Search results for "layer"

Bilayer graded Al/B4C/rice husk ash composite: Wettability behavior, thermo-mechanical, and electrical properties

2018

In this study, wettability behavior of B4C substrate as well as B4C/crystalline rice husk ash and B4C/amorphous rice husk ash substrates with two aluminum alloys were studied. The electrical resistivity, thermal expansion coefficients, and thermal diffusivity of bilayer Al/B4C/rice husk ash composite fabricated by one-step pressureless infiltration were measured and the obtained data were systemically analyzed using the Taguchi method and analysis of variance. Boron carbide substrates after addition of amorphous or crystalline rice husk ash display good wettability with molten aluminum alloys. The results show that, electrical resistivity of Al/B4C/rice husk ash composites is mainly influe…

Scale composition and oxidation mechanism of the Ti–46Al–8Nb alloy in air at 700 and 800 °C

2011

It is known that the oxide scale formed on TiAl alloys is generally composed of a mixture of alumina (Al2O3) and titania (TiO2). The presence of niobium changes the activities of Ti and Al and influences the kinetics of oxidation and oxide layer composition. In this work, the Tie46Ale8Nb alloy was subjected to cyclic oxidation in air at 700 � C (for 2 and 24 h) and 800 � C (for 300 h). Scale composition was analyzed by means of different techniques including X-ray photoelectron spectroscopy, X-ray diffraction and secondary ion mass spectroscopy. The scale consisted of several layers. The outer layer was built of alumina (amorphous or with very fine grains), whereas the inner layer e mainly …

Developing a procedure to optimize electroless deposition of thin palladium layer on anodic alumina membranes

2006

In recent years, the increased demand for hydrogen in many industrial applications, like petrochemical and semiconductor processing, and sustainable energy (fuel cells) has led to a renewed interest in methods for separation and purification of hydrogen from gas mixtures. In particular, palladium-based membranes have been the subject of many studies, due to their potential use as hydrogen-selective membranes for gas separation or purification [1,2]. Owing to the high cost of palladium and in order to increase the flow rate of hydrogen, composite membranes, formed by a thin layer of palladium deposited on a porous support, are largely preferred to thick self-standing metal membranes. Differe…

Metallic interconnects for solid oxide fuel cell: Performance of reactive element oxide coating during long time exposure

2011

One of challenges in improving the performance and cost-effectiveness of SOFCs (solid oxide fuel cells) is the development of suitable interconnects materials. Chromia-forming alloys and especially ferritic stainless steels, like Crofer22APU, are considered to be among the most promising candidate materials as interconnects in SOFC stacks. However, the performance of chromia-forming materials can be limited by the low electronic conductivity of the oxide scale (high ASR – area specific resistance – value). Such degradation are unacceptable regarding the long-term operation (>40 000 h). A previous study 1 demonstrated that in air, the addition of a nanometric reactive element oxide (La2O3) l…

Frictional behaviour of oxygen diffusion hardened titanium in dry sliding against Co–28Cr–5W–4Fe–3Ni–1Si cobalt alloy

2004

Abstract The results of conformal pin-on-disc tribological tests of a hard layer of the solid solution of oxygen in α-titanium sliding against a Co–28Cr–5W–4Fe–3Ni–1Si cobalt alloy counterspecimen are presented. The α-Ti(O) layer was diffusely produced over 2–8 h of oxidising in the superficial zone of a technical quality titanium specimen. The friction and wear responses of the system were recorded and the wear mechanisms were studied. Investigations of the material structure and chemical constitution in micro-areas of the titanium specimen, cobalt alloy counterspecimen and wear debris formed in dry sliding were performed with a Philips XL20 microscope equipped with an EDAX analyser. Crush…

Structural and spectral properties of ZnO nanorods by wet chemical method for hybrid solar cells applications

2015

Abstract The synthesis of ZnO nanorods on transparent conducting oxides, Al doped ZnO seed layer on glass substrate (AZO) and indium tin oxide substrate (ITO) by using zinc nitrate hexahydrate (Zn (NO3)2·6H2O) and hexamethylenetetramine (HMT, (CH2)6N4 as raw materials is presented. The ZnO seed layer was fabricated by depositing an Al-doped ZnO thin film on glass substrate by sputtering. The effect of seeding on (AZO) and (ITO) substrate by using the wet chemical route growth of ZnO nanorods was investigated. The synthesized nanostructures of ZnO were characterized by X-ray diffraction (XRD), UV–vis absorption spectroscopy, scanning electron microscopy (SEM) and high-resolution transmission…

Magnetic-Field-Induced Locomotion of Glass Fibers on Water Surfaces: Towards the Understanding of How Much Force One Magnetic Nanoparticle Can Deliver

2009

Spray pyrolytic deposition of ZnO thin layers composed of low dimensional nanostructures

2010

Abstract ZnO nanolayers composed of fine nanostructures have been successively grown by spray pyrolytic deposition at 300  ∘ C over amorphous glass substrates. As deposited samples were analysed by scanning electron microscopy (SEM), showing a granular morphology with grain size in the limit of the microscope resolution. CL measurement shows a broad near band edge (3.4 eV) emission of ZnO in the UV region and the defect level emissions in the green region of the spectrum. The use of intermittent spray pyrolytic deposition is shown as an alternative to increase the homogeneity of the samples when temperatures near to the precursor pyrolytic decomposition is selected, long depositions times a…

Electrogeneration of Diiodoaurate in Dimethylsulfoxide on Gold Substrate and Localized Patterning

2016

International audience; A localized etching of gold surface by scanning electrochemical microscope technique is presented where a dimethylsulfoxide-based electrolyte charged with iodine is used. The electrogenerated triiodide ion at the platinum ultramicroelectrode tip (feedback mode) acts as an oxidant for gold surface. The effects of electrode diameter and the bias time have been investigated. The approach curve method was used to hold the electrode tip close to the gold surface. A scanning electron microscope is used to observe the etched gold surfaces where disk-shaped dots are generated. The diameter of these holes depends directly on the Pt electrode diameter and the bias time.

Growth mode and self-organization of LuPc2on Si(001)-2×1vicinal surfaces: An optical investigation

2012

We report an investigation of the initial growth and of the self-organization of lutetium biphthalocyanine LuPc2 on Si(001)-2 x 1 vicinal surfaces. Using surface-sensitive optical spectroscopies, namely, surface-difference-reflectance spectroscopy (SDRS) and reflectance-anisotropy spectroscopy (RAS), together with local-probe microscopies, we are able to propose a scenario for the growth mode up to about 20 nm. We demonstrate that the growth mode initially proceeds through the formation of a wetting layer, followed by the formation of clusters whose sizes increase while keeping a constant shape in which the molecules are inclined. Moreover, the LuPc2 molecules are self-organized along the s…