply supported general laminates
2014
International audience; The state-space method is adapted to obtain three dimensional exact solutions for the static and damped dynamic behaviors of simply supported general laminates. The state-space method is written in a general form that permits to handle both cross-ply and antisymmetric angle-ply laminates. This general form also permits to obtain exact solutions for general laminates, albeit with some constraints. For the general case and for the static behavior, either an additive term is added to the load to simulate simply supported boundary conditions, or the plate bends in a particular way. For the dynamic behavior, the general case leads to pairs of natural frequencies for each …