Search results for "laser"

Carbon nanotubes embedded in a polyimide foil for proton acceleration with a sub-ns laser

2021

A series of thin films made of aligned carbon nanotubes (CNTs) embedded in a polyimide substrate was designed, fabricated and used for the first time to accelerate protons and C ions by interaction with a sub-nanosecond, high power laser beam (600 J energy and 300 ps pulse width) with peak intensity of about 3 × 1016 W/cm2 on target. Each target was 5 μm thick, and the composite material contained CNTs aligned in different directions in the substrate. The results obtained from the analysis of a Thomson Parabola spectrometer, and of the spots imprinted by ions on a series of PM355 nuclear track detectors, indicate high energies (up to 3 MeV for protons and 9 MeV for C ions) and a marked infl…

Optimization of a hot-cavity type resonant ionization laser ion source

2015

TuePS05; International audience; Resonant Ionization Laser Ion Source (RILIS) is nowadays an important technique in many RadioactiveIon Beam (RIB) facilities for its reliability and ability to ionize efficiently and element selectively.Grand Accélérateur National d’Ions Lourds (GANIL) Ion Source using Electron Laser Excitation(GISELE) is an off-line test bench for RILIS developed to study a fully operational resonant laserion source at GANIL facility. The ion source body has been designed as a modular system toinvestigate different experimental approaches by varying the design parameters, to develop the futureon-line laser ion source. The aim of this project is to determine the best technic…

Response of the oxygen sensor NreB to air in vivo: Fe-S-containing NreB and apo-NreB in aerobically and anaerobically growing Staphylococcus carnosus.

2009

ABSTRACT The sensor kinase NreB from Staphylococcus carnosus contains an O 2 -sensitive [4Fe-4S] 2+ cluster which is converted by O 2 to a [2Fe-2S] 2+ cluster, followed by complete degradation and formation of Fe-S-less apo-NreB. NreB·[2Fe-2S] 2+ and apoNreB are devoid of kinase activity. NreB contains four Cys residues which ligate the Fe-S clusters. The accessibility of the Cys residues to alkylating agents was tested and used to differentiate Fe-S-containing and Fe-S-less NreB. In a two-step labeling procedure, accessible Cys residues in the native protein were first labeled by iodoacetate. In the second step, Cys residues not labeled in the first step were alkylated with the fluorescent…

Isotope shifts and hyperfine structure in the transitions of stable calcium isotopes and calcium-41

1998

Isotope shifts and hyperfine structure in the 4s2 1S0 → 4s4p 1P1 and 4s2 1S0 → 4s4d 1D2 transitions of calcium have been measured with high-precision laser spectroscopy. Calcium atoms in an atomic beam were excited with single-frequency cw dye and titanium sapphire lasers and then photoionized with the 363.8 nm or 514.5 nm line of an argon ion laser. The resulting ions were analyzed and detected with a quadrupole mass spectrometer. Isotope shifts for all stable calcium isotopes and the radionuclide 41Ca have been measured in both transitions. The corresponding field shift and specific mass shift coefficients as well as hyperfine structure constants for the isotopes 41, 43Ca have been derive…

Laser spectroscopy of radioactive Ti, Zr and Hf isotopes and isomers at the JYFL laser-IGISOL facility

2003

Abstract The recent progress at the laser-ion guide isotope separator on-line facility, JYFL, is presented. At the facility new techniques for studying short-lived radioisotopes by laser spectroscopy have been developed and applied to the study of isotopes in refractory metal elements. In particular, recent results on the spectroscopy of cooled ion beams of radioactive Ti, Zr and Hf isotopes are discussed.

A mass-independent expanded Dunham analysis of aluminum monoxide and aluminum monosulfide

2018

Abstract Pure rotational transitions of 27Al16O, 27Al18O, 27Al32S, and 27Al34S are recorded in the vibrational ground state and singly excited vibrational state using a mm-wavelength supersonic jet spectrometer in combination with a laser ablation source. In total 275 rotational transitions have been assigned. For the first time, mass-independent expanded Dunham analyses are performed using isotopologues of aluminum monoxide and aluminum monosulfide. The breakdown of the Born-Oppenheimer approximation is observed. Based on these mass-independent analyses, frequency positions of pure rotational transitions of the rare radioactive isotopologues 26AlO and 26AlS are predicted with uncertainties…

A theoretical model for laser and powder particles interaction during laser cladding

2002

Abstract Interactions between the laser and the powder particles lead to attenuation of the laser and make the powder particles temperatures raise. According to given stream spread and speed of the powder particles, their temperature distribution at the surface of the workpiece is calculated. The attenuation of the laser induced by the cloud is also computed. These results are plotted for the case of a Gaussian distribution. Results show that with the increasing of the powder jet incidence angle, both temperature distribution of powder particles and attenuation of the laser have very different profiles. Their effects on the clad should be considered for modelling of laser cladding.

An overview of new joining technologies in aerostructures: laser beam welding and friction stir welding

2009

Fabrication and Characterization of Epitaxial NbN/TaN/NbN Josephson Junctions Grown by Pulsed Laser Ablation

2009

We report fabrication and characterization of epitaxial NbN/TaN/NbN Josephson junctions grown by pulsed laser ablation. These SNS junctions can be used as elements of rapid-single-flux-quantum (RSFQ) logic, which is a promising technology for high speed digital electronic devices. The NbN/TaN/NbN trilayer films were prepared on a single crystal MgO substrate by pulsed laser ablation, and patterned into junctions using a novel process utilizing e-beam lithography, chemical vapor deposition and e-beam evaporation. The quality of junctions was tested by measuring the temperature dependence of the junctions' IcRn values, observed to be quite close to theoretical values.

The polyphasic Protocol for the Keloid

2022

The occurrence of keloids is a common clinical problem that can cause functional impairment and cosmetic deformities. They are pathological cutaneous scars that occur due to surgery, burns or other traumatic wounds. Keloids are manifestations of a loss of the control mechanism that regulates wound repair (inflammation, neoangiogenesis and synthesis of extracellular matrix). The authors present their polyphasic protocol for the treatment of keloids: it consists of a combination of intralesional excision, steroid injections and dye-laser treatment over a period of four months. In our research, we have selected patients who have been clinically diagnosed to have keloid scars, which have been d…