Search results for "laminates"
showing 10 items of 73 documents
Influence of Nylon 6,6 nanofiber mats on cure behavior and properties of CFR epoxy resin
2014
In this work Nylon 6,6 nanofibrous mats produced by electrospinning were used as interlayers in carbon fiber reinforced laminates. A high crossilinked epoxy resin was chosen as matrix. The effects of polymeric mats on cure behavior, thermal and delamination properties of the composite laminates were investigated.
A two-node finite element for linear magneto-electric laminated timoshenko beams
2012
A new finite element is presented for linear magnetoelectric straight laminated beam subject to the assumptions of quasi-steady electromagnetic state. The mechanical model is based upon Timoshenko beam theory to account for shear deformation influences. The electromagnetic stacking sequence is proved to enter the equivalent elastic problem by affecting both the stiffness properties of the beam, in terms of axial and flexural coupling, and by modifying the mechanical boundary conditions as distributed loads. Shape functions are first written for the generalized beam mean-line kinematical quantities in such a way the obtained strain field fulfills the homogeneous governing equations of the eq…
IMPLEMENTAZIONE DI TECNICHE NDT DI TERMOGRAFIA AD INFRAROSSI SU PANNELLI IN COMPOSITO GRP PER APPLICAZIONI NAUTICHE
2010
Il presente lavoro descrive l’implementazione di due tecniche di termografia attiva ad infrarossi per il controllo non distruttivo (IRNDT) di delaminazioni sub-superficiali su pannelli in composito (GRP) di grosso spessore, tipicamente impiegati per uso navale. Si è in particolare fatto uso di attrezzature a basso costo consistenti in comuni lampade alogene a bassa potenza come sorgenti di calore esterne, ed una termocamera ad infrarossi a singolo sensore a bassa risoluzione termica e basso frame rate. Le due tecniche implementate sono la Pulsed Thermography (PT) ed una nuova variante di Lock-In Thermography denominata Pulse-Modulated Lock-In Thermography (PMLT), basata sull’analisi in freq…
IMPLEMENTAZIONE DI TECNICHE DI TERMOGRAFIA ATTIVA IRNDT SU COMPOSITI GRP MEDIANTE LA DEPOSIZIONE DI IMPULSI TERMICI DI LUNGA DURATA
2011
Nel presente lavoro viene analizzata l’implementazione di tecniche attive di termografia ad infrarossi per analisi NDT su pannelli in composito. In particolare si propone l’uso di lampade alogene come sorgente di calore esterna, le quali richiedono tempi di accensione dell’ordine di diversi secondi al fine di depositare efficaci quantità di calore. Si discutono quindi le problematiche connesse all’implementazione di tecniche di Transient Thermography e di Lock-In Thermography in presenza di tempi lunghi di deposizione di calore. Viene implementata una tecnica di modulazione della deposizione di calore mediante treni di onde quadre di lunga durata (PMLT - Pulse Modulated Lock-In Thermography…
Composite laminates buckling optimization through Levy based Ant Colony Optimization
2010
In this paper, the authors propose the use of the Levy probability distribution as leading mechanism for solutions differentiation in an efficient and bio-inspired optimization algorithm, ant colony optimization in continuous domains, ACOR. In the classical ACOR, new solutions are constructed starting from one solution, selected from an archive, where Gaussian distribution is used for parameter diversification. In the proposed approach, the Levy probability distributions are properly introduced in the solution construction step, in order to couple the ACOR algorithm with the exploration properties of the Levy distribution. The proposed approach has been tested on mathematical test functions…
Modelling unilateral damage effect in strongly anisotropic materials by the introduction of the loading mode in damage mechanics
1999
Abstract Damage weakens the mechanical characteristics of materials. But this weakening can disappear if the cracks close again: this is called the unilateral effect of damage. We propose a model of this phenomenon using damage mechanics in the case of a diffuse network of identical microcracks. The microcracks state is defined with two internal state variables. These two variables are control parameters of the geometry of the microcracks. They also define the loading mode in damage mechanics as in fracture mechanics. In order to limit the anisotropy induced by the microcracks, hence by the loading, we suppose that the geometry of damage spreads into preferential directions. Therefore, this…
Boundary Integral Formulation for Composite Laminates in Torsion
1997
The three-dimensional elastic stress state in a general composite laminate under twisting load is given. The analysis is carried out through an integral equation formulation that is numerically solved by the boundary element method. The integral representation of the elastic behavior is deduced by means of the reciprocity theorem applied to the actual response of each ply and the problem's analytical singular fundamental solutions. The interface continuity conditions due to perfect bonding are considered to complete the laminate mathematical model. The method permits the analysis for generally stacked laminates having general shape of the cross section. By virtue of the formulation characte…
Stress fields in general composite laminates
1996
A direct approach is employed to obtain a general boundary integral formulation for the analysis of composite laminates subjected to uniform axial strain. The integral equations governing the problem are directly deduced from the reciprocity theorem, employing the generalized orthotropic elasticity fundamental solutions expressly inferred. The solution is achieved by the boundary element method, which gives, once the traction-free boundary conditions and the interfacial continuity conditions are enforced, a linear system of algebraic equations. The formulation does not present restrictions with regard to the laminate stacking sequence and it does not require any aprioristic assumption. The …
Surface Anisotropy in the Expansion Behavior of Laminated Quasi-Isotropic Composites
1984
Mesure a l'aide d'un extensometre des deformations thermiques superficielles de deux materiaux stratifies resine epoxy-fibre de graphite. Les resultats dependent de la direction de mesure, l'anisotropie superficielle associee est inversement proportionnelle aux dimensions de l'echantillon et proportionnelle au rapport d'anisotropie d'une lamelle isolee. Comparaison avec la theorie des stratifications
Investigation on the influence of the surface resin rich layer on the thermoelastic signal from different composite laminate lay-ups
2006
This work presents a set of experimental results based on the measured thermoelastic signal from GRP composite coupons adopting different lay-ups. A comparison is made with the thermoelastic signal predicted by two different analytical models: one based on the classical law of the thermoelastic effect for orthotropic materials, and the other based on a novel theory accounting for the presence of a resin layer on the external surface of the composite structure. The composite coupons were designed such to determine a significant difference in the predictions made by the two theoretical models. Experimental results have shown a far better match with the predictions based on the novel theory ac…